Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5 (Without SSD)
Bottom line: The Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5 ($7.96 on Amazon as of 2026-11-20 23:23 UTC): PCIe 3.0 up to 1231 MB/s vs 104 MB/s microSD, per Raspberry Pi docs; main trade-off: NVMe SSD not included, you supply the drive separately.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ PCIe 3.0 up to 1231 MB/s vs 104 MB/s microSD, per Raspberry Pi docs
- ✓ Fits 2230, 2242, 2260 and 2280 M.2 NVMe drives
- ✓ Works as bootable system disk or extra storage drive
- ✓ Tool-light install: screws plus ribbon cable, top or bottom mount
Cons
- ✗ NVMe SSD not included, you supply the drive separately
- ✗ Not compatible with M.2 SATA SSDs, NVMe only
- ✗ Raspberry Pi 5 only, no support for earlier Pi models
- ✗ 1231 MB/s is a rated ceiling; real speeds usually run lower
Manufacturer description
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (SDR104: 104 MB/s max) to SSD (PCIe 2.0: 500 MB/s max, PCIe 3.0: 1231 MB/s max) (Note: The max speed is declared by the Raspberry Pi documentation, usually unable to achieve) Compatible SSDs: M.2 NVMe SSDs, PCIe 2.0 or 3.0, size 2230 / 2242 / 2260 / 2280 (Note: NOT compatible with M.2 SATA SSDs) Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5, so this read rests on the manufacturer's listed specs and the current price in the single-board computers category (how we evaluate). Compare with similarly-priced alternatives in the single-board computers category before committing. On the listing's own facts, the case for it is "PCIe 3.0 up to 1231 MB/s vs 104 MB/s microSD, per Raspberry Pi docs"; the main trade-off is "NVMe SSD not included, you supply the drive separately". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, confirm the board side: this card needs a free PCIe slot of the width the card uses. Your motherboard manual lists which slots share lanes with M.2 sockets or other slots. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Big Upgrade: Boost your system to an amazing speed by upgrading memory card (SDR104: 104 MB/s max) to SSD (PCIe 2.0: 500 MB/s max, PCIe 3.0: 1231 MB/s max) (Note: The max speed is declared by the Raspberry Pi documentation, usually unable to achieve)
- Compatible SSDs: M.2 NVMe SSDs, PCIe 2.0 or 3.0, size 2230 / 2242 / 2260 / 2280 (Note: NOT compatible with M.2 SATA SSDs)
- Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
- Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Simple configuration needed, please refer to tutorial)
- Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
Full Specifications
| Brand | FREENOVE |
|---|---|
| Color | V2 without SSD |
| Model | FNK0098D |
| Warranty | 1 |
| UnitCount | 1 |
| Manufacturer | Freenove |
| ItemPartNumber | FNK0098H |
| Full listing title | Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5 (Without SSD), M.2 HAT Add-on Board, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0/3.0, Max Speed 1231 MB/s |
Ready to buy?
Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5 (Without SSD), M.2 HAT Add-on Board, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0/3.0, Max Speed 1231 MB/s is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Read our analysis
SpecPicks coverage that features this Single-Board Computer.
Related Single-Board Computers
Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5 head-to-head
Side-by-side specs, prices, and a pick for each matchup — no tab-switching.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- Best CPU Cooler for AMD Ryzen Builds in 2026
- First PC Build Guide: Components, Budget & Aesthetics
- Best Parts for a Local LLM Box That Also Runs Jellyfin in 2026
- RTX 3060 12GB vs RTX 4090 for Local LLMs (2026): Is 2x VRAM Worth the Price Jump?
- Best SATA SSD for Retro PC Upgrades in 2026
- Best Gaming Monitor for Console and PC Crossover (2026)
- DualSense vs GameSir G7 SE for PC Gaming in 2026: Which Controller Wins?
- Qwen 3.6 27B at 2x tok/s: Luce DFlash on One RTX 3090
- How to Image and Preserve a Vintage IDE Hard Drive in 2026 (CompactFlash + USB Adapter Workflow)
- Building a Period-Correct 2002 GeForce 4 Ti + Pentium 4 Northwood Win98/XP Dual-Boot
- Aider vs Cline vs Continue.dev on a Local RTX 3060 (2026)
- Best Budget 4K Monitor in 2026: SANSUI vs KOORUI vs ASUS TUF
- M5 vs DGX Spark vs Strix Halo vs RTX 6000: AI Workload Guide
- Using an LLM to Fix Win98 Voodoo & TNT Driver Installs
- Best Filming Kit for a PC Hardware YouTube Channel in 2026
- AMD Ryzen AI Halo vs NVIDIA DGX Spark: Local-AI Mini-Box Showdown
- Best SSD for Steam Deck Storage Expansion (2026)
- Building a 3dfx Voodoo2 SLI Win98 Rig with a CompactFlash Boot Drive
- RetroPie on a Raspberry Pi 4 8GB: The Definitive 2026 Emulation Build
- Aider vs Cline vs Continue.dev for Local Coding on an RTX 3060 (2026)
- ASUS ROG Zephyrus G1 OLED RTX 5070 Drops $575 This Week — Is It the Right Buy?
- Best AM4 CPU to Pair With an RTX 3060 12GB in 2026
- Claude Sonnet 5: What Shipped and What It Means for Local Rigs
- Running a Local LLM on a Raspberry Pi 5 With llama.cpp: Real tok/s on 1B-8B Models
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090