Skip to main content
SilverStone Technology All Black Sleeved 1-to-2 Sleeved PWM Fan Splitter Cable (CPF01)
SilverStone

SilverStone Technology All Black Sleeved 1-to-2 Sleeved PWM Fan Splitter Cable (CPF01)

Bottom line: The SilverStone Technology All Black Sleeved 1-to-2 Sleeved PWM Fan ($7.46 on Amazon as of 2026-11-22 11:29 UTC): Runs 2 PWM fans from a single motherboard PWM header; main trade-off: splits to only 2 fans; bigger fan arrays need a hub.

$7.46 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-11-22. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ Runs 2 PWM fans from a single motherboard PWM header
  • ✓ Frees up headers on boards with few fan connectors
  • ✓ Both fans follow one PWM curve for matched speeds
  • ✓ 100mm length keeps slack minimal for tidy routing
  • ✓ All-black sleeving blends into dark, windowed builds

Cons

  • ✗ Splits to only 2 fans; bigger fan arrays need a hub
  • ✗ 100mm may not reach fans at opposite ends of large cases
  • ✗ Shared signal means no independent speed curve per fan
  • ✗ Combined fan draw must stay within the header's current rating

Manufacturer description

The SilverStone CPF01 is a 1-to-2 PWM fan splitter cable that runs two PWM fans from a single motherboard PWM header. If your motherboard has fewer fan headers than your cooling setup needs, it adds a second fan without a separate fan hub or controller. Plug the CPF01 into any 4-pin PWM header, then connect two fans. Both fans get the same PWM signal, so they speed up and slow down together on whatever curve you set in BIOS or your fan-control software. That works well for paired intake fans, dual-fan radiators, or push-pull fans on a tower cooler, where you want matched speeds anyway. The…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for SilverStone Technology All Black Sleeved 1-to-2 Sleeved PWM Fan…, so this read rests on the manufacturer's listed specs and the current price in the accessories category (how we evaluate). Compare with similarly-priced alternatives in the accessories category before committing. On the listing's own facts, the case for it is "Runs 2 PWM fans from a single motherboard PWM header"; the main trade-off is "Splits to only 2 fans; bigger fan arrays need a hub". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

How many fans can I connect to the SilverStone CPF01?

Two. The CPF01 is a 1-to-2 splitter that connects two PWM fans to a single motherboard PWM header.

How long is the CPF01 splitter cable?

The cable is 100mm long. That suits fans mounted close together, like a dual-fan radiator or a push-pull CPU cooler. Fans far apart in a large case may need an extension.

Can I control each fan's speed separately with this splitter?

No. Both fans share one header's PWM signal, so they follow the same speed curve. If you need separate curves, connect each fan to its own header.

Will it work with 3-pin fans?

The CPF01 is designed for PWM (4-pin) fans on a PWM header. 3-pin fans usually physically fit a 4-pin connector but will not get PWM speed control. Check your motherboard manual to see whether the header supports DC voltage mode.

Is it safe to run two fans from one motherboard header?

Usually, as long as the two fans' combined current draw stays within the header's rated limit. Compare your fans' listed amperage with the header rating in your motherboard manual before connecting.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Beautiful all black sleeved cable
  • Supports 2 PWM fans from a single motherboard PWM header
  • One-to-two PWM fan splitter
  • Length 100mm

Full Specifications

BrandSilverStone
ModelCPF01
MaterialCopper
Cable TypeFan Connector Cable
Unit Count1 Count
Item Length10 centimeters
Part NumberCPF01
Material TypeCopper
Connector Type4-pin Pwm Fan Connector
Item Dimensions6 x 1 x 0.2 inches
Item dimensions L x W x H6 x 1 x 0.2 inches
Recommended Uses For ProductConnecting multiple PWM fans to a motherboard with limited fan connections
Global Trade Identification Number00844761009687

Ready to buy?

SilverStone Technology All Black Sleeved 1-to-2 Sleeved PWM Fan Splitter Cable (CPF01) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $7.46

*Price sourced from Amazon.com. Last updated 2026-11-22. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related Accessories

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →