ELFJMZP ARGB LED Controller 5V 3-Pin
Bottom line: Per its Amazon listing, the ELFJMZP ARGB LED Controller 5V 3-Pin ($7.19 on Amazon as of 2026-11-21 17:15 UTC): just plug the USB-powered 5V 3-Pin ARGB controller into any USB-A header; input voltage: 5V Safe operating current: 0.8A.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ Just plug the USB-powered 5V 3-Pin ARGB controller into any USB-A header
- ✓ Input voltage: 5V Safe operating current: 0.8A
- ✓ Backed by ELFJMZP's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for ELFJMZP ARGB LED Controller 5V 3-Pin, so this read rests on the manufacturer's listed specs and the current price in the rgb & lighting category (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 1.[Plug & Play USB Power] Forget SATA ports! Just plug the USB-powered 5V 3-Pin ARGB controller into any USB-A header, power bank, or wall adapter and light up your rig instantly—perfect for motherboard-free ARGB control. Input voltage: 5V Safe operating current: 0.8A, power: 5W Maximum operating current: 2A, power: 10W
- Note: This product is not compatible with the ARGB ports built into PC motherboards! This product is a standalone ARGB LED driver powered by USB-A, specifically designed to provide the necessary ARGB LED driver for PC motherboards that lack ARGB ports.
- 2.[70 cm Total Reach] With a 70 cm integrated cable (USB + ARGB out), this mini RGB controller tucks behind the motherboard tray yet still reaches top or front fans, giving you clean cable management without extensions.
- 3.[3-Button Light Show] Tap M (Mode) → S (Speed) → C (Color) to cycle through 300+ vivid effects, slow breathing, rainbow waves, or static hues—no software required.
- 4.[Universal 3-Pin ARGB Compatibility] Works flawlessly with Aura Sync, Mystic Light, RGB Fusion, and any 5V 3-pin ARGB fans, strips, or water blocks. One controller, endless combos.
- 5.[Pocket-sized powerful controller] Measuring just 1.8 × 0.9 × 0.4 inches, this compact ARGB controller can be placed anywhere—secure it with tape or let it float—to enjoy cool RGB lighting effects on a budget.
Full Specifications
| Brand | ELFJMZP |
|---|---|
| Model | USB-ARGB001 |
| Cable Type | 24awg |
| Unit Count | 1 Count |
| Item Length | 70 centimeters |
| Part Number | EP000074 |
| Connectivity | USB |
| Compatibility | PC |
| Connector Type | 2.54-4p-3pin, Usb 2.0 |
| Number of Pins | 3 |
| Maximum Current | 2 A |
| Maximum Voltage | 5 volts |
| Number of Items | 1 |
| Special Feature | 5V 3-pin ARGB USB controller, ARGB controller without motherboard, ARGB mini controller with three buttons |
| Connector Gender | 2.54-4P-3PIN Male, USB Male |
| Compatible Devices | ARGB FAN, ARGB Light Strip, ARGB Water Cooling Radiator |
| Data Transfer Rate | 480 megabits_per_second |
| Included Components | NO |
| Indoor Outdoor Usage | Indoor |
| Compatible Phone Models | No Compatible Phone Models |
| Full listing title | ARGB LED Controller 5V 3-Pin – 70 cm Total Length USB Powered Mini RGB Controller with (M-Mode) (S-Speed) (C-Color) Buttons Plug-&-Play for PC Fans & Light Strips |
Ready to buy?
ARGB LED Controller 5V 3-Pin – 70 cm Total Length USB Powered Mini RGB Controller with (M-Mode) (S-Speed) (C-Color) Buttons Plug-&-Play for PC Fans & Light Strips is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- RTX 3060 12GB Showdown: ZOTAC Twin Edge vs MSI Ventus 2X (2026)
- Self-Hosting Jellyfin on a Raspberry Pi 4 8GB: What It Can Really Do
- Best SteamOS Handheld Gaming PCs in 2025: What to Buy
- Linux Gaming Keeps Getting Faster: Windows APIs Land in the Kernel
- Logitech G920 vs Thrustmaster: Best Beginner Sim Racing Setup 2026
- ComfyUI on an RTX 3060 12GB: Local Stable Diffusion Setup and Real Throughput
- Cosmos3-Super on an RTX 3060 12GB: Can the #1 Open-Weights Image Model Run Local?
- Home Assistant on a Raspberry Pi 4 8GB in 2026: SSD Boot, Power Draw, Performance
- Turtle Beach Recon 50 vs BERIBES: Best Budget Gaming Headset Under $40?
- Best Raspberry Pi Projects for College Students in 2026: 8 Builds on a Pi 4 8GB
- Voodoo5 5500 PCI Boots on Modern ASUS P8Z77-V Pro — A Look at Retro GPUs in 2026 Boards
- Best Budget Gaming Laptops of 2026: Buyer's Guide
- RTX 5090 vs RTX A6000 for Local LLMs: Speed (5090) or Capacity (A6000)?
- Claude Now Writes 65% of Anthropic's Code: The Local Coding-Rig Angle
- RTX 3090 vs RTX 4090 for LLM Inference: Same 24GB (2026)
- Build a Pi Zero 2 W Retro Mini-TV: Full Parts List and Setup
- Best Streaming Gear for New Creators in 2026
- Can a 12GB RTX 3060 Still Run 2026's Local LLMs?
- Intel Bartlett Lake vs i9-13900K: More Cores, Fewer Frames
- Crucial BX500 vs Samsung 870 EVO vs WD Blue: Best Budget SATA SSD for Your Game Library (2026)
- Claude Fable 5 Burns 117k Tokens/Task: Can a Local RTX 3060 Keep Up?
- Best NVMe SSD for Local LLM Model Storage in 2026
- Ryzen 7 5800X vs 5700X for Gaming and Streaming: Which AM4 Chip Wins in 2026?
- A 180Hz 1440p Gaming Monitor at Entry-Level Pricing — How It Stacks Against Our 4K Picks
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090