Skip to main content
ASTARON M.2 SSD Heatsink 2280 Thin Cooler with Nano Thermal Pads 0.5mm-1mm | 9.6mm ultra-thin Silver Heatsink, NVME M2 Thermal Pad Double-Sided Heat Sink for PC/PS5/Gaming Laptops,Wide compatibility
ASTARON

ASTARON M.2 SSD Heatsink 2280 Thin Cooler with Nano Thermal Pads 0.5mm-1mm

Bottom line: The ASTARON M.2 SSD Heatsink 2280 Thin Cooler: Fits M.2 2280 SSDs, single or double-sided, in desktops, PS5, and most gaming laptops; main trade-off: needs 9.6mm of clearance, so slim office laptops are ruled out.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Fits M.2 2280 SSDs, single or double-sided, in desktops, PS5, and most gaming laptops
  • ✓ 9.6mm ultra-thin profile clears tight laptop and PS5 expansion bays
  • ✓ Spring-clip mount avoids rubber bands that soften and loosen over time
  • ✓ Ships with three pads (2x 0.5mm, 1x 1mm), screwdriver, M2 screws, no extra purchase
  • ✓ Anodized aluminum shell with 45-degree angled fins aimed at chassis airflow

Cons

  • ✗ Needs 9.6mm of clearance, so slim office laptops are ruled out
  • ✗ Manufacturer's 10-20C drop claim is untested by third parties
  • ✗ Pad thickness must be matched to your drive by hand, adding install guesswork
  • ✗ Passive only, so results depend on existing case airflow across the fins

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for ASTARON M.2 SSD Heatsink 2280 Thin Cooler, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. On the listing's own facts, the case for it is "Fits M.2 2280 SSDs, single or double-sided, in desktops, PS5, and most gaming laptops"; the main trade-off is "Needs 9.6mm of clearance, so slim office laptops are ruled out". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • ✅【Support Hard Disk】Suitable for all kinds of M.2 2280 SSD (single/double sided can be used) Minimum mounting height requirement: 9.6 mm, suitable for desktop computers/PS5/90% gaming laptops. Not suitable for office laptops
  • ✅【Aluminum Alloy Heatsink】the shell do oxidation treatment, no static troubles. Double-sided clip design, no rubber band softening troubles.
  • ✅【Double Sided Rapid Cooling】 10°C - 20°C cooling effect, the top 45 ° tilt wind guide structure more closely to the chassis air ducts, quickly take away the heat, at the same time, the bottom of the stripe line can also increase the cooling area to extend the life of the hard disk.
  • ✅【Complete Accessories】SSD Cooler x1; 0.5mm Heat Sink x2; 1mm Heat Sink x1; Screwdriver x1; M2 Screws x1
  • 📢【Instructions for use】Can be based on the thickness of the hard disk to paste the silicone sheet, as long as it is put into the heatsink does not loosen. Under normal circumstances: single-sided particles of the hard disk using 1mm silicone sheet, double-sided particles of the hard disk using 0.5mm silicone sheet. If your single-sided particles are thin, you can put one piece ( 1mm+0.5mm) on the top and bottom
  • 📢 If you have any questions about our m.2 2280 nvme heatsinks, please feel free to contact us, our service team will be ready to answer or solve your questions!

Full Specifications

BrandASTARON
ModelH1153ARJYA
Part NumberH1153ARJYA
CompatibilityPC, PS5
Mounting TypeChassis Mount
Number of Items6
Number of Packs1
Included ComponentsSSD Cooler x1; Heat Sink x2; 1mm Heat Sink x1; Screwdriver x1; M2 Screws x1
Cooler Heatsink MaterialAluminum
Cooler Heatsink CompatibilityDesktop computers, PS5, gaming laptops
Full listing titleASTARON M.2 SSD Heatsink 2280 Thin Cooler with Nano Thermal Pads 0.5mm-1mm | 9.6mm ultra-thin Silver Heatsink, NVME M2 Thermal Pad Double-Sided Heat Sink for PC/PS5/Gaming Laptops,Wide compatibility

Benchmark data for other processors

Ready to buy?

ASTARON M.2 SSD Heatsink 2280 Thin Cooler with Nano Thermal Pads 0.5mm-1mm | 9.6mm ultra-thin Silver Heatsink, NVME M2 Thermal Pad Double-Sided Heat Sink for PC/PS5/Gaming Laptops,Wide compatibility is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Retro CPU Coolers & Fans

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →