PALMER PWT 08 UNIVERSAL 9V
Bottom line: The PALMER PWT 08 UNIVERSAL 9V ($149.99 on Amazon as of 2026-11-20 23:26 UTC, orderable but not in stock): 2,000 mA total output across 8 center-negative outlets; main trade-off: isolation only stated for the 2 switchable outlets, not the other 6.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ 2,000 mA total output across 8 center-negative outlets
- ✓ Two outlets switch between 9V, 12V and 18V for extra pedal headroom
- ✓ Included Y cable combines two outlets for 21, 24, 30 or 36V maximum
- ✓ Switchable outlets isolated from each other and from the other six
- ✓ Fully regulated output with short circuit and overload protection
Cons
- ✗ Isolation only stated for the 2 switchable outlets, not the other 6
- ✗ Per-outlet current limits not listed; you must budget against 2,000 mA total
- ✗ Runs from a separate mains adapter, one more piece to mount and route
- ✗ Only 2 of 8 outlets offer 12V or 18V; the rest suit standard 9V pedals
Manufacturer description
The Palmer PWT 08 Universal 9V is a pedalboard power supply that runs a full board from one unit. It delivers 2,000 mA of total output across 8 standard center-negative outlets, so a row of 9V drive, delay and modulation pedals can all draw from one source. Two of the outlets do more. Each one switches to 9, 12 or 18 volts, so you can give extra voltage to a pedal that has more headroom at a higher setting. Connect those two outlets with the included Y cable and you get one combined outlet at 21, 24, 30 or 36 volts maximum, which suits high-voltage pedals. The two switchable outlets are…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for PALMER PWT 08 UNIVERSAL 9V, so this read rests on the manufacturer's listed specs and the current price in the audio & midi category (how we evaluate). Compare with similarly-priced alternatives in the audio & midi category before committing. On the listing's own facts, the case for it is "2,000 mA total output across 8 center-negative outlets"; the main trade-off is "Isolation only stated for the 2 switchable outlets, not the other 6". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
How many pedals can the Palmer PWT 08 power at once?
It has 8 center-negative outlets sharing 2,000 mA of total output. Add up the current draw of your pedals (listed by each pedal maker) and keep the total under 2,000 mA. Digital and multi-effects pedals usually draw the most.
Can the Palmer PWT 08 run 12V or 18V pedals?
Yes. Two of the 8 outlets switch to 9, 12 or 18 volts, so up to two pedals can run at 12V or 18V while the other outlets power standard 9V pedals.
What is the included Y cable for?
The Y cable joins the two switchable outlets into one output at 21, 24, 30 or 36 volts maximum, for pedals that need a higher supply voltage. In that setup both switchable outlets feed the one pedal.
Are the outlets on the PWT 08 isolated?
Palmer says the two switchable outlets are isolated from each other and from the remaining outlets. The listing does not say whether the other six are isolated from one another, so check Palmer's documentation if you need full isolation to cut ground-loop noise.
What polarity does it use and what comes in the box?
All 8 outlets use standard center-negative polarity, which most guitar pedals use. The package includes the PWT 08, a set of DC cables, a Y cable and a dedicated mains adapter. Check the product listing for current warranty terms.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Package Dimensions: 9.4 L x 19.6 H x 13.0 W (centimeters)
- Package Weight : 1 pounds
- Country of Origin : China
- Brand: Palmer
Full Specifications
| Brand | Palmer |
|---|---|
| Wattage | 36 watts |
| Model Name | PWT08 |
| Unit Count | 1.0 Count |
| Form Factor | Pedalboard-specific |
| Model Number | PWT08 |
| Connector Type | IEC C13 |
| Cooling Method | Air |
| Item Type Name | Audio Interface |
| Package Weight | 1 pounds |
| Item Dimensions | 4.3 x 4.37 x 1.7 inches |
| Mfr Part Number | PWT08 |
| Country of Origin | China |
| Compatible Devices | Laptop |
| Package Dimensions | 9.4 L x 19.6 H x 13.0 W (centimeters) |
| Warranty Description | 5 year. |
| Maximum Input Voltage | 18 Volts (AC) |
| Minimum Input Voltage | 100 Volts (AC) |
| Item dimensions L x W x H | 4.3 x 4.37 x 1.7 inches |
| Connector Type Used on Cable | IEC C13 |
Ready to buy?
PALMER PWT 08 UNIVERSAL 9V is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Audio & MIDI
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Best Quiet CPU Cooler for Silent Workstation and Office Builds 2026
- CompactFlash to IDE Imaging for Win98: Troubleshooting Common Failures
- How Much System RAM for Llama 3.1 70B on a 12GB RTX 3060? The 48GB Kit Question
- Running a Local Coding Agent on an RTX 3060 12GB: Qwen3-Coder in Practice
- Best CompactFlash to IDE Adapter for Win98 SE Builds in 2026
- GeForce 4 Ti 4600 Won't Boot in Windows XP — Field Troubleshooting Guide
- GPT and Claude Flunked Bridgewater's Finance Test — Why a Local RAG Box Fills the Gap
- How to run DeepSeek-R1 32B on Apple M4 Max
- Sega's TMSS Explained: The Lock-Out Chip Behind the Genesis, and Why It Still Trips Up Reissues
- Best Controller for PC Emulation and Retro Gaming in 2026
- Self-Host Immich on a Budget Homelab Box: Storage Tiers That Make Sense
- Best Gaming Headsets and Audio Gear for Console Players in 2026
- Noctua NH-U12S vs ML240L RGB: Best Cooler for a 5800X
- Best Cheap Raspberry Pi Alternatives in 2025
- Sound BlasterX G6 for Retro Gaming PC Audio in 2026
- Best Gaming Headset for PS5 and PC in 2026
- Ryzen 7 5700X vs 5800X for 1080p & 1440p Gaming in 2026
- RX 580 in 2026: Still Worth It for 1080p Gaming?
- Qwen 3.6 27B with MTP: 2.5x Throughput on Local Hardware (Real Benchmarks)
- Audio DSP Firmware for the Raspberry Pi Pico: A 2026 Guide
- Intel Arc LLM Support: What Works in 2026
- Intel Arc Pro B60 24GB vs RTX 3060 12GB: the VRAM math
- Build a Raspberry Pi 4 NAS in 2026: Best SATA SSD Setup Over USB 3.0
- Flux.2-Klein Pipeline: Real-Time Webcam AI at 30 FPS
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090