10Gtek SFP+ DAC Twinax Cable
Bottom line: The 10Gtek SFP+ DAC Twinax Cable: Passive 10GBASE-CU link, no separate SFP+ optics to buy for each end; main trade-off: fixed 2m length, so slack can't be trimmed and short runs need a different SKU.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Passive 10GBASE-CU link, no separate SFP+ optics to buy for each end
- ✓ Listed as compatible with Cisco SFP-H10GB-CU2M, Ubiquiti, Meraki, Fortinet, D-Link
- ✓ 2m (6.6ft) length fits switch-to-server and switch-to-switch runs in one rack
- ✓ Every cable gets TDR and VNA testing to confirm signal integrity
- ✓ Onboard EEPROM read over I2C lets host switches identify the cable
Cons
- ✗ Fixed 2m length, so slack can't be trimmed and short runs need a different SKU
- ✗ Passive copper tops out at the listed 12m option; longer runs need fiber
- ✗ Twinax is thicker and stiffer than fiber patch cords in dense racks
- ✗ Some vendor firmware may still reject third-party cables; check your switch first
Manufacturer description
The 10Gtek SFP+ DAC Twinax Cable is a 2-meter (6.6ft) passive direct attach copper cable for connecting two 10G SFP+ ports without buying separate optical transceivers. It is built to the 10GBASE-CU standard, with an SFP+ connector permanently fixed to each end of a 2-pair differential twinax cable. That makes it a simple way to link a switch to a server, a NAS, or a second switch in the same rack. You can use it with gear from several vendors. 10Gtek lists it as compatible with the Cisco SFP-H10GB-CU2M, Ubiquiti UniFi UC-DAC-SFP+, Meraki, Fortinet and D-Link. Each end has an EEPROM that the…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for 10Gtek SFP+ DAC Twinax Cable, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro networking cards category before committing. On the listing's own facts, the case for it is "Passive 10GBASE-CU link, no separate SFP+ optics to buy for each end"; the main trade-off is "Fixed 2m length, so slack can't be trimmed and short runs need a different SKU". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will the 10Gtek 2m DAC cable work in a Ubiquiti UniFi switch?
10Gtek lists it as compatible with Ubiquiti UniFi and as a replacement for the UC-DAC-SFP+. It plugs into SFP+ ports on both ends. Check that both of your devices have 10G SFP+ ports, not RJ45 10GBASE-T.
Is this a direct replacement for the Cisco SFP-H10GB-CU2M?
Yes, the listing names the Cisco SFP-H10GB-CU2M as a compatible part. It is the same type of cable: 2-meter, passive, 10GBASE-CU twinax with an SFP+ connector on each end. Some Cisco platforms limit third-party modules, so check your switch's policy before you deploy.
Do I need to buy SFP+ transceivers to use this cable?
No. A direct attach copper cable has its SFP+ connectors permanently attached to each end, so you plug it straight into the SFP+ ports. You don't need separate optics or fiber patch cords.
What lengths does the 10Gtek SFP+ DAC come in?
This version is 2 meters (6.6ft). The listing offers other lengths from 0.25m up to 12m. Pick the shortest one that reaches between your ports, because passive twinax can't be shortened.
How is the signal quality of each cable checked?
10Gtek says every DAC cable gets TDR and VNA measurement to confirm it passes signal integrity testing. The cables are made on an automated line that includes laser cutting, shield stripping, automatic soldering and UV curing.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 10GBase-CU, 2 Meter
- 2-pair differential twinax cable, Passive, EEPROM I2C
- Compatible with Cisco SFP-H10GB-CU2M, Ubiquiti, Fortinet and more
- 10Gtek's automatic assembly line, assures the consistency of manufacture under the process of laser cutting, aluminum shielding stripping, isolator stripping, automatic reshaping, automatic soldering and ultraviolet ray curing.
- Each DAC cables take the TDR & VNA measurement, guaranteeing passing the signal integrity test.
