ELEGOO
ELEGOO 120pcs Multicolored Dupont Wire M-F, M-M, F-F for Breadboard Jumper
Bottom line: The ELEGOO 120pcs Multicolored Dupont Wire M-F ($6.98 on Amazon as of 2026-10-20 22:13 UTC): All three genders included: 40 M-F, 40 M-M, 40 F-F pins; main trade-off: 20 cm may be short for larger chassis or rack runs.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-20. Price and availability subject to change.
Pros & Cons
Pros
- ✓ All three genders included: 40 M-F, 40 M-M, 40 F-F pins
- ✓ 20 cm / 8-inch length routes around cases and shields
- ✓ Ribbons peel apart for odd-spaced, non-standard headers
Cons
- ✗ 20 cm may be short for larger chassis or rack runs
- ✗ Dupont crimps are friction-fit and can loosen with reuse
- ✗ Thin gauge suits signal lines, not high-current loads
- ✗ Repeating color sequence means duplicate colors within a run
Manufacturer description
Three Connector Types In One Kit: Includes 40 male-to-male, 40 male-to-female and 40 female-to-female jumper wires for connecting breadboards, female sockets, male headers, sensors, displays and controller modules during temporary prototyping 20 cm Length With Separable Ribbons: Each 8 in lead reaches across breadboards and nearby modules without excessive slack; use the 40-wire ribbons as grouped buses or peel off smaller sections and individual wires to match your project layout Color-Code Circuits & Troubleshoot Faster: Multicolored insulation makes power, ground, clock, data and control…
SpecPicks Verdict
SpecPicks scored ELEGOO 120pcs Multicolored Dupont Wire M-F using a rating × review-volume × price-fit model applied to published specs and reviews across the cables & connectors category. ELEGOO's cables & connectors lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cables & connectors of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
What connector types come in this 120-piece kit?
Three 40-pin ribbons: one male-to-female, one male-to-male, and one female-to-female, for 120 wires total.
How long are the ELEGOO jumper wires?
About 20 cm, or 8 inches, per cable.
Can I separate the wires from the ribbon?
Yes. The cables separate into whatever count you need, which is how they support non-standard, odd-spaced headers.
Will these work with a Raspberry Pi GPIO header and a breadboard?
The male-to-female ribbon is the standard way to go from Pi GPIO pins to breadboard rows; check your board's header pitch against the listing before ordering.
Is this a good value compared with buying single-gender packs?
For 120 wires, you get all three genders instead of one. Check the current listing for today's price.
Key Features
- Three Connector Types In One Kit: Includes 40 male-to-male, 40 male-to-female and 40 female-to-female jumper wires for connecting breadboards, female sockets, male headers, sensors, displays and controller modules during temporary prototyping
- 20 cm Length With Separable Ribbons: Each 8 in lead reaches across breadboards and nearby modules without excessive slack; use the 40-wire ribbons as grouped buses or peel off smaller sections and individual wires to match your project layout
- Color-Code Circuits & Troubleshoot Faster: Multicolored insulation makes power, ground, clock, data and control paths easier to identify during LED projects, sensor tests, classroom labs and repeated electronics experiments
- 2.54 mm Connections For Common Headers: Male pins fit compatible 0.1 in female sockets and breadboards, while female ends fit compatible 0.1 in male headers; insert connectors straight and check continuity if a signal becomes intermittent
- Copper-Clad Aluminum With PVC Insulation: The leads are designed for temporary low-voltage signal prototyping rather than mains or high-current wiring; they are not pure-copper wire, automotive jumper cables or a crimp-connector kit
Full Specifications
| Size | 8 inch |
|---|---|
| Brand | ELEGOO |
| Color | 120pcs (F-F/M-M/M-F) |
| Model | EL-CP-004 |
| Warranty | 1 Year Manufacturer |
| UnitCount | 120 |
| ReleaseDate | 2017-08-04T00:00:01Z |
| Manufacturer | ELEGOO |
| IsAdultProduct | false |
| ItemPartNumber | EL-CP-004 |
Ready to buy?
ELEGOO 120pcs Multicolored Dupont Wire M-F, M-M, F-F for Breadboard Jumper is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-20. Price and availability subject to change.
Read our analysis
SpecPicks coverage that features this Cables & Connector.
Related Cables & Connectors
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Super Mario 64 Nintendo DS Port Lands With Multiplayer Support
- Raspberry Pi AI HAT+ Hits 26 TOPS for On-Device Inference
- Run Home Assistant on a Raspberry Pi 4 8GB in 2026 (SSD Boot)
- The KVM That Runs a Pentium 4 Instead of a Raspberry Pi
- 20GB Homelab Memory Left: What to Add Next
- Air vs AIO for the Ryzen 7 5800X: Noctua NH-U12S vs CoolerMaster ML240L
- Gunnir Arc B580 vs RTX 5090D on DeepSeek: The Budget AI-Rig Upset Explained
- Best Raspberry Pi Projects for Beginners in 2026
- Why a Game Boy Clone Ran Too Fast — and the DIY Fix Makers Are Building
- Best PC Gaming Upgrades Under $30 in 2026
- Best Cooling Solutions for Modern Gaming PCs (2026)
- 10 Raspberry Pi Projects for Kids to Build in 2026
- RTX 4090 AI Workstation vs AMD MI300X: 2025 Guide
- Intel Axes BigDL/IPEX-LLM: Where Local Inference Goes Now
- Google's 'Frozen v2' Chip Bakes Gemini Into Silicon: What It Means for Local Rigs
- Samsung 870 EVO vs Crucial BX500: Best Budget SATA SSD for a Secondary or Retro Build in 2026
- Best Budget Gaming Audio for 2026: Headsets, Earbuds, Mics and DACs
- Minecraft on Raspberry Pi via Vulkan: 2026 Setup Guide
- Qwen3.6-35B-A3B vs Gemma 4 26B-A4B: MoE Showdown on Consumer GPUs
- RTX 3090 vs RTX 4090 for LLM Inference: Same 24GB (2026)
- Prime Day 2026: Gaming Monitor and Logitech Peripheral Deals to Watch
- Build Your Own Gaming PC in 2026: The 5 Components That Actually Matter
- vLLM on Windows in 2026: What Actually Works on a 12GB Card
- The $500M Claude Bill: What Local LLM Inference Actually Costs
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090