GOMING 24V 32.8ft WS2811 RGB Neon COB LED Strip Addressable IP67 Waterproof
Bottom line: Per its Amazon listing, the GOMING 24V 32.8ft WS2811 RGB Neon COB LED Strip Addressable IP67: driven by 24V power supply.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Driven by 24V power supply
- ✓ Backed by GOMING's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for GOMING 24V 32.8ft WS2811 RGB Neon COB LED Strip Addressable IP67…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【Dream Color】 WS2811 led strip can show Flowing water, chasing light, trailing, jumping, raindrops, and so on hundreds of lighting effect (Controller and power supply are necessary, but do not include controller and 24V power supply)
- 【IP67 Waterproof】Neon COB LED strips have an IP67 waterproof rating and they can be safely used indoors and outdoors, such as bathrooms, kitchens, windows, building facades, courtyards, etc.
- 【Cuttable】The neon COB LED strip can be cut along the line on the back. After cutting, make sure that all connections are watertight sealed with silicone glue.
- 【Easy to Install】The light strip has adhesive backing on the back, which makes it easy to stick on a clean, dry surface. The light strip itself is wrapped in soft silicone, which can be easily bent and coiled to adapt to various complex contours and shapes, such as arcs, waves, letters and so on.
- 【24V INPUT】Driven by 24V power supply, The use of 24V voltage can ensure that the brightness at the beginning and the end of the strip is almost the same.It is recommended to use at least 24V 100W power supply(Power supply and Controller not included).
Full Specifications
| Brand | GOMING |
|---|---|
| Color | WS2811 LED(LED Strip Only) |
| Theme | Decorate |
| Voltage | 24 volts_of_direct_current |
| Wattage | 16 watts |
| Material | Copper, Plastic |
| Occasion | Home |
| Unit Count | 1 Count |
| Item Length | 393.7 inches |
| Light Color | Multicolor |
| Model Number | COB-WS2811-576L-IP67 |
| Power Source | 24V 100W power supply(Power supply and Controller not included) |
| Material Type | Copper, Plastic |
| Number of Items | 1 |
| Special Feature | Color Changing |
| Light Source Type | LED |
| Additional Features | Color Changing |
| Included Components | 1X 24V IP67 Waterproof WS2811 Neon COB RGB LED Strip Light |
| Indoor Outdoor Usage | Outdoor |
| Indoor/Outdoor Usage | Outdoor |
| Full listing title | GOMING 24V 32.8ft WS2811 RGB Neon COB LED Strip Addressable IP67 Waterproof | 10M Neon Rope Light 576LEDs/M 16W/M Self-Adhesive LED Tape for DIY Home Decor(Power Supply and Controller not Included) |
Ready to buy?
GOMING 24V 32.8ft WS2811 RGB Neon COB LED Strip Addressable IP67 Waterproof | 10M Neon Rope Light 576LEDs/M 16W/M Self-Adhesive LED Tape for DIY Home Decor(Power Supply and Controller not Included) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- RTX 3060 12GB for ComfyUI & Stable Diffusion: The VRAM Budget Pick (2026)
- Best Nintendo Switch Accessories for Handheld and Docked Play in 2026
- Custom Steam Controller Startup: Reviving OG Big Picture Mode
- Build a Silent Pi 4 NVMe Homelab: Cooling, VESA, SSD Boot
- Best SSD and Controller Pairing for a Living-Room Gaming PC
- Open WebUI on a Raspberry Pi 4, Inference on an RTX 3060: The Split-Brain Home LLM Stack
- Air vs AIO for the Ryzen 7 5800X: Noctua NH-U12S vs CoolerMaster ML240L
- Local LLM vs Claude in 2026: What an RTX 3060 12GB Rig Actually Replaces
- Best Raspberry Pi for Local LLMs & Home Lab in 2026: Pi 4 8GB vs Pi Zero
- RX 9060 XT vs RX 9070 XT: OLED 1440p or 4K IPS?
- Best Dorm Room Gaming Setup in 2026: 5 Picks That Fit One Desk
- Turtle Beach Recon 50 in 2026: Is the $40 Gaming Headset Still Worth It?
- Self-Hosting Jellyfin on a Raspberry Pi 4 8GB: Real Performance
- Best Budget SSD for 2026: 5 SATA and NVMe Picks
- Aider vs Cline vs Continue.dev for Local-LLM Coding on a 12GB GPU
- Turn a Raspberry Pi Pico W Into a Driverless USB WiFi Adapter
- Noctua NH-U12S vs DeepCool AK620 on Ryzen in 2026: Honest Pick
- Microsoft's Copilot Goes Agentic — Run Your Own Agent Locally on an RTX 3060
- Glide vs OpenGL vs Direct3D: The PC Gaming API War 1996-2003, Benchmarked
- Is the KOORUI 27-inch 4K Mini-LED a Real Upgrade for Console Gaming?
- Putting a Modern SATA SSD in a Win98/XP Retro Build via an IDE Bridge
- Hands-On: Asus ROG Harpe II Extreme Edition 20 Gaming Mouse
- Best 4K Monitor for PS5 and Console Gaming Under $400 (2026)
- Best SATA SSD for a Retro Windows XP or 98 Build (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090