BILIONE Microphone Stand Floor
Bottom line: The BILIONE Microphone Stand Floor: Height adjusts from 45 to 75 inches, so people over 6 feet tall can use it; main trade-off: floor-standing only, with no desk clamp option for desktop setups.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Height adjusts from 45 to 75 inches, so people over 6 feet tall can use it
- ✓ 5.2lb weighted square base with EVA pads grips the floor and protects surfaces
- ✓ Comes with 2 clips plus a 3/8 to 5/8 inch thread adapter for most mic mounts
- ✓ Listing says it fits Blue Yeti, HyperX QuadCast, AT2020 and Shure SM7B
- ✓ Breaks down in under 20 seconds for mobile podcast setups
Cons
- ✗ Floor-standing only, with no desk clamp option for desktop setups
- ✗ Compact base needs care with heavy mics at full boom extension
- ✗ Mic clip swivels 180 degrees, not a full 360-degree rotation
- ✗ No shock mount included, so floor and handling noise can reach the mic
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for BILIONE Microphone Stand Floor, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the streaming gear category before committing. On the listing's own facts, the case for it is "Height adjusts from 45 to 75 inches, so people over 6 feet tall can use it"; the main trade-off is "Floor-standing only, with no desk clamp option for desktop setups". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, load rating and mounting or device compatibility in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Heavy-Duty Studio Mic Stand: Engineered with a 1.5mm steel arm and 25mm reinforced rod for maximum stability. This microphone boom stand securely holds heavy broadcasting mics with minimal wobble.
- Precise Podcast Mic Stand Adjustment: Easily adjust height from 45" to 75" with a smooth clutch knob, individuals over 6 feet tall can also use it. The 180° swivel microphone clip ensures perfect positioning for any recording scenario.
- Space-Saving Mic Stand Floor Base: The 5.2lb weighted base with EVA pads provides firm grip and floor protection. Its compact square design saves space and prevents tripping hazards.
- Universal Microphone Holder System: using dual-thread clips and 3/8“-5/8” adapter, compatible with models like Blue Yeti, HyperX QuadCast, Audio-Technica AT2020, Shure SM7B, and more. Complete with cable management for a tidy studio mic stand setup.
- Portable Quick-Detach Mic Stand: Breaks down into portable parts in under 20 seconds, ideal for mobile podcast mic stand setups. Includes essential 3/8" to 5/8" mic stand adapter for easy transport to any gig.
Full Specifications
| Brand | BILIONE |
|---|---|
| Color | Black |
| Style | Mic Stand Floor |
| Weight | 5.2lb |
| Material | Metal |
| Base Type | Flat |
| Unit Count | 1.0 Count |
| Model Number | MS180 |
| Material Type | Metal |
| Product Style | Mic Stand Floor |
| Maximum Height | 70 Inches |
| Body Material Type | Metal |
| Included Components | Dual Mic Clips, 3/8" to 5/8" Adapter, Cable Management |
| Warranty Description | 60 days free return. |
| Manufacturer Part Number | MS180 |
| Mount thread size (inches) | 3/8“ or 5/8" Inches |
| Microphone Stand Thread Size | 3/8 inch, 5/8 Inch |
| Space-Saving Mic Stand Floor Base | The 5.2lb weighted base with EVA pads provides firm grip and floor protection. Its compact square design saves space and prevents tripping hazards. |
| Full listing title | BILIONE Microphone Stand Floor, 45''-75'' Height Adjustable Boom Mic Stand with Weighted Base, 2 Clips & 3/8'' to 5/8'' Adapter Compatible with Blue Yeti HyperX QuadCast Shure SM58 |
Ready to buy?
BILIONE Microphone Stand Floor, 45''-75'' Height Adjustable Boom Mic Stand with Weighted Base, 2 Clips & 3/8'' to 5/8'' Adapter Compatible with Blue Yeti HyperX QuadCast Shure SM58 is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Streaming Gear
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- Transcend CF133 CompactFlash as a Retro PC Boot Drive: Setup + Gotchas
- Raspberry Pi vs AMD GPUs for Local LLMs: What the Specs Show
- Best Streaming Starter Kit for Creators in 2026
- Raspberry Pi AI Kit 2025: Specs, Uses, and Limits
- GLM-5.2 on an RTX 3060 12GB: Can the New Open-Weights Leader Run Local?
- Air vs AIO for the Ryzen 7 5800X: Noctua NH-U12S vs CoolerMaster ML240L
- Ryzen 7 5800X vs 5700X for Gaming: Is the $60 Gap Worth It?
- GPU & CPU Upgrade ROI: Cost-per-FPS Calculator Guide
- Build a Raspberry Pi 4 8GB NAS with SATA SSDs in 2026
- Gemma 4 31B Heretic Finetune: Can It Run on a 12GB RTX 3060?
- Best Controller for PC Emulation and Retro Gaming in 2026
- Add Wireless Controllers and More Games to Your SNES Classic & Genesis Mini in 2026
- Xbox Mode's PC Performance Boost Favors Nvidia GPUs
- Using Claude to Auto-Generate Period-Correct DOSBox-X Configs for 90s PC Games
- Building a Period-Correct 2003 LAN Party Rig with Athlon XP and Audigy 2 ZS
- Kimi K3 Nears GPT-5.6 at Half the Cost — And What It Means for Home Rigs
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5080
- Local LLM in VSCode: The 2026 Setup Guide
- Raspberry Pi 4 8GB vs Zero 2W for an AI Camera (2026)
- Intel llm-scaler-vLLM 1.4 with Arc Pro B70: Local Inference vs RTX 3060 12GB
- Kingston A400 960GB vs Crucial BX500 1TB for a PS4 Pro SSD Upgrade
- oQ vs Q4_K/Q6_K vs MXFP4 vs UD-MLX: Which Quantization Format Should You Pick in 2026?
- Best GPU for 1440p Local Image Generation in 2026: Why the RTX 3060 12GB Still Wins on Value
- NVMe vs SATA SSD for a 2026 Gaming PC: WD_BLACK SN770 vs the Value SATA Trio
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090