coolerguys
Coolerguys Pre-Set Thermal Controlled Cooling Kits for Cabinets
Bottom line: The Coolerguys Pre-Set Thermal Controlled Cooling Kits for Cabinets ($49.95 on Amazon as of 2026-10-06): Thermal controller spins the two 120mm fans only when heat actually builds up; main trade-off: thermal plastic build rather than a metal housing.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Thermal controller spins the two 120mm fans only when heat actually builds up
- ✓ Ultra-quiet 120mm fans keep AV cabinets and racks near-silent
- ✓ Includes all screws, cables, and fasteners for a no-extra-parts install
- ✓ Pre-set controller works out of the box with no manual tuning
Cons
- ✗ Thermal plastic build rather than a metal housing
- ✗ Trigger temperature is pre-set, not user-adjustable
- ✗ Two 120mm fans may undersize large or fully sealed enclosures
- ✗ No fan-speed display or RPM readout
SpecPicks Verdict
SpecPicks scored Coolerguys Pre-Set Thermal Controlled Cooling Kits for Cabinets using a rating × review-volume × price-fit model applied to published specs and reviews across the cooling & fans category. coolerguys's cooling & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cooling & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Includes (2) Ultra quiet 120mm Fans
- Also includes a thermal controller that only turns fans on when needed
- All necessary screws, cables, and fasteners to complete the unit are included
Full Specifications
| Brand | coolerguys |
|---|---|
| Model | Cabcool1202 |
| Voltage | 12 Volts |
| Wattage | 4 watts |
| Material | Plastic |
| Unit Count | 1.0 Count |
| Noise Level | 22 Decibels |
| Part Number | 840556082224H |
| Material Type | Plastic |
| Cooling Method | Air |
| Number of Items | 2 |
| Air Flow Capacity | 92 Cubic Feet Per Minute |
| Compatible Devices | Cabinets, AV, and Components |
| Power Connector Type | 4-Pin |
| Maximum Rotational Speed | 1200 RPM |
| Item Dimensions L x W x H | 13"L x 1.2"W x 6.2"H |
| Full listing title | Coolerguys Pre-Set Thermal Controlled Cooling Kits for Cabinets, AV, and Components (Dual 120mm, Thermal Plastic) |
Ready to buy?
Coolerguys Pre-Set Thermal Controlled Cooling Kits for Cabinets, AV, and Components (Dual 120mm, Thermal Plastic) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Cooling & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Dual GPU Llama.cpp Speedup: What Actually Helps
- DIY Open-Source Photo Frame: Pi Zero 2 W + Immich
- AMD RX 9070 XT Hits All-Time-Low $629 in Amazon Lightning Sale
- How to run Qwen 3 14B on Apple M4 Max
- RTX 5070 Ti vs 4070 Ti SUPER
- Tenstorrent TT-QuietBox 2 (Blackhole) vs RTX 5090: Should LLM Builders Care?
- Best Controllers for Steam Deck and PC in 2026
- vLLM vs llama.cpp on an RTX 3060 12GB for Local Chat
- Intel llm-scaler-vLLM 1.4 with Arc Pro B70: Local Inference vs RTX 3060 12GB
- OpenAI's Codex Price War: When Local Coding on an RTX 3060 Wins
- Sound Blaster AWE32 vs AWE64: The 1998 MIDI Decision
- Troubleshooting Corsair 12V-2x6 Cable Issues on RTX-Class GPUs (2026)
- RX 580 in 2026: Still Worth It for 1080p Gaming?
- How to run DeepSeek-R1 32B on AMD Radeon RX 7900 XTX
- RTX 5060 8GB vs RTX 4070 12GB for Qwen3 14B: Does 8GB Fit? (2026)
- GLM-5.2 vs Claude Opus 4.7: Open-Weights Value on Local GPUs
- Ryzen 5 5600G vs Ryzen 7 5700X for Budget 1080p Gaming
- Building a 2002 Windows XP Gaming Rig: GeForce 4 Ti, Sound BlasterX G6, CompactFlash Boot
- RTX 3080 vs RTX 5080 — is it time to upgrade?
- Open WebUI on a Raspberry Pi 4, Inference on an RTX 3060: The Split-Brain Home LLM Stack
- Samsung's 256GB microSD Falls to $47.99 — Plus the SSD Sidegrade
- How to Find and Join Active Quake 3 and UT99 Servers in 2026
- Best Cooler for the Ryzen 7 5800X: NH-U12S vs AK620 vs ML240L
- OpenAI Says 'Chat Is Dead': Building a Local Agent Rig in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090