Tripp Lite Standard 5-15P Power Cord to C13 Y-Splitter Cable
Bottom line: The Tripp Lite Standard 5-15P Power Cord to C13 Y-Splitter Cable: Powers two C13-input devices from a single NEMA 5-15 outlet; main trade-off: 10A rating is shared across both legs, not 10A per device.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Powers two C13-input devices from a single NEMA 5-15 outlet
- ✓ Frees a UPS or surge protector outlet for other gear
- ✓ UL-listed SJT jacket with three 18 AWG conductors
- ✓ 6 ft overall reach for desks, racks and shelves
- ✓ Backed by Tripp Lite's lifetime limited warranty
Cons
- ✗ 10A rating is shared across both legs, not 10A per device
- ✗ 125V rating; North American 5-15 outlets only
- ✗ Listing gives conflicting trunk and leg lengths; measure your setup first
- ✗ Fixed split point limits how far apart the two devices can sit
Manufacturer description
The Tripp Lite P006-006-2 power cord splitter runs two devices from one outlet. One end has a NEMA 5-15P plug that fits a standard North American receptacle. The other end splits into two IEC-320-C13 connectors, so you can power two computers, monitors, printers or other peripherals with C14 inlets from a single outlet. If your UPS or surge protector is short on outlets, this frees one up. The cable is 6 feet (1.83 meters) long overall. It is a UL-listed SJT cord with three 18 AWG conductors, rated for 10 amps at 125 volts. Remember that the 10A rating is shared by both C13 legs. Add up the…
SpecPicks Verdict
SpecPicks scored Tripp Lite Standard 5-15P Power Cord to C13 Y-Splitter Cable using a rating × review-volume × price-fit model applied to published specs and reviews across the cables & connectors category. TRIPP LITE's cables & connectors lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cables & connectors of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this splitter fit a standard desktop PC or monitor power port?
Yes, if the device has a standard IEC C14 inlet, which most desktop PSUs, monitors and printers use. Each of the two C13 ends plugs into one C14 inlet.
Can I run two gaming PCs off this one cord?
Only if their combined draw stays under the cord's 10A rating at 125V. That limit is shared by both legs, so two high-wattage systems under heavy load can exceed it.
How long is the cable?
It is 6 feet (1.83 meters) overall, from the NEMA 5-15P plug to the C13 ends. The listing gives different figures for the trunk and leg lengths, so measure the distance between your devices before you buy.
What gauge and jacket does the cord use?
It is a UL-listed SJT power cord with three 18 AWG conductors, rated for 10 amps at 125 volts.
Does the Tripp Lite P006-006-2 have a warranty?
Yes. Tripp Lite covers it with a lifetime limited warranty. Check the product listing or the Tripp Lite website for the full terms and how to file a claim.
Key Features
- UNIVERSAL AC POWER CORD SPLITTER: Allows you to connect two devices with C14 connections, such as computers, to one power outlet.
- PLUG TYPE: With two C13 connectors on one end and a NEMA 5-15P plug on the other, the 6’ cable allows you to connect two devices with C13 inputs, such as computers, printers and other peripherals, into one standard North American receptacle.
- SIX-FOOT Y SPLITTER POWER CABLE: 6ft overall length - 36" from 5-15P to split, 36" from split to C13's.
- SUPERIOR QUALITY: This UL-listed SJT power cord has three 18 AWG conductors and a 10-amp rating.
Full Specifications
| Brand | TRIPP LITE |
|---|---|
| Color | Black |
| Gauge | 18 |
| Voltage | 125 volts |
| Wattage | 400 watts |
| Amperage | 10 A |
| Plug Type | Type B |
| Unit Count | 6 Feet |
| Item Length | 72 inches |
| Plug Format | Type B |
| Model Number | P006-006-2 |
| Input Current | 10 A |
| Built-In Media | P013-006 3-Slot Power Cord, NEMA 5-15P to C5 - 6 ft., Black |
| Mfr Part Number | P006-006-2 |
| Connector Gender | Female, Male |
| SUPERIOR QUALITY | This UL-listed SJT power cord has three 18 AWG conductors and a 10-amp rating. |
| Number of Outlets | 1 |
| Case Material Type | Polyvinyl Chloride (PVC) |
| Number Of Conductors | 3 |
| Power Cord Prong Count | 3 |
| Full listing title | Tripp Lite Standard 5-15P Power Cord to C13 Y-Splitter Cable, 10A, 125V, 18 AWG, NEMA 5-15P to 2X IEC-320-C13, 6 Feet / 1.83 Meters, Lifetime Limited Warranty (P006-006-2) |
Ready to buy?
Tripp Lite Standard 5-15P Power Cord to C13 Y-Splitter Cable, 10A, 125V, 18 AWG, NEMA 5-15P to 2X IEC-320-C13, 6 Feet / 1.83 Meters, Lifetime Limited Warranty (P006-006-2) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cables & Connectors
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Voodoo3 3000 PCI Install Guide for Win98 SE in 2026
- Best 1440p Monitor for the RTX 3060 12GB (2026)
- When Does a Homelab Become a Job?
- RTX 5090 vs RX 7900 XTX — does AMD still matter?
- Best Budget GPU for Stable Diffusion and SDXL in 2026
- How to run DeepSeek-R1 32B on Apple M4 Max
- Best SATA SSD for Boot Drive Upgrades on Aging Desktops (2026)
- 180Hz 1440p Monitors Hit Entry Pricing — Here's How the 4K Tier Compares
- LLM-Driven Driver Install on Windows 98: How Claude Walks Voodoo + Sound Blaster Setup
- Run a Local LLM on a Raspberry Pi 4 (8GB) in 2026: What Actually Works and How Slow It Is
- DwarfStar Distributed Inference: Splitting a Single LLM Across a Home LAN of Mismatched GPUs
- Best Quiet PC Cooling Upgrades in 2026
- Best Retro Gaming Storage Adapters for Win98 and DOS PCs in 2026
- Run DeepSeek & Qwen Locally on an RTX 3060 12GB (2026 Guide)
- Ryzen 7 9800X3D vs Ryzen 9 9900X3D: Which Zen 5 X3D Chip Wins in 2026?
- Best Game Controller for PC in 2026: 5 Picks Tested Against Real Use
- Best 4K Monitor for PS5 and Console Gaming Under $400 (2026)
- Run Soofi S 30B Locally: What a 12GB RTX 3060 Can Actually Do
- Best Sim Racing Wheel & Pedal Setup in 2026
- 768GB Intel Optane DIMMs Running a 1-Trillion-Parameter LLM: How the Build Actually Works
- Forza Horizon 6 Advanced Shader Delivery: 4-Second Loads vs 90 Seconds Explained
- Best SSD for a Local AI / LLM Workstation in 2026
- Microsoft and Mistral Sign Multi-Billion Europe AI Infra Deal
- Ryzen 7 5800X vs 5800X3D for 1440p Gaming: Which Should You Buy?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090