Full Specifications
| Brand | 10Gtek |
|---|---|
| Color | x1 |
| Gauge | 30 |
| Model | CAB-10GSFP-P2M-30(Cisco-1pc)(CA) |
| Frequency | 10 GHz |
| Cable Type | PVC Copper Cable |
| Item Shape | Round |
| Unit Count | 6.5 Count |
| Item Length | 2 meters |
| Part Number | CAB-10GSFP-P2M-30(Cisco-1pc)(CA) |
| Connector Type | Sfp+ |
| Number of Pins | 24 |
| Number of Items | 1 |
| Special Feature | Ultra-low Power Consumption, Ultra-low Latency, High Cost-effectiveness. |
| Connector Gender | Male-to-Male |
| Specification Met | Sfp+ Msa |
| Compatible Devices | Cisco SFP-H10GB-CU2M, Ubiquiti UniFi UC-DAC-SFP+, Meraki, Fortinet, D-Link. |
| Data Transfer Rate | 10000 megabytes_per_second |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Customer Package Type | Standard Packaging |
| Full listing title | 10Gtek SFP+ DAC Twinax Cable - 10GBASE-CU Passive Direct Attach Copper SFP Cable for Cisco SFP-H10GB-CU2M, Ubiquiti UniFi UC-DAC-SFP+, Meraki, Fortinet, D-Link, 2-Meter(6.6ft) | 0.25-12m Optional |
Ready to buy?
10Gtek SFP+ DAC Twinax Cable - 10GBASE-CU Passive Direct Attach Copper SFP Cable for Cisco SFP-H10GB-CU2M, Ubiquiti UniFi UC-DAC-SFP+, Meraki, Fortinet, D-Link, 2-Meter(6.6ft) | 0.25-12m Optional is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro Networking Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- How to run Qwen 3 32B on Apple M4 (2026)
- gpt-oss 20B on 16GB GPUs: RTX 5060 Ti vs RX 9060 XT vs RTX 4070 Ti Super
- Jetson Orin Nano Super vs Coral USB: Which One Runs an LLM?
- Best Retro PC Upgrade Kit 2026: Sound & Storage
- Custom Steam Controller Startup: Reviving OG Big Picture Mode
- Best 4K Gaming Monitors Under $600 in 2026
- Voodoo3 3000 PCI vs AGP — Driver Install Troubleshooting in 2026
- CompactFlash as a Win98 Hard Drive: IDE Adapter Setup Guide
- Build Your Own Gaming PC in 2026: The 5 Components That Actually Matter
- ZOTAC RTX 3060 12GB vs Intel Arc B580 12GB for 1440p Gaming in 2026
- Win98 SE on 1GB+ RAM: The vcache Fix Every Retro Builder Needs
- Qwen 3.6 35B-A3B vs Qwen 3.6 27B Dense: Which Local LLM Wins on a Single 24GB GPU?
- Raspberry Pi 4 8GB as a Low-Power Quake 3 / OpenArena / UT99 Dedicated Server (2026 Build Log)
- PS5 DualSense vs 8BitDo Pro 2 on Raspberry Pi 4 RetroPie: Which Controller Wins in 2026?
- Building a Period-Correct 1999 Quake III Arena LAN Rig: Voodoo3, Pentium III, and Win98 SE
- Black Friday Monitor Deals 2026: 5 Picks From $100 1080p to 240Hz OLED
- Sound Blaster X G6 on a Win98 + Voodoo3 Build: Period-Correct Audio That Beats On-Board
- Ryzen 7 5700X + RTX 3060 12GB: The Best Value 1080p Combo in 2026
- GLM-5.2's 37k-Token Reasoning Outputs and What They Mean for Local Rigs
- Build a Jellyfin Media Server on a Raspberry Pi 4 8GB in 2026
- Best Way to Stream a PS4 Pro to PC: Elgato Cam Link 4K Capture Setup
- Best Budget Sim Racing Wheel: Logitech G29 vs HORI vs Thrustmaster
- FLUX.2 Klein 4B for Halloween Art: RTX 3060 12GB vs RTX 5060 8GB
- Best Controller for Retro Emulation on PC: 8BitDo, GameSir, DualSense
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090