Skip to main content
Electronics-Salon D-1188 24/20-Pin ATX DC Power Supply Breakout Board Module
Electronics-Salon

Electronics-Salon D-1188 24/20-Pin ATX DC Power Supply Breakout Board Module

Bottom line: The Electronics-Salon D-1188 24/20-Pin ATX DC Power Supply Breakout Board: Accepts 20, 20+4 and 24-pin ATX headers from most desktop PSUs; main trade-off: needs a separate ATX power supply; no PSU is included.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Accepts 20, 20+4 and 24-pin ATX headers from most desktop PSUs
  • ✓ Screw terminals rated 24A per position and 400V for high-current loads
  • ✓ Takes 26AWG to 12AWG wire (up to 2.5mm2) with a 7mm strip length
  • ✓ Latching button switches the PSU on and off with no paperclip jumper
  • ✓ Separate stand-by and power-on LEDs show PSU state at a glance

Cons

  • ✗ Needs a separate ATX power supply; no PSU is included
  • ✗ Output voltages are set by the PSU; no adjustable rail is listed
  • ✗ No built-in voltmeter or current readout is listed
  • ✗ Built for ATX connectors only; not for vintage AT power supplies

Manufacturer description

The Electronics-Salon D-1188 ATX power supply breakout board turns a spare desktop PC power supply into a bench supply for electronics projects, retro hardware testing and prototyping. Plug your PSU's main cable into the standard 24-pin ATX connector. It also accepts 20-pin and 20+4-pin headers, so it works with both older and newer ATX units. Power is broken out to screw terminal blocks rated at 24A per position and 400V. The terminals have a 5.0mm (0.197") pitch and accept wire from 26AWG up to 12AWG (2.5mm2) with a 7mm strip length. That covers everything from thin jumper leads to…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Electronics-Salon D-1188 24/20-Pin ATX DC Power Supply Breakout…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies & cables category before committing. On the listing's own facts, the case for it is "Accepts 20, 20+4 and 24-pin ATX headers from most desktop PSUs"; the main trade-off is "Needs a separate ATX power supply; no PSU is included". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will the D-1188 work with my 20-pin or 24-pin ATX power supply?

Yes. The board has a standard 24-pin ATX connector and supports 20-pin, 20+4-pin and 24-pin wire headers, which covers most desktop ATX power supplies.

What wire sizes fit the screw terminals?

The terminal blocks accept wire from 26AWG up to 12AWG (2.5mm2), with a 7mm strip length. Terminal pitch is 5.0mm (0.197") and the screws are M3.

How much current can each terminal handle?

Each screw terminal position is rated at 24A and 400V. The current you can actually draw is still limited by your ATX power supply's rail ratings, so check your PSU's label.

Do I still need to short the green PS_ON wire to turn the PSU on?

No. The board has a latching button switch that turns the power supply on and off. Stand-by and power-on LEDs show whether the PSU is idling or fully running.

Can I use this with an old AT power supply for a retro PC?

No. The D-1188 is built around the ATX 20/24-pin connector. AT power supplies use different P8/P9 connectors and won't plug into this board.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Electronics-Salon 24/20-pins ATX DC Power Supply Breakout Board.
  • 24-pins Standard ATX Connector, support 20 / 20+4 / 24 pins wire header.
  • Stand-By and Power-ON indicator LEDs.
  • With latching button switch to control power ON/OFF.
  • High quality 24Amp(per position) screw terminal blocks.

Full Specifications

BrandElectronics-Salon
Wattage200 watts
Model NameD-1188
Form FactorATX
Model NumberMD-D1188-1
CompatibilitySwitch
Connector TypeATX
Cooling MethodAir
Output Wattage200 Watts
Mfr Part NumberMD-D1188-1
Compatible DevicesPersonal Computer
Maximum Input Voltage240 Volts
Minimum Input Voltage110 Volts (AC)
System Bus Connector TypeATX
Connector Type Used on CableATX

Ready to buy?

Electronics-Salon D-1188 24/20-Pin ATX DC Power Supply Breakout Board Module is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Power Supplies & Cables

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →