Fluke 325 True-RMS Clamp Meter with Frequency
Bottom line: The Fluke 325 True-RMS Clamp Meter with Frequency: True-RMS sensing holds accuracy on non-linear loads like VFDs and switching supplies; main trade-off: resistance range stops at 4 kilohms, limiting electronics bench work.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ True-RMS sensing holds accuracy on non-linear loads like VFDs and switching supplies
- ✓ 400 A AC range covers most residential and light commercial motor loads
- ✓ 30 mm jaw reads current without breaking or touching the conductor
- ✓ CAT IV 300 V and CAT III 600 V per IEC 61010-1, rated for panel work
- ✓ Frequency, temperature and capacitance built in, replacing two or three handhelds
Cons
- ✗ Resistance range stops at 4 kilohms, limiting electronics bench work
- ✗ 30 mm jaw is too small for large service-entrance conductors or busbars
- ✗ 600 V ceiling rules out medium-voltage and many industrial feeders
- ✗ Listing specs conflict on AC-only versus AC/DC amps, so confirm before ordering
Manufacturer description
The Fluke 325 True-RMS Clamp Meter handles the measurements a grab-and-go electrical troubleshooting kit actually needs. Its jaw opens to clamp conductors up to 30 mm, so you read AC current up to 400 A without breaking the circuit or touching a live conductor. True-RMS sensing keeps readings accurate on linear and non-linear loads alike - VFDs, LED drivers, switching supplies - where an averaging meter drifts. Beyond current, the Fluke 325 measures AC and DC voltage to 600 V and resistance to 4 kilohms, plus frequency, temperature, and capacitance, so one tool covers motor starts, control…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Fluke 325 True-RMS Clamp Meter with Frequency, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. On the listing's own facts, the case for it is "True-RMS sensing holds accuracy on non-linear loads like VFDs and switching supplies"; the main trade-off is "Resistance range stops at 4 kilohms, limiting electronics bench work". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
How much current can the Fluke 325 measure?
It measures AC current up to 400 A. The jaw opens wide enough for a conductor up to 30 mm, so you can take the reading without touching or interrupting the circuit.
Does the Fluke 325 measure temperature and capacitance too?
Yes. Alongside current, this model adds frequency, temperature, and capacitance measurements, plus AC and DC voltage to 600 V and resistance to 4 kilohms.
Is the Fluke 325 rated for electrical panel work?
It meets IEC safety standard 61010-1 and carries a CAT IV rating to 300 V and a CAT III rating to 600 V, which covers service-entrance and branch-circuit measurements.
What does True-RMS mean on this clamp meter?
True-RMS sensing gives accurate readings on both linear and non-linear loads regardless of waveform, so electronic ballasts, drives, and switching supplies read correctly instead of low.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600 V, and resistance to 4 kilohms
- True RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
- Jaw opening measures current in a conductor up to 30 millimeter without touching or interrupting the circuit
- Audible continuity sensor confirms that the circuit conducts electricity
- Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300 V and CAT III installations to 600 V
- 400 A AC and DC current measurement
Full Specifications
| Brand | Fluke |
|---|---|
| Color | yellow |
| Model | FLUKE-325 |
| Style | Fluke 325 TRMS Clamp Meter w/ Frequency, Temp, & Capacitance Measurements |
| Style Name | Fluke 325 TRMS Clamp Meter w/ Frequency, Temp, & Capacitance Measurements |
| Unit Count | 1.0 Count |
| Part Number | FLUKE-325 |
| Power Source | Alkaline |
| Item Type Name | Tester |
| Item Dimensions | 9.45 x 11 x 3.15 inches |
| Measurement Type | Multimeter |
| Specification Met | Iec |
| Included Components | Fluke - Ac/Dc Clamp Meter (325) |
| Global Trade Identification Number | 00095969623766, 00696335208978 |
| Full listing title | Fluke 325 True-RMS Clamp Meter with Frequency, Temperature & Capacitance Measurements | Frequency Measurements, Temperature Measurements, Capacitance Measurements |
Ready to buy?
Fluke 325 True-RMS Clamp Meter with Frequency, Temperature & Capacitance Measurements | Frequency Measurements, Temperature Measurements, Capacitance Measurements is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- BOSGAME VTA-439: A Linux-Friendly Ryzen AI 9 HX 470 Mini PC
- Ryzen 5 5600X vs Ryzen 7 5800X: CPU-Only Qwen2.5 14B (2026)
- Is the RTX 3060 12GB Still Worth It for 1080p Gaming in 2026?
- Build a Low-Power Pi Home Server with NVMe in 2026
- Raspberry Pi AI HAT+ 2025: TOPS, Price, Setup Guide
- Raspberry Pi 5 IOMMU Driver Lands for the Mainline Linux Kernel
- Thrustmaster TH8A vs the G29's Stock Shifter: Is a Standalone H-Pattern Worth It?
- Using Claude to Auto-Generate Period-Correct DOSBox-X Configs for 90s PC Games
- RTX 3060 12GB vs Ryzen 7 5800X for Qwen3 14B Local Inference (2026)
- RE Requiem and the AAA Games That Prove Steam Deck
- Self-hosting an OpenAI-compatible LLM gateway with LiteLLM
- The Best Raspberry Pi Projects for Students in 2026 (With a Real Parts List)
- Cursor vs Cline vs Aider for Local-First AI Coding in 2026
- CompactFlash Boot Drive for Windows 98: Transcend CF133 Setup and Benchmarks
- Build a Couch Emulation Station: Raspberry Pi 4 + 8BitDo SN30 Pro
- Raspberry Pi 5 + Hailo-8L vs Coral Dual Edge TPU: Which AI Accelerator HAT Wins in 2026?
- Best DualSense Controllers and Adapters for PC in 2026
- RTX 5080 vs RTX 4090: Is the Future-Proofing Worth It?
- Best Game Controller for PC in 2026: 5 Picks Tested Against Real Use
- Used RTX 3090 for Local LLMs (Nov 2026): Real Prices, Speeds, Servicing
- Dual RTX 3060 12GB vs RTX 3090 24GB for Qwen2.5 32B (2026)
- LLM-Driven Driver Install on Windows 98: How Claude Walks Voodoo + Sound Blaster Setup
- FIDECO vs Unitek vs Vantec: The Best IDE-to-USB Adapter for Rescuing Retro Drives in 2026
- Building a 2001 LAN-Party Rig: Pentium III, GeForce 3, Win98 SE Period-Correct Build Log
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090