Joystick Mount for VKB Gladiator NXT
Bottom line: The Joystick Mount for VKB Gladiator NXT is a specs-and-price decision rather than a crowd-consensus one in the flight sim gear category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Before you buy
- Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Joystick Mount for VKB Gladiator NXT, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the flight sim gear category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, load rating and mounting or device compatibility in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- FITS 20 X 60 MM BOSCH-TYPE PROFILES – The bracket is designed to match 20 x 60 mm Bosch-type aluminum extrusion profiles, the type used in simulator rigs, aluminum frames, and workbenches.
- PLUG-AND-PLAY INSTALL – Mounts using the original screws from your VKB mounting plate, with no extra drilling and no modification to the profile.
- RIGID PETG-CF PRINT – Carbon-fiber reinforced PETG with optimized wall thickness for high stiffness and shape retention under hard stick inputs.
- PRINTS WITHOUT SUPPORTS – The design is built for a clean print without support structures: faster printing, less material, and no support residue on the contact surfaces.
- THIRD-PARTY ACCESSORY – Designed for the VKB Gladiator NXT. Not an official VKB product and not affiliated with or endorsed by VKB Sim. Joystick, profile, and screws not included.
Full Specifications
| Full listing title | Joystick Mount for VKB Gladiator NXT – 3D Printed Bracket for 20 x 60 mm Bosch-Type Aluminum Profile, PETG-CF, Plug-and-Play with Original Screws, for Sim Rigs |
|---|
Ready to buy?
Joystick Mount for VKB Gladiator NXT – 3D Printed Bracket for 20 x 60 mm Bosch-Type Aluminum Profile, PETG-CF, Plug-and-Play with Original Screws, for Sim Rigs is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Flight Sim Gear
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Build a Local Voice Assistant on a Raspberry Pi 4 8GB in 2026: Full BOM and Real Limits
- Why Retro Cables Are Melting Into Their Cases in Storage
- Best Controller for PC Gaming in 2026: GameSir G7 SE vs DualSense vs HORI
- RTX 3060 12GB vs RTX 4060 Ti 16GB for Gemma 3 12B (2026)
- Linux Fu: Upcycling an Old Router in 2026
- RTX A6000 48GB vs RTX 3090 24GB for Production LLM Inference (2026)
- Best Esports Club Practice Room Gear in 2026
- Gemma 3 12B: RTX 3060 12GB vs Ryzen 7 5800X CPU Offload (2026)
- Iris-mini vs Iris-pro on an RTX 3060 12GB: Which Open-Weight Search Agent Fits 12 GB VRAM
- CRT vs LCD for Retro Gaming: Which Wins in 2026?
- Ryzen AI Max+ 395 Motherboard Guide: What You Can Upgrade
- Best Budget FPS Gaming Setup Under $120: Mouse, Pad, Keyboard and Headset for 2026
- Silent Cooling for a Retro Sleeper PC: Fitting a Modern Quiet Fan to a Vintage Case
- Building a Period-Correct 1998 Voodoo2 SLI Win98 Gaming PC in 2026: Parts, Boot Media, and Glide Setup
- RetroArch Cores Download Guide: Safe Sources 2025
- CompactFlash as a Silent IDE Boot Drive: A 1998-Era Build Log
- Build a 2001 GeForce3 + Win98 SE Gaming Rig in 2026: Parts and Gotchas
- Jellyfin on a Ryzen 5 5600G: 4K Transcoding on a $400 Mini-Server (2026)
- Open WebUI vs LM Studio: Best Local Chat Front-End for a 12GB GPU
- Best CPU Cooler for a Ryzen 7 5800X (AM4) in 2026
- Best Retro Console Reissues to Buy in 2026
- Best SSD to Upgrade Your PS4 Pro in 2026: SATA Drives That Actually Speed It Up
- Save $550 on iBuyPower RTX 5070 + 7800X3D 4K Gaming PC
- Best Budget CPU for 1080p Gaming: Ryzen 7 5700X vs 5800X vs i7-9700K
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090