OKGEAR 4-Pin Male to Female Molex Fan Power Extension Cable, Sleeved, 18 inches
Bottom line: The OKGEAR 4-Pin Male to Female Molex Fan Power Extension Cable: About 18 inches of added reach for Molex leads that stop short; main trade-off: single pass-through only; it won't split one lead into several devices.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ About 18 inches of added reach for Molex leads that stop short
- ✓ Male-to-female design runs straight from the PSU lead to the device
- ✓ Sleeved jacket keeps wires bundled for tidier cable runs
- ✓ Fits full-tower and retro AT/ATX cases with long lead distances
- ✓ Standard 4-pin Molex works with fans, drives and adapters
Cons
- ✗ Single pass-through only; it won't split one lead into several devices
- ✗ Wire gauge isn't listed, so check the current rating for high-draw parts
- ✗ Length is stated as approximate, not exact
- ✗ Sleeve color isn't specified in the listing
Manufacturer description
The OKGEAR 4-Pin Male to Female Molex Fan Power Extension Cable adds about 18 inches of reach between your power supply's Molex lead and the device that needs power. If a PSU harness stops short of a front-mounted fan, a top drive bay, or a fan controller on the far side of a full-tower case, this cable covers the gap so you don't have to stretch or reroute existing wiring. One end has a male 4-pin Molex plug and the other has a female 4-pin Molex socket, so it works as a straight pass-through extension. You plug the PSU lead into one end and your fan, adapter, or drive into the other. The…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for OKGEAR 4-Pin Male to Female Molex Fan Power Extension Cable, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies & cables category before committing. On the listing's own facts, the case for it is "About 18 inches of added reach for Molex leads that stop short"; the main trade-off is "Single pass-through only; it won't split one lead into several devices". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
How long is the OKGEAR Molex extension cable?
It is approximately 18 inches long. The listing gives the length as approximate, so allow a little slack when you plan a tight cable route.
Which connectors are on each end?
One end has a male 4-pin Molex plug and the other has a female 4-pin Molex socket. It extends an existing Molex lead without changing the connector type.
Can I use it to power more than one fan or drive?
No. It is a one-in, one-out extension, not a splitter. To power several devices from one lead, pair it with a separate Molex splitter.
Will it work in a retro PC build?
Yes, as long as the device uses a standard 4-pin Molex connector. Many vintage drives, fans and adapters do, and the 18-inch length helps when an older or swapped PSU's leads don't reach the drive bays.
Is it safe for high-power components?
The listing doesn't give a wire gauge or current rating. For high-draw devices, check the product listing or contact OKGEAR to confirm it handles your load before installing.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Approximately 18" in length
Full Specifications
| Brand | OKGEAR |
|---|---|
| Color | Black |
| Model | 840556088622 |
| Cable Type | Power Extender |
| Item Shape | Round |
| Model Name | 4 Pin Molex Sleeved Fan Cable extension |
| Unit Count | 1.0 Count |
| Item Length | 18 Inches |
| Part Number | 840556088622 |
| Connector Type | 4 |
| Number of Pins | 4 |
| Outer Material | nylon flex braided material |
| Maximum Voltage | 12 Volts |
| Special Feature | Braided |
| Connector Gender | Male-to-Female |
| Compatible Devices | Computer, Personal Computer |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Customer Package Type | Standard Packaging |
| Compatible Phone Models | No Compatible Phone Models |
| Recommended Uses For Product | Extend the length of an existing disk drive power cable |
Ready to buy?
OKGEAR 4-Pin Male to Female Molex Fan Power Extension Cable, Sleeved, 18 inches is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- A 180Hz 1440p Gaming Monitor at Entry-Level Pricing — How It Stacks Against Our 4K Picks
- AMD Revives Zen 2: Ryzen 7 4700LE in $800 RTX 3050 Prebuilts
- OpenAI Says 'Chat Is Dead': Building a Local Agent Rig in 2026
- CUDA 13.3 and the RTX 3060: What Changes for Local LLM Inference
- Open-Source NVIDIA NVK Vulkan Driver Adds DLSS Support: What It Means for RTX 3060 Owners
- Claude Mythos: What Anthropic Found + Why Regulators Were Briefed
- Best GPU for Local LLMs Under $400: Why the RTX 3060 12GB Beats the 8GB Trap
- Blue Yeti vs HyperX QuadCast 2 S: Best Streaming Mic Under $200
- Asus ROG Xreal R1 AR glasses pre-orders start today at $849 — 240 Hz virtual gaming at 171 inches on PC…
- Ryzen 5 5600X vs 5700X vs 5800X: Best AM4 Gaming CPU in 2026
- What Is Mistral AI? The OpenAI Rival Explained (2026)
- Boot Windows 98 from CompactFlash: Transcend CF133 + IDE Adapter Guide
- The Adder at the Heart of Intel's 8087 Math Coprocessor
- Best Mid-Range Gaming CPU (2026)
- ASUS Beta BIOS Restores Ryzen 9000 Memory Encryption Ahead of AMD's July Timeline
- Building a period-correct Windows 98 gaming rig in 2026
- Gemma 4 31B Heretic Finetune: Can It Run on a 12GB RTX 3060?
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5070
- Best NVIDIA RTX 3060 Graphics Cards in 2026: 5 AIB Picks Compared
- Acti Puts AI Agents in Your Keyboard: On-Device vs Local-GPU Inference
- Raspberry Pi Pico W Becomes a Driverless USB WiFi Adapter
- How LAN Parties Died: A 2002-2008 Cultural Retrospective
- Best CPU for AI Inference Workstations in 2026
- Claude Code Artifacts Just Shipped: What It Adds, and the Local Aider Alternative
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090