Amazon Renewed Aiper Scuba S1 Robotic Pool Cleaner
Bottom line: The Amazon Renewed Aiper Scuba S1 Robotic Pool Cleaner: 4500GPH suction lifts leaves, silt and ultra-fine debris in a single pass; main trade-off: renewed unit, not new - expect cosmetic wear and refurbished-grade coverage.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 4500GPH suction lifts leaves, silt and ultra-fine debris in a single pass
- ✓ Four modes - Auto, Wall, Waterline, Eco - cover deep cleans and light upkeep
- ✓ Wall-climbing traction plus high-density brushes scrub floor, walls and waterline
- ✓ 150 minutes of runtime and 1,600 sq ft coverage suit medium to large inground pools
- ✓ Eco mode runs a 45-minute clean every 48 hours for lower energy draw
Cons
- ✗ Renewed unit, not new - expect cosmetic wear and refurbished-grade coverage
- ✗ Coverage tops out at 1,600 sq ft, so larger pools need a second cycle
- ✗ 150-minute max runtime forces a recharge before back-to-back sessions
- ✗ Listing confirms no app control or scheduling beyond Eco mode's 48-hour cycle
SpecPicks Verdict
SpecPicks scored Amazon Renewed Aiper Scuba S1 Robotic Pool Cleaner using a rating × review-volume × price-fit model applied to published specs and reviews across the retro consoles category. Amazon Renewed's retro consoles lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro consoles of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Powerful 4500GPH Suction: Engineered with a commanding 4500GPH suction flow, Scuba S1 robotic pool cleaner removes leaves, silt, and ultra-fine debris in one efficient pass. Ideal for rapid deep cleaning, keeping your pool consistently clean and inviting
- Four Cleaning Modes: Switch between Auto, Wall, Waterline, and Eco Mode to tackle any cleaning task. Whether you need full-coverage deep cleaning or light daily upkeep, this pool cleaner for inground pools adapts instantly—delivering the ideal clean every time
- Eco-Friendly Cleaning: In Eco mode, Scuba S1 pool cleaner performs a 45-minute light cleaning every 48 hours, using less energy while keeping water crystal clear. With up to 150 minutes runtime and a 1,600 sq. ft. coverage, it’s ideal for medium to large inground pools
- Smart Wavepath Navigation 2.0: With enhanced Smart Wavepath Navigation 2.0, this pool vacuum robot scans your pool layout and charts the most efficient path forward. By reducing overlap and maximizing movement efficiency, it delivers full-pool cleaning in less time
- Wall & Waterline Cleaning: Combining powerful wall-climbing traction with an upgraded high-density brushing system, this robot pool cleaner delivers a full-surface clean—scrubbing and vacuuming the pool floor, walls, and waterline with maximum efficiency
Full Specifications
| Brand | AIPER |
|---|---|
| Color | Obsidian |
| Capacity | 3.5 liters |
| Material | Plastic, Rubber |
| Model Name | Scuba S1-RV |
| Model Year | 2024 |
| Unit Count | 1 Count |
| Model Number | Scuba S1-RV |
| Power Source | Battery Powered |
| Compatibility | Switch |
| Load Capacity | 5 pounds |
| Material Type | Plastic, Rubber |
| Warranty Type | Limited |
| Battery Weight | 735 g |
| Control Method | Touch |
| Installation Type | robotic |
| Battery Description | Lithium-Ion |
| Number of Batteries | 1 Nonstandard Battery batteries required. (included) |
| Manufacturer Part Number | Scuba S1-RV |
| Item Dimensions L x W x H | 15.3"L x 8.7"W x 17.5"H |
| Full listing title | Aiper Scuba S1 Robotic Pool Cleaner, Wall & Waterline Cleaning, Cordless Pool Robot with 4 Modes, Smarter Navigation with High-Precision Sensors(Renewed) |
Ready to buy?
Aiper Scuba S1 Robotic Pool Cleaner, Wall & Waterline Cleaning, Cordless Pool Robot with 4 Modes, Smarter Navigation with High-Precision Sensors(Renewed) is vintage hardware; the used and vintage market on eBay carries most of the live inventory. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. It also has an Amazon listing — check it for current price and availability. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Self-Host Immich on a Ryzen 5 5600G Mini-PC: Power, Storage, Real Throughput
- HiDream-O1 1.5 Lands #3 in Text-to-Image: Can You Run It Locally on a 12GB GPU?
- Ryzen 7 5800X vs Ryzen 5 5600G for 1080p Gaming: Which Wins?
- AI-Driven Driver Install on Win98: Using a Vision LLM to Recover a Voodoo3 PCI Card
- Old RAM Identification: Decode Part Numbers & Specs
- Samsung's 256GB microSD Drops to $47.99 — and What It Means for Cheap Storage
- 32GB of DDR5 Drops to $240 in New Newegg Build Bundles
- RTX 3060 12GB: Ollama vs llama.cpp vs vLLM Token Speed (2026)
- Best Streaming Starter Kits in 2026: Mic, Light, Capture, and the One-Box Builds
- RetroArch PS2 Emulation: Setup, BIOS & Performance Guide
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5080
- Best GPU for gpt-oss 20B in 2026
- Motherboard Sales Fell 33% in 2026: Is DIY PC Building Dying?
- Ryzen 5 2600 vs Ryzen 9 3900X: Do 12 Cores Buy CPU-Only 8B Inference?
- Asus Prime Z890-P WiFi Review: Built for Core Ultra 200S
- ComfyUI on an RTX 3060 12GB: What Image Models Actually Run Well
- GameSir G7 SE vs DualSense for PC Gaming: Which Controller Wins?
- Samsung 870 EVO vs Crucial BX500: Best Budget SATA SSD for a 2026 Build
- Best $1000 Prime Day Gaming PC: RTX 5060 Ti + 32GB RAM
- Best Gaming Monitor for Console and PC Crossover (2026)
- Best Local LLM You Can Run on 12GB of VRAM in 2026
- OpenAI and Anthropic Are Giving Startups Free Compute — Here's the Local Rig That Replaces It
- Best 2.5" SATA SSD to Upgrade a PS4 Pro in 2026
- Retro Nintendo Switch 2 Dock Channels the N64 and Holds Six Game Cards
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090