StarTech 2-Port PCI RS422/485 Serial Adapter Card, TAA (PCI2S4851050)
Bottom line: The StarTech.com StarTech 2-Port PCI RS422/485 Serial Adapter Card is a specs-and-price decision rather than a crowd-consensus one in the expansion cards category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Supports maximum data transmission rate of 128Kbps
- ✓ Backed by StarTech.com's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
The PCI2S4851050 2-Port PCI Serial Adapter Card (RS422/RS485) with 161050 UART adds two DB9 RS422/RS485 serial ports, using a single PCI expansion slot. The PCI serial card offers a high performance 16C1050 UART and supports both 2-wire and 4-wire RS485 modes. The card delivers an efficient single-chip design and a large 256-byte transit/receive FIFO buffer that work together to provide high-speed serial communication while reducing the overall load on the system CPU. With the included standard and low profile/half-height brackets, this PCI serial expansion card suits a broad range of system…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for StarTech.com StarTech 2-Port PCI RS422/485 Serial Adapter Card, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the expansion cards category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for expansion cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Supports maximum data transmission rate of 128Kbps
- 16C1050 UART with 256-byte Deep FIFO
- Supports 2-wire and 4-wire RS485 modes
- Jumper pins for RS422/485 toggling
- Supports Hardware and Software flow control
Full Specifications
| Brand | StarTech.com |
|---|---|
| Style | Classic |
| Style Name | Classic |
| Unit Count | 1 Count |
| Model Number | PCI2S4851050 |
| Mfr Part Number | PCI2S4851050 |
| Number of Items | 1 |
| Number of Packs | 1 |
| Compatible Devices | Printer |
| Hardware Interface | PCI |
| Warranty Description | Lifetime warranty |
| Item Dimensions L x W x H | 4.7"L x 4.7"W x 1.8"H |
| Global Trade Identification Number | 00065030842587 |
Ready to buy?
StarTech 2-Port PCI RS422/485 Serial Adapter Card, TAA (PCI2S4851050) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Expansion Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- Cosmos3-Super on an RTX 3060 12GB: Can the #1 Open-Weights Image Model Run Local?
- Qwen3.6 27B on a 12GB GPU: Which Quantizations Fit, and How Much Context
- GameSir G7 SE vs HORIPAD Pro: Best Wired PC Controller
- Self-Hosting Immich on a Raspberry Pi 4 8GB: Power and Performance
- Best CompactFlash and SATA/IDE Adapter for a Retro PC Boot Drive in 2026
- Used RTX 3090 for Local LLMs (Nov 2026): Real Prices, Speeds, Servicing
- GameSir G7 SE vs 8BitDo Pro 2 vs DualSense for PC
- Best Budget GPU for CNN and Image-Model Training in 2026: The RTX 3060 12GB Deep Dive
- Best SSD for Retro PC IDE-to-SATA Builds (Win98, WinXP) in 2026
- AI-Assisted Voodoo Driver Surgery on Windows 98
- Best Budget AM4 CPU for a 2026 AI + Gaming Build: 5800X vs 5700X vs 5600G
- Best NVMe SSD for Local LLM Model Storage in 2026
- Qwen3 Local: RTX 3060 12GB Build vs Mac Mini for Inference
- Best CPU Cooler for Ryzen 7 5800X Overclocking in 2026
- Minimal Raspberry Pi 5 Case: Friction-Fit 3D Printing Guide
- RTX 3060 12GB for Local LLMs: The Complete 2026 Guide
- Build a $20 DualSense PC Adapter: The Open-Source Sony Workaround
- MLX engine comparison… and oMLX is the top choice.
- Best 4K Monitor for an RTX 3060 12GB: KOORUI vs Samsung Odyssey
- Best SATA SSD for Gaming and Console Upgrades in 2026
- 3dfx Voodoo2 SLI in 2026: Build Guide, Glide Setup, CF Storage
- Black Friday SSD Deals: 5 NVMe and SATA Drives Worth Buying
- Self-Hosting Jellyfin on a Ryzen 5 5600G: 4K Transcode on the Cheap
- AI Coding Agents Find the Right File but Miss the Lines — What Local Code Models on a 12GB GPU Get Wrong
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090