GLOTRENDS
GLOTRENDS 100mm PCIe 5.0 Riser Cable for RTX5090 RTX4090 RX9070 RX7900
Bottom line: The GLOTRENDS 100mm PCIe 5.0 Riser Cable for RTX5090 RTX4090 RX9070 RX7900 ($47.99 on Amazon as of 2026-11-07 23:13 UTC): Full PCIe 5.0 x16 bandwidth up to 64GB/s with compatible hardware; main trade-off: needs Intel 13th Gen/Ryzen 8700+ and RTX 50/RX 9000 for 5.0.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Full PCIe 5.0 x16 bandwidth up to 64GB/s with compatible hardware
- ✓ 90-degree right-angle end for clean vertical GPU mounting
- ✓ EMI shielding: foil-wrapped, double-grounded differential pairs
- ✓ 30AWG silver-plated copper for stronger signal integrity
- ✓ Adjustable screws 97-128mm fit 98/108/121/125mm brackets
Cons
- ✗ Needs Intel 13th Gen/Ryzen 8700+ and RTX 50/RX 9000 for 5.0
- ✗ Requires a Z790 or newer motherboard for full speed
- ✗ Hot swapping is not supported
- ✗ Short 100mm length limits routing in larger cases
SpecPicks Verdict
SpecPicks scored GLOTRENDS 100mm PCIe 5.0 Riser Cable for RTX5090 RTX4090 RX9070 RX7900 using a rating × review-volume × price-fit model applied to published specs and reviews across the graphics cards category. GLOTRENDS's graphics cards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for graphics cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- PCIE 5.0 x16 Riser Cable – Unleash 64GB/s Peak Speed: To achieve full PCIE 5.0 x16 bandwidth (64GB/s) with compatible hardware. No driver installation required (hot swapping not supported).
- 1) CPUs: Intel 13th Gen and above or AMD Ryzen 8700 and above; 2) GPUs: GeForce RTX 50 Series or AMD Radeon RX 9000 Series;
- 3) Motherboards: Z790 and newer models; 4) Memory: 32GB dual-channel RAM (DDR5 6000Hz+ recommended) 5) Lane: Direct CPU-connected PCIE 5.0 x16 slot for optimal performance.
- Enhanced Signal Integrity with Advanced EMI Shielding: Each differential signal pair is double grounded and individually foil-wrapped, minimizing interference. Constructed with 30AWG silver-plated copper for superior conductivity.
- Robust 78W Power Delivery: 40-pin connector with 10 pins dedicated to 12V (up to 78W) and 6 pins for 3.3V, ensuring stable power supply under heavy loads.
- Installation: Adjustable screw hole distance: 97-128 mm (compatible with common 98/108/121/125 mm sizes).
Full Specifications
| Brand | GLOTRENDS |
|---|---|
| Color | White |
| Model | B0FLWHSGT7 |
| 1) CPUs | Intel 13th Gen and above or AMD Ryzen 8700 and above; 2) GPUs: GeForce RTX 50 Series or AMD Radeon RX 9000 Series; |
| Frequency | 16000000000 hertz |
| Cable Type | PCIE 5.0 X16 Riser Cable |
| Unit Count | 1 Count |
| Part Number | PCIE50-X16-100mm-0090D |
| Installation | Adjustable screw hole distance: 97-128 mm (compatible with common 98/108/121/125 mm sizes). |
| Connector Type | Female: 90 Degree Right Angle, Male: 0 Degree Angle |
| Number of Pins | 40 |
| Number of Items | 1 |
| Special Feature | 100mm Length, 0-90 Degree Conversion, White Color |
| Connector Gender | Male-to-Female |
| Compatible Devices | AMD Radeon RX9000/RX7000 Series, GeForce RTX 50/RTX 40 Series |
| Data Transfer Rate | 64 gigabytes_per_second |
| Included Components | 100mm PCIE 5.0 X16 Riser Cable |
| Indoor Outdoor Usage | Indoor |
| Protective Packaging | Shipped in anti-static bags. Do not touch gold fingers—fingerprints or contaminants may reduce signal quality. |
| Compatible Phone Models | No Compatible Phone Models |
| Full listing title | GLOTRENDS 100mm PCIe 5.0 Riser Cable for RTX5090 RTX4090 RX9070 RX7900, Compatible with PCIe 5.0/4.0 GPUs, 90 Degree Right Angle for Vertical GPU Mount |
Benchmark data for other graphics cards
Ready to buy?
GLOTRENDS 100mm PCIe 5.0 Riser Cable for RTX5090 RTX4090 RX9070 RX7900, Compatible with PCIe 5.0/4.0 GPUs, 90 Degree Right Angle for Vertical GPU Mount is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-07. Price and availability subject to change.
Related Graphics Cards
GLOTRENDS 100mm PCIe 5.0 Riser Cable for RTX5090… head-to-head
Side-by-side specs, prices, and a pick for each matchup — no tab-switching.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Qwen3 4B on Raspberry Pi 4 8GB vs Ryzen 5 5600G: Which Cheap Always-On Box Wins?
- AMD Ryzen 9 9950X3D2 Runs Faster on Linux Than Windows 11
- Best GPU for i7-13700K at 1440p 180Hz (GTX 1080 Upgrade)
- VRAM calculator: what can you actually run on your GPU?
- Heterogeneous GPU Weighting and Layer Splitting: Mixed-GPU LLM Inference on Consumer Hardware
- Raspberry Pi AI HAT+ 2025: TOPS, Price, Setup Guide
- Ryzen 7 9800X3D vs Ryzen 9 9900X3D: Which Zen 5 X3D Chip Wins in 2026?
- Ex-Sega Engineer Builds a 'Super-Realistic' CRT Emulator
- Sound BlasterX G6 on a Retro PC: Bringing Modern DAC Quality to Pentium III and Athlon XP Builds
- Debugging Vintage Windows with Claude: SYSFIX Patterns for Win98 vcache, MSNP32, and Glide Hangs
- Build a Plex Media Server on a Raspberry Pi 4 8GB in 2026
- IPEX-LLM + Ollama in Docker on Intel Arc: The 2026 Setup Guide
- The Adder at the Heart of Intel's 8087 Math Coprocessor
- vLLM 0.21 Adds Intel GPU Support: What It Means for Budget AI Rigs
- Build a Jellyfin Media Server on a Raspberry Pi 4 in 2026
- Retro Game Emulator Online: Top Browser-Based Picks for 2026
- LG UltraGear 52G930B 52-Inch 5K Gaming Monitor Review
- Handheld Gaming PC Near Me: Where to Buy in 2025
- Raspberry Pi 4 8GB vs a Used Mini PC for a 2026 Beginner Homelab
- AMD Ryzen AI Halo: Pre-Orders Open for Linux Developers
- Noctua NH-U12S vs DeepCool AK620: Best Air Cooler for an Overclocked Ryzen
- Run a Local LLM on a Raspberry Pi 4 8GB: What Works in 2026
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- After the Claude Code Malware Scare: Build an Isolated Local Agent Rig
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090