Auotac ARGB PWM Fan Hub with RF Remote Controller for PC Build
Bottom line: The Auotac ARGB PWM Fan Hub with RF Remote Controller for PC Build: Drives up to 10 case fans from one hub, enough for a full tower build; main trade-off: needs two free SATA power leads, awkward on small or modular PSUs.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Drives up to 10 case fans from one hub, enough for a full tower build
- ✓ Handles both 5V 3-pin ARGB and 12V 4-pin PWM connectors on the same board
- ✓ Dual SATA power inputs keep voltage stable with all ten channels loaded
- ✓ Magnetic base sticks straight to the case, no screws or double-sided tape
- ✓ RF remote adjusts fan speed and ARGB lighting without opening the case
Cons
- ✗ Needs two free SATA power leads, awkward on small or modular PSUs
- ✗ Vendor claims like 200 percent safer are unquantified marketing language
- ✗ Magnetic mount needs bare steel, so painted or aluminum panels may not hold
- ✗ No listed cable lengths, so hub placement in large cases is a guess
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Auotac ARGB PWM Fan Hub with RF Remote Controller for PC Build, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. On the listing's own facts, the case for it is "Drives up to 10 case fans from one hub, enough for a full tower build"; the main trade-off is "Needs two free SATA power leads, awkward on small or modular PSUs". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- This fan hub supports connecting up to 10 groups of case ARGB fans.
- Built-in strong magnetic, easily attaches to PC case via magnetic suction.
- Supports fan speed reading and PWM speed adjustment, enables sync & control of ARGB lighting. Easily adjust fan speed and lights via remote control.
- Dual SATA power connectors for stable input under full load, 100% meeting the power supply needs of multiple devices.
- 10-channel dual-circuit protection device with surge protection, supporting hot swapping, and safety performance increased by 200%.
- Package includes 1x controller, 1x remote control, 1x dual SATA power cable, 1x motherboard sync cable, and 1x PWM temperature control signal cable.
Full Specifications
| Brand | Auotac |
|---|---|
| Color | Black |
| Model | HK02 |
| Voltage | 12 volts |
| Material | Plastic |
| Unit Count | 10 Count |
| Display Type | LED |
| Compatibility | PC |
| Material Type | Plastic |
| Included Components | Fan Hub, RF Remote, Dual SATA Power Cable, PWM Sync Cable, ARGB Sync Cable |
| Item Dimensions L x W x H | 3.95"L x 2.25"W x 0.65"H |
| Full listing title | ARGB PWM Fan Hub with RF Remote Controller for PC Build, (Connect Ten Case Fans, 5V 3Pin ARGB & 12V 4Pin PWM Fan Connector, Stable Dual SATA Power Input, Magnetic Suction), Black |
Ready to buy?
ARGB PWM Fan Hub with RF Remote Controller for PC Build, (Connect Ten Case Fans, 5V 3Pin ARGB & 12V 4Pin PWM Fan Connector, Stable Dual SATA Power Input, Magnetic Suction), Black is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Two GTX 1050 Ti 4GB vs One RTX 3060 12GB for 8B Local LLMs
- Self-Hosting Jellyfin on a Ryzen 5 5600G: 4K Transcode on the Cheap
- North Mini Code: The New Small Coding Model and the Hardware That Runs It
- Intel Arc Pro B60 Gaming Performance: 2025 Benchmarks
- AI-Assisted Voodoo Driver Surgery on Windows 98
- Best Controller for PC Emulation in 2026: Pro 2 vs DualSense
- WoW Mythic+ 3500 on Steam Deck: Is It Possible?
- Fish Audio S2.1 Pro vs Local TTS on an RTX 3060
- M5 vs DGX Spark vs Strix Halo vs RTX 6000: AI Workload Guide
- Best PC and Emulation Controllers in 2026
- DualSense vs 8BitDo Pro 2 vs GameSir G7 SE: Best PC Controller in 2026
- RTX 3060 12GB vs Arc B580 12GB for Local LLMs in 2026
- Steam Deck OLED vs ROG Xbox Ally X: 2026 Comparison
- MTP Decoding on RTX 3060 12GB: When Multi-Token Prediction Helps (and Hurts)
- Rescue Dying Vintage IDE & SATA Drives with a USB Adapter Before They Fail
- Linux 7.3: 'Flatten the Pick' Scheduler Gains for Gaming
- Jellyfin on a Raspberry Pi 4 8GB: What It Can and Can't Transcode
- Step 3.7 Flash vs Gemma 4 12B: Which Local Model Wins on a 12GB GPU?
- Build a Private Security Camera on a Raspberry Pi (Ring Alternative) in 2026
- Govee vs DAYBETTER vs KSIPZE: Best LED Strip for Desk and Monitor Bias Lighting
- Benchmarking Open Models for Agentic Tool Use on an RTX 3060
- Set Up a Local LLM Coding Assistant in VS Code on an RTX 3060 12GB (2026)
- Anthropic Launches Claude Science for Researchers
- CompactFlash as a Silent IDE Boot Drive: A 1998-Era Build Log
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090