BTF-LIGHTING WS2811 Addressable RGB LED Strip 16.4FT 300LED DC12V IP30
Bottom line: The BTF-LIGHTING WS2811 Addressable RGB LED Strip 16.4FT 300LED DC12V IP30: 100 addressable pixels over 16.4FT for true per-segment chasing effects; main trade-off: no power supply or controller included, adding cost to the build.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 100 addressable pixels over 16.4FT for true per-segment chasing effects
- ✓ WS2811 IC delivers 256-level brightness and 24-bit color
- ✓ Cuttable every 3 LEDs, so you can size it to the run exactly
- ✓ UL Recognized strip, wires, and PCB, not just the LEDs
- ✓ Works with WLED, ESP32, ESP8266, Raspberry Pi, and UNO R3 out of the box
Cons
- ✗ No power supply or controller included, adding cost to the build
- ✗ IP30 means zero moisture protection, indoor use only
- ✗ 12V only, connecting 5V or 24V permanently destroys the strip
- ✗ BRG color order trips up configs that assume RGB or GRB
Manufacturer description
The BTF-LIGHTING WS2811 addressable RGB LED strip gives you 16.4 feet of individually controllable 12V lighting in a single reel. Its 300 5050 SMD LEDs are split into 100 addressable pixels, with the WS2811 IC driving each 3-LED group independently for chasing, rainbow, and dream-color effects at 256-level brightness and 24-bit true color. Because the IC controls in groups of three, you can cut the strip every 3 LEDs, then bend, shorten, or extend it to fit the shape of your build. The strip is UL Recognized, including its wires and PCB, and ships on a black flexible board with 3M…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for BTF-LIGHTING WS2811 Addressable RGB LED Strip 16.4FT 300LED DC12V IP30, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. On the listing's own facts, the case for it is "100 addressable pixels over 16.4FT for true per-segment chasing effects"; the main trade-off is "No power supply or controller included, adding cost to the build". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
What power supply do I need for this LED strip?
BTF-LIGHTING recommends a DC12V 4A 48W supply for the full 16.4FT 300LED reel. No adapter is included, so budget for one separately. Never use 5V or 24V, as either will permanently damage the strip.
Does this strip work with WLED?
Yes. The 3PIN JST-SM connector and WS2811 protocol work with ESP32 and ESP8266 boards running WLED, plus Raspberry Pi and Arduino UNO R3. Set the color order to BRG in your software, not RGB.
How many individually controllable pixels does it actually have?
100 pixels. The WS2811 IC drives LEDs in groups of three, so the 300 LEDs on the 16.4FT reel resolve to 100 addressable segments. That also sets the 3-LED cut interval.
Can I use this strip outdoors or in a bathroom?
No. This is the IP30 version, which has no waterproofing and is rated for indoor use only. BTF-LIGHTING offers IP65 and IP67 variants for damp locations; the IP67 version needs mounting clips instead of adhesive.
Is this strip safe to install in my home?
It is UL Recognized, and BTF-LIGHTING states the wires and circuit board carry UL Recognition as well. It arrives with 3M double-sided adhesive on a black flexible PCB for indoor mounting. Check the product listing for current warranty terms.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【3-LED Group Control RGB IC Strip】WS2811 IC is a professional 12V RGB-IC chip with 3-LED group control, supporting dream full color programmable effects.Equipped with high-brightness 5050 SMD RGB lamp beads, it features 256-level brightness and 24-bit true color display for rich, vivid colors.The strip can be cut every 3 LEDs without damage, allowing free shortening, extension and bending.It uses BRG color order; most RGB-IC strips on the market apply WS2811 IC with only brand names different.
- 【UL Listed】UL Recognized LED strip for guaranteed safety, featuring 3M double-sided adhesive, UL Recognized wires and circuit boards.IP30/IP65 versions come with 3M double-sided adhesive for easy mounting; IP67versions require fastening clips (no adhesive included).
- 【Extensive Controller Compatibility】Compatible with multiple controllers: DIY Projects (SP803E,SP805E,ESP32, ESP8266,WLED, Rasp Pi, UNO R3 etc.), Tuya APP (DR03W), BanlanX APP (SP630E/SP530E/SP611E/SP602E/SP608E/SP107E/SP105E etc.),industrial-grade (K1000C, K8000C, etc.). Choose the right controller per your project.Recommended power supply: DC12V 4A 48W (for 16.4FT 300LED strip).
