Skip to main content
Wooden Camera Coiled BNC to BNC Cable, 10" Resting to 20" Extended, Right-Angle Connectors, HD, SDI, for Wireless Systems and On-Board Monitors
Wooden Camera

Wooden Camera Coiled BNC to BNC Cable

Bottom line: The Wooden Camera Coiled BNC to BNC Cable ($16.83 on Amazon as of 2026-11-21 23:20 UTC): 3G-SDI rated coiled BNC cable stretches 10 in resting to 20 in extended; main trade-off: 20 in fully stretched is short for camera-to-monitor runs past arm's length.

$16.83 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ 3G-SDI rated coiled BNC cable stretches 10 in resting to 20 in extended
  • ✓ Right-angle BNC connectors cut cable strain at monitor and transmitter ports
  • ✓ 88 g (0.2 lb) adds almost nothing to a rigged on-board monitor arm
  • ✓ Coil retracts slack instead of dangling near Steadicam and gimbal moves

Cons

  • ✗ 20 in fully stretched is short for camera-to-monitor runs past arm's length
  • ✗ Right-angle ends limit orientation in tight or recessed BNC ports
  • ✗ Coil tension pulls on lightweight monitor mounts during fast repositioning
  • ✗ Only 10 in resting length here; the 20 in version is a separate purchase

Manufacturer description

Coiled HD-SDI - BNC to BNC cable. Extends from 10" resting length to 20" to allow mobility and adjusting of on board monitors, wireless systems, and recorders. Ideal for Teradek wireless systems and Steadicam configurations. Excellent for studio configurations as well as patching. Also available in 20" length. RoHS Compliant. 3G-SDI Rated. Specifications: Weight: 88g (0.2 lbs) Dimensions: 245.0 x 31 x 16.5 mm (10 x 1.2 x 0.6 in) Resting length: 10 inches Fully stretched length: 20 inches

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Wooden Camera Coiled BNC to BNC Cable, so this read rests on the manufacturer's listed specs and the current price in the retro crt & display accessories category (how we evaluate). Compare with similarly-priced alternatives in the retro crt & display accessories category before committing. On the listing's own facts, the case for it is "3G-SDI rated coiled BNC cable stretches 10 in resting to 20 in extended"; the main trade-off is "20 in fully stretched is short for camera-to-monitor runs past arm's length". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • High-Quality Performance: 3G-SDI Rated and RoHS compliant
  • Right-Angle Connectors: Right-angled BNC connectors help reduce strain on the cable during use
  • Coiled Cable: Stretches from 10" resting length to 20" to allow mobility and adjusting of on-board monitors, wireless systems, and recorders
  • Specifications: Weight 88g (0.2 lb.), Dimensions 245.0 x 31 x 16.5 mm (10 x 1.2 x 0.6 in)

Full Specifications

BrandWooden Camera
ColorBlack
Model206300
Weight3g
Frequency3 GHz
Cable TypeCoaxial
Dimensions245.0 x 31 x 16.5 mm
Item ShapeRound
Model NameCoiled BNC to BNC
Unit Count1.0 Count
Item Length20 Inches
Part Number206300
Coiled CableStretches from 10" resting length to 20" to allow mobility and adjusting of on-board monitors, wireless systems, and recorders
ConnectivityWireless
Connector TypeBNC
Number of Pins2
SpecificationsWeight 88g (0.2 lb.), Dimensions 245.0 x 31 x 16.5 mm (10 x 1.2 x 0.6 in)
Connection TypeWireless
Number of Items1
Special FeatureCoiled
Full listing titleWooden Camera Coiled BNC to BNC Cable, 10" Resting to 20" Extended, Right-Angle Connectors, HD, SDI, for Wireless Systems and On-Board Monitors

Ready to buy?

Wooden Camera Coiled BNC to BNC Cable, 10" Resting to 20" Extended, Right-Angle Connectors, HD, SDI, for Wireless Systems and On-Board Monitors is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $16.83

*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related Retro CRT & Display Accessories

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →