GeeekPi
GeeekPi Metal Case for Raspberry Pi 5
Bottom line: The GeeekPi Metal Case for Raspberry Pi 5 ($22.50 on Amazon as of 2026-10-21 10:13 UTC): Ships with genuine Pi 5 Active Cooler: aluminium heatsink plus PWM fan; main trade-off: raspberry Pi 5 board not included.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Ships with genuine Pi 5 Active Cooler: aluminium heatsink plus PWM fan
- ✓ Supports X1000/X1001/X1003/N04/N05 PCIe HAT boards
- ✓ Full port access: USB-C, micro HDMI, USB, Ethernet, SD, power button
- ✓ 4-lane MIPI DSI/CSI connector cutouts stay usable
Cons
- ✗ Raspberry Pi 5 board not included
- ✗ Fits only Pi 5 4GB/8GB, not Pi 4 or earlier models
- ✗ Metal case can trap heat versus open-frame setups
- ✗ PWM fan adds audible noise under sustained load
Manufacturer description
About this item Compatibility - GeeekPi Raspberry Pi 5 Case with Raspberry Pi 5 Active Cooler is designed for the latest Raspberry Pi 5 4GB/8GB Board.It supports X1000/X1001/X1003/N04/N05 PCIe Peripheral Board. Raspberry Pi 5 Case - It can protect the Raspberry Pi 5 board from damage, dust and scratches. It can access all ports, including usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button, 4-lane MIPI DSI/CSI connectors. Raspberry Pi 5 Active Cooler - Raspberry Pi 5 Active Cooler combines an aluminium heatsink with a PWM fan to keep your Raspberry Pi 5…
SpecPicks Verdict
SpecPicks scored GeeekPi Metal Case for Raspberry Pi 5 using a rating × review-volume × price-fit model applied to published specs and reviews across the single-board computers category. GeeekPi's single-board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for single-board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Compatibility - GeeekPi Raspberry Pi 5 Case with Raspberry Pi 5 Active Cooler is designed for the latest Raspberry Pi 5 4GB/8GB Board.It supports X1000/X1001/X1003/N04/N05 PCIe Peripheral Board.
- Raspberry Pi 5 Case - It can protect the Raspberry Pi 5 board from damage, dust and scratches. It can access all ports, including usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button, 4-lane MIPI DSI/CSI connectors.
- Raspberry Pi 5 Active Cooler - Raspberry Pi 5 Active Cooler combines an aluminium heatsink with a PWM fan to keep your Raspberry Pi 5 maintain optimal operating temperatures, ensuring reliable performance for various applications.
- Package Includes - 1x Metal Case for Raspberry Pi 5, 1x Raspberry Pi 5 Active Cooler, 1x Screwdriver, 1x Screw Pack
- NOTE - Raspberry Pi 5 Board is NOT Included!
- For Pi 5 Case with Cooling Fan&Heatsinks, please refer to ASIN B0CJM52Y4H
Full Specifications
| ASIN | B0CMZ84GM8 |
|---|---|
| Brand | GeeekPi |
| Color | Black |
| Material | Aluminum |
| Case Type | Raspberry Pi |
| Model Name | GeeekPi |
| Manufacturer | GeeekPi |
| Model Number | GeeekPi |
| Built-In Media | Blu-ray |
| Cooling Method | Air |
| Number of Fans | 1 |
| Total Usb Ports | 2 |
| Antenna Location | Business |
| Compatible Devices | Raspberry Pi 5 4GB/8GB Board, X1000/X1001/X1003/N04/N05 PCIe Peripheral Boards |
| Enclosure Material | Aluminum |
| Product Dimensions | 4.13"D x 1.57"W x 2.76"H |
| Total USB 2.0 Ports | 2 |
| Warranty Description | 6 months |
| Hard Disk Form Factor | 3.5 Inches |
| Supported Motherboard | Mini ITX |
| Full listing title | GeeekPi Metal Case for Raspberry Pi 5, with Pi 5 Active Cooler for Raspberry Pi 5 4GB/8GB, Support X1000/X1001/X1003/N04/N05 PCIe Peripheral Board |
Ready to buy?
GeeekPi Metal Case for Raspberry Pi 5, with Pi 5 Active Cooler for Raspberry Pi 5 4GB/8GB, Support X1000/X1001/X1003/N04/N05 PCIe Peripheral Board is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Related Single-Board Computers
GeeekPi Metal Case for Raspberry Pi 5 head-to-head
Side-by-side specs, prices, and a pick for each matchup — no tab-switching.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- OpenAI Says GPT-5.5-Cyber Beats Anthropic's Mythos on Security
- GLM-5.2 vs Claude Opus 4.7: Open-Weights Value on Local GPUs
- Which LLMs Fit a 12GB RTX 3060? Per-Model VRAM Cheat Sheet (2026)
- GLM-5.2 vs DeepSeek V4 on a 12GB RTX 3060: Which Open-Weights Model Wins?
- Build a PiKVM V3 Device for Remote Server Management (2026)
- Best Wired Gaming Headset Under $50 for PC and Console in 2026
- 10 Raspberry Pi Projects Worth Building in 2025
- Best Budget Gaming Headset Under $60: Turtle Beach Recon 50 vs BERIBES vs TAGRY
- Best Retro Mini Console & Handheld in 2026
- Best 8GB GPU for Local LLMs in 2026
- MTP (Multi-Token Prediction): 2x Faster Token Generation on AMD Strix Halo & Radeon 9700 AI Pro
- Running a 26B LLM Locally With No GPU: The CPU Setup Guide
- Ryzen AI Developer Platform: AMD's Debian Linux for AI Devs
- Best Gaming Headset Under $50 for Console + PC (2026)
- Blue Yeti vs HyperX QuadCast 2 S: Best USB Mic for New Streamers
- Ryzen 5 5600G vs Ryzen 7 5700X for a 24/7 LLM Server
- Best SSD for PS4 Pro in 2026: SATA Upgrades That Cut Load Times
- Dual RTX 3090 vs RTX 5090: Gaming vs AI Training
- Raspberry Pi Pico W Becomes a Driverless USB WiFi Adapter
- RTX 3060 12GB vs RTX 3060 Ti 8GB for Local LLMs: VRAM Beats Bandwidth Every Time
- G4-Meromero 31B: Running the Uncensored Gemma 4 Finetune on a 12GB RTX 3060
- Logitech G29 vs HORI vs Thrustmaster: Best Sim Racing Wheel for Beginners
- Sound BlasterX G6 for Retro DOS and Win98 Gaming: Does a Modern USB DAC Fix the EAX Era?
- How to Image a 90s Big-Box CD-ROM to CompactFlash for IDE-Adapter Retro PCs
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090