- 【Cuttable Dream Color LED Strip】Flexible UL Recognized PCB with 3PIN JST-SM connectors for easy installation and connection.The LED Strip Color order: B R G.Cuttable every 3 LEDs for custom length and shape. Ideal for LED screens, video walls, signs, hotels, KTV, bars, Christmas and wedding decorations.
- 【IP30 Indoor 】IP30 non-waterproof design. Lightweight with superior double-sided adhesive tape, ideal for various indoor DIY projects.Compatible with most standard DC12V WS2811 IC RGB strips for project extension – please confirm consistent color order and suitable power supply before use.
- 【Package Listed】1xWS2811 LED strip,1x voltage compensation,1x 3PIN male connector .Only support 12V power supply.Do NOT connect to DC5V or DC24V power supply. This will permanently damage the strip.Note: Power supply and controller are not included and need to be purchased separately.
Full Specifications
| Brand | BTF-LIGHTING |
|---|---|
| Color | Black Pcb |
| Style | Modern |
| Theme | Indoor LED Strip Lighting |
| Seasons | Christmas |
| Voltage | 12 volts |
| Wattage | 90 |
| Occasion | Christmas, Halloween, New Year |
| Bulb Base | Wedge |
| Unit Count | 16.4 Feet |
| Form Factor | Strip Lights |
| Item Length | 199.2 inches |
| Light Color | Multicolor |
| Model Number | HD-12V-WS2811-60L-B-IP30 |
| Power Source | Corded Electric |
| Material Type | Silicone Rubber |
| Product Style | Modern |
| Control Method | Voice |
| Bulb Shape Size | S6 |
| Controller Type | Remote Control |
| Full listing title | BTF-LIGHTING WS2811 Addressable RGB LED Strip 16.4FT 300LED DC12V IP30 | 100Pixels IC=RGB+IC UL Listed Black PCB Flexible Chasing Effect for Indoor Home Decor,3M Tape(No Adapter or Controller) |
Ready to buy?
BTF-LIGHTING WS2811 Addressable RGB LED Strip 16.4FT 300LED DC12V IP30 | 100Pixels IC=RGB+IC UL Listed Black PCB Flexible Chasing Effect for Indoor Home Decor,3M Tape(No Adapter or Controller) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- AMD's Ryzen 7 7700X3D Goes Newegg-Exclusive at $329
- Best GPU for Running Llama 3 8B Locally Under $350 (2026)
- Raspberry Pi 4 8GB vs Ryzen 5 5600X: Gemma 3 1B Always-On
- Best Wired Gear for Tournament-Legal LAN Play in 2026
- Best SSD for Retro PC IDE-to-SATA Builds (Win98, WinXP) in 2026
- Raspberry Pi Dual Monitor Setup: Driving Two 4K Displays in 2026
- Lossless Scaling on Steam Deck: Is It Worth It?
- Four Frontier Models in Eight Days: What a 12GB GPU Can Actually Run
- Best 4K Monitor for the PS4 Pro and PS5 in 2026 (Value Pick)
- DeepSeek on the US Entity List: Running V4 Locally in 2026
- New Raspberry Pi 5 Active-Cooler + NVMe VESA Case Lands (3D-Printable)
- KDE Plasma 6.7 X11 vs. Wayland NVIDIA Gaming on CachyOS
- Logitech G920 vs HORI Racing Wheel: Best Starter Sim Wheel in 2026
- Raspberry Pi OS Moves to Linux 6.18 LTS: What the Kernel Jump Means for Pi 4 Owners
- Best GPU for ComfyUI and SDXL Under $400 in 2026
- OpenAI Buys Ona: What Autonomous Codex Means for Local Coding Rigs
- A 180Hz 1440p Gaming Monitor at Entry-Level Pricing — How It Stacks Against Our 4K Picks
- Run DeepSeek & Qwen Locally on an RTX 3060 12GB (2026 Guide)
- Amstrad CPC 464/6128 Emulator on Raspberry Pi Pico 2
- LiteLLM as a Fallback Router: Keep Working When Limits Hit
- Modern Sound Cards on Retro Rigs: The Sound BlasterX G6 for Win9x and DOS Audio
- Local LLM in VSCode: The 2026 Setup Guide
- Aider vs Cline vs Continue.dev for Local-LLM Coding on a 12GB GPU
- Hy3-Preview vs DeepSeek V4 Flash: Where the New Open-Weights Model Actually Lands
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090