Tcenofoxy Mini-Fit Jr 4.2 Pre-Crimped Cable Compatible with Molex 4.2mm
Bottom line: Per its Amazon listing, the Mini-Fit Jr 4.2 Pre-Crimped Cable Compatible with Molex 4.2mm: high-quality PVC insulated cable with 20AWG core, rated for 300V and 80°C; offer 25cm and 50cm wires.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 【Versatile for Many Applications】Widely used in electronics DIY and engineering projects.
- ✓ Backed by Tcenofoxy's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Make wiring easier with our complete Pre-crimped Cable Wire Kit!1】This all-in-one solution includes pre-crimped PVC cables, available in two lengths: 25cm and 50cm. Each wire is already terminated with crimp pins, allowing for quick installation without additional crimping tools. The cables offer both durability and safety for your electronics projects.2】The product comes with different wire colors, making circuit identification easy and organized. Also included are connector housings in different variations, ensuring compatibility with a wide range of applications.3】Whether you're a…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Mini-Fit Jr 4.2 Pre-Crimped Cable Compatible with Molex 4.2mm, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies & cables category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【Pre-crimped for Plug & Play】No crimping tools needed! Each wire is pre-crimped with terminals compatible with Molex type, ready to use—saving time and ensuring stable connections.
- 【Rich Color & Connector Variety】10 vivid wire colors (2 pieces per color) total 20pcs wire, plus 6 connector types from 1P to 6P (2pcs per type) total 12pcs, easily identify and organize circuits.
- 【Durable UL1007 20AWG Wire】High-quality PVC insulated cable with 20AWG core, rated for 300V and 80°C. Strong, flexible, and safe for electronics, DIY, and prototyping.
- 【Two Length Options Included】Offer 25cm and 50cm wires, providing flexibility for various wiring needs—short or long connections.
- 【Versatile for Many Applications】Widely used in electronics DIY and engineering projects.
Full Specifications
| Brand | Tcenofoxy |
|---|---|
| Color | 2 Row-Female |
| Model | TC-MX-4.2-10Co-20#-Du-MM-1-6P-50cm |
| Unit Count | 32 Count |
| Item Length | 50 centimeters |
| Part Number | TC-MX-4.2-10Co-20#-Du-MM-1-6P-50cm |
| Connector Type | Molex, 1/2/3/4/5/6pin |
| Maximum Current | 7 A |
| Maximum Voltage | 300 volts_of_direct_current |
| Special Feature | Pre-crimped |
| Connector Gender | Male-to-Male |
| Specification Met | UL |
| Indoor Outdoor Usage | Indoor |
| Recommended Uses For Product | Connecting electronic devices, electronics DIY projects, extending signal transmission range |
| Other Special Features of the Product | Pre-crimped |
| Full listing title | Mini-Fit Jr 4.2 Pre-Crimped Cable Compatible with Molex 4.2mm, 20AWG UL1007 PVC Cable 10 Colors, 50cm with Dual Row 1/2/3/4/5/6Pin Connector (TC-MX4.2-D-MM-50cm) |
Ready to buy?
Mini-Fit Jr 4.2 Pre-Crimped Cable Compatible with Molex 4.2mm, 20AWG UL1007 PVC Cable 10 Colors, 50cm with Dual Row 1/2/3/4/5/6Pin Connector (TC-MX4.2-D-MM-50cm) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- RTX 3060 12GB vs GTX 1050 Ti: What a 4GB Card Runs in 2026
- PiKVM Hardware Guide 2026: Boards, Kits & Storage
- Best AMD CPU for Gaming in 2026: Our Top 5 Ryzen Picks
- Real Productivity on 32-64GB RAM for Local LLMs
- Best 8GB GPU for Local LLMs in 2026
- Ryzen 5 5600X vs Ryzen 5 5600G for CPU-Only Gemma 3 12B
- Building a 2001 Pentium III + GeForce 3 Win98SE Gaming Rig: A 2026 Build Log
- Best Budget Gaming Monitors Under $300 for 1080p in 2026
- Best Mouse Pads for Competitive FPS Gaming in 2026
- Best Raspberry Pi Alternatives 2026: 5 SBCs After the Price Hikes
- Best CPU Coolers for Ryzen and Intel Builds in 2026
- Ryzen AI Max+ 395 LLM Performance: What to Expect
- How to Image a Vintage IDE Hard Drive in 2026 With a USB Adapter
- How to run Qwen 3 14B on NVIDIA GeForce RTX 4090
- Ryzen 7 9800X3D Hits Record-Low Price — and the 5800X Value Case
- Raspberry Pi 4 8GB vs Pi 5 vs Mini-PC for Local LLMs
- Best Streaming Gear for Starting a Channel in 2026
- That Game Boy Clone Runs Too Fast — and the Fix Is a Clock Crystal
- Local 13B LLM Inference on a $700 Used Build: Ryzen 7 3700X + RTX 3060 12GB Benchmarked
- Adafruit Reverse-Engineers the Creative Katana V2X Soundbar
- Best 1440p Monitor for the RTX 3060 12GB (2026)
- Started a Homelab a Month Ago: Am I Doing It Right?
- Framework RTX 5070 12GB Module: Why It's $1,199, Not $699
- GLM-5.2 vs DeepSeek V4 on a 12GB RTX 3060: Which Open-Weights Model Wins?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090