OKBA
OKBA 40 PCS White Mouse Pad 3mm Thick for Heat Press Printing
Bottom line: The OKBA 40 PCS White Mouse Pad 3mm Thick for Heat Press Printing ($23.98 on Amazon as of 2026-10-06): Sublimation-ready white polyester face takes any photo or logo print; main trade-off: 3mm (0.3cm) is thin next to gaming pads built for low-friction glides.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Sublimation-ready white polyester face takes any photo or logo print
- ✓ 22x18cm (8.66x7.08 in) suits standard wired, wireless, optical and laser mice
- ✓ Natural rubber base grips the desk so pressed pads stay put in use
Cons
- ✗ 3mm (0.3cm) is thin next to gaming pads built for low-friction glides
- ✗ Needs a heat press at 180-190C for 60-80 seconds, so no iron shortcut
- ✗ One fixed 22x18cm rectangle only, with no XL or desk-mat option
- ✗ 40-piece bulk count is more than a hobbyist printing a few gifts needs
SpecPicks Verdict
SpecPicks scored OKBA 40 PCS White Mouse Pad 3mm Thick for Heat Press Printing using a rating × review-volume × price-fit model applied to published specs and reviews across the gaming peripherals category. OKBA's gaming peripherals lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for gaming peripherals of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 【Package Contents】40 pcs rectangular white mouse pads, Product size :8.66x7.08x0.12 inches (22x18x0.3cm)
- 【Scope of application】Suitable for wired, wireless, optical, mechanical and laser mouse, can print any personal photo, company logo, and other images of your favorite promotions, gifts, personal mementos, art displays, etc
- 【Production process】can print any personalized picture on white polyester fabric; Pressing temperature :180-190℃(356-374°F) Pressing time :60-80 seconds
- 【Anti-slip Pad】Natural rubber base can firmly grip the desktop, prevent slipping. Soft material offers you a smooth and comfortable touch effect
- 【Easy to clean】The surface is specially designed, easy to clean, will not delay your work or play
Full Specifications
| Size | 7.1 x 8.6 x 0.12 inches |
|---|---|
| Brand | OKBA |
| Color | 40pcs *white Mouse Pad |
| Shape | Rectangular |
| Material | Rubber |
| Dimensions | 8.66x7.08x0.12 inch |
| Unit Count | 40.0 Count |
| Connectivity | Wireless |
| Model Number | 40pcs*Mouse Pad Blanks |
| Item Thickness | 3 Millimeters |
| Connection Type | Wired |
| Special Feature | Non-slip |
| Antenna Location | Office |
| Enclosure Material | Rubber |
| Additional Features | Non-slip |
| Warranty Description | No warranty |
| Item Dimensions L x W | 8.66"L x 7.08"W |
| Recommended Uses For Product | Office |
| Full listing title | 40 PCS White Mouse Pad 3mm Thick for Heat Press Printing,Bulk Mousepad Blanks for Heat Transfer Crafts 22x18x0.3CM |
Ready to buy?
40 PCS White Mouse Pad 3mm Thick for Heat Press Printing,Bulk Mousepad Blanks for Heat Transfer Crafts 22x18x0.3CM is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Gaming Peripherals
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- How to run DeepSeek-R1 32B on Arc B580
- Modder Runs a Counter-Strike Clone at 60 FPS on the Original PSP
- First PC Build Guide: Components, Budget & Aesthetics
- Best Gaming Headset for PlayStation 5 Under $80 (2026)
- Local AI on Raspberry Pi 5: Sourced Benchmarks for Llama, Phi, and Gemma (2026)
- Best Mini-ITX Case for a Small Form Factor Gaming PC in 2026
- Best SSD for a Raspberry Pi 4 Media Server in 2026
- How to run Qwen 3 32B on Apple M4 Max
- Raspberry Pi 4 8GB vs Pi 5 for a 2026 Homelab: Is the Pi 4 Still Worth It?
- Steam Deck LCD Battery Swollen: Diagnosis & Safe Fix Guide
- OpenAI Codex Now Drives Windows Autonomously: What It Means for Local AI Rigs
- Dual GPU Llama.cpp Speedup: What Actually Helps
- Dual Radeon AI PRO R9700 Workstation: 64 GB Local LLM Build
- Best Sim Racing Wheel for Beginners on PS5 & PC (2026)
- Raspberry Pi Projects for Students (2025 Guide)
- Build a 2001 GeForce 3 Windows 98 Gaming PC in 2026: Parts and Setup
- Best GPU for Gaming in 2026: Our Top 5 Picks Tested
- Crucial BX500 vs Samsung 970 EVO Plus: SATA vs NVMe Boot Drive
- Gemma 4 31B Heretic Finetune: Can It Run on a 12GB RTX 3060?
- Raspberry Pi Projects for Beginners: 6 No-Solder Builds
- Codex Now Drives Windows PCs: The Local-Agent Rig You Can Build Instead
- Logitech G29 / G920 Not Detected on Windows 11: Step-by-Step Driver Fix Guide (2026)
- Best Sim Racing Setup for 2026: Wheels, Shifters and Pedals
- Troubleshooting Voodoo 5 5500 PCI Driver Hangs on Windows 98 SE: Field Guide
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090