Frienda 6 Pcs Thermal Pad 120 x 20 Mm
Bottom line: The Frienda 6 Pcs Thermal Pad 120 x 20 Mm: 6 thicknesses: 0.5/1/1.5/2/2.5/3mm cover most GPU/VRAM gaps; main trade-off: 6.0 W/mK trails premium pads (12-17 W/mK) for hot VRAM.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 6 thicknesses: 0.5/1/1.5/2/2.5/3mm cover most GPU/VRAM gaps
- ✓ 6.0 W/mK silicone for faster heat transfer to the heatsink
- ✓ Electrically insulating, no metal particles, safe on traces
- ✓ Wide -40C to 200C range; won't melt under load
- ✓ Cut-to-size for CPU, GPU, VRAM, LEDs, control boards
Cons
- ✗ 6.0 W/mK trails premium pads (12-17 W/mK) for hot VRAM
- ✗ Each pad is small 120x20mm, tight for large GPU coverage
- ✗ Blue silicone, not the softest for uneven clamp pressure
- ✗ No exact thickness matching to your card; trial and error
Manufacturer description
Features:Thermal pads for GPU do not contain metal particles, electrical insulation and no capacitance, very safe to use. High temperature resistance does not melt at -40°C-200°C.1Mm thermal pad is a good helper for heat transfer, 6.0 W/Mk thermal conductivity, fast heat transfer in a short time, and contacted with electrical traces without causing damage.Specifications:Quantity: 6 pcsSize: thickness of 0.5 mm, 1 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mmColor: blueMaterial: thermal siliconePackage includes:6 x Thermal padsWarm notes:Please allow a little error on the size due to manual measurement.The…
SpecPicks Verdict
SpecPicks scored Frienda 6 Pcs Thermal Pad 120 x 20 Mm using a rating × review-volume × price-fit model applied to published specs and reviews across the retro cpu coolers & fans category. Frienda's retro cpu coolers & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Appropriate Size: thermal pads are about 100 x 100 mm, with a thickness of 0.5 mm, 1 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, enough to meet different needs; Total 6 pieces, rich for filling the contact surface gap, practical for beginners and professionals assistant
- Thermal Conductivity: adopting quality thermal silicone material, GPU thermal pad features thermal conductivity is 6.0 watts/thermal conductivity, which have nice performance to well improve the heat transfer between electronic components, and effectively cool down the temperature within seconds
- Safe and Stable: thermal pad CPU is electrical insulation, and will not melt at -40°C-200°C, resist to wear, corrode or irritate, anti static, flame retardant, cushioning, reliable, no bad smell, and does not spoil metal materials
- Convenient to Install: you can choose the most suitable thickness of GPU thermal pad kit and cut it into your required size, this pad is a nice replacement for traditional heat sink compound grease
- Wide Uses: heat sink pad is a satisfying good substitute for traditional heat dissipation composite grease, ideal for control boards, motors, electronics, CPU, GPU, heat sinks, IC LEDs, automotive machinery, computer hosts, notebook computers, DVDs, and other cooling modules
Full Specifications
| Brand | Frienda |
|---|---|
| Full listing title | Frienda 6 Pcs Thermal Pad 120 x 20 Mm, 0.5, 1, 1.5, 2, 2.5, 3 mm | Heat Resistant Conductive Silicone Thermal Pads Conductivity 6.0 W/M for Laptop Heatsink CPU Gpu LED Cooler |
Ready to buy?
Frienda 6 Pcs Thermal Pad 120 x 20 Mm, 0.5, 1, 1.5, 2, 2.5, 3 mm | Heat Resistant Conductive Silicone Thermal Pads Conductivity 6.0 W/M for Laptop Heatsink CPU Gpu LED Cooler is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Load Retro Games onto a Win98 IDE PC with a CompactFlash Adapter (2026)
- Best GPU for Local LLMs Under $350: Why the RTX 3060 12GB Still Wins
- AMD Ryzen AI Halo ($4K) vs a $900 RTX 3060 12GB Local-LLM Build: Buy or Build?
- Is the KOORUI 27" 4K QD-Mini LED Worth It for RTX 3060 Gaming?
- CompactFlash as an IDE Boot Drive for Your Win98 Retro PC in 2026
- Govee vs DAYBETTER vs KSIPZE: Best LED Strip for Desk and Monitor Bias Lighting
- Local 13B LLM Inference on a $700 Used Build: Ryzen 7 3700X + RTX 3060 12GB Benchmarked
- Hands-On: Asus ROG Harpe II Extreme Edition 20 Gaming Mouse
- Ryzen 7 5800X vs 5700X for 1080p High-Refresh Gaming
- Best PC Cooling Fans for High-Airflow Gaming PCs in 2026
- FIDECO vs Unitek: Best IDE-to-USB Adapter for Retro Drive Imaging
- The Pac-Man Benchmark: Testing Local Agentic Coding AI
- Ryzen 7 5800X vs Ryzen 5 5600G for a Budget Local-AI Workstation
- Best Streaming Setup Under $400: G502 + QuadCast 2 S + Cam Link 4K vs the Bundle Alternatives
- Best Budget GPU for Local LLM Inference in 2026
- AI-Driven Driver Install on Win98 + WinXP: Vision-LLM Walks the Installer (Field Report)
- Ryzen 5 5600G vs RTX 3060 12GB for Entry Local LLM Inference (2026)
- Best AM4 CPU for Budget Gaming and Local AI in 2026
- How Creative Killed Aureal: The 1999 Patent War, Audigy's Lineage, and Why Consumer PC Audio Stagnated for…
- AI Bug-Hunting Surged: Running a Local Security-Scanner LLM on 12GB VRAM
- Logitech G502 Hero vs SteelSeries QcK: Building a Competitive FPS Loadout in 2026
- Retro Console Modding Services: What to Expect in 2026
- A 3D-Printed Switch Steering Wheel V2 Brings Adaptive Racing to More Players
- Best Single-Board Computers for Home Lab in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090