Skip to main content
JSER B+M Key Socket 2 M.2 NGFF (SATA) SSD to 2.5 SATA Adapter Card Adapter with Black Metal Case
JSER

JSER B+M Key Socket 2 M.2 NGFF (SATA) SSD to 2.5 SATA Adapter Card Adapter with Black Metal Case

Bottom line: The JSER B+M Key Socket 2 M.2 NGFF SSD to 2.5 SATA Adapter Card Adapter: Fits 2230, 2242, 2260 and 2280 M.2 SATA SSDs in one adapter; main trade-off: no NVMe or PCIe AHCI M.2 support, so many modern SSDs won't work.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ Fits 2230, 2242, 2260 and 2280 M.2 SATA SSDs in one adapter
  • ✓ SATA III at up to 6Gbps, backward compatible with 3.0 and 1.5Gbps
  • ✓ Metal shell helps dissipate heat and protects the board
  • ✓ No drivers or external power: works with Windows, Linux and Mac
  • ✓ Can host a boot drive in any standard 2.5-inch SATA bay

Cons

  • ✗ No NVMe or PCIe AHCI M.2 support, so many modern SSDs won't work
  • ✗ Doesn't accept mSATA SSDs or M.2 Wi-Fi and capture cards
  • ✗ SSD not included; you supply your own M.2 SATA drive
  • ✗ Speed tops out at SATA's 6Gbps limit, well below NVMe

Manufacturer description

Turn a spare M.2 SATA SSD into a standard 2.5-inch SATA drive with the JSER B+M Key M.2 NGFF to 2.5" SATA adapter. A slim black metal shell surrounds the board, so the finished unit fits where a regular 2.5-inch SSD would go, in a desktop or a laptop. The metal also helps carry heat away from the drive. The adapter accepts M.2 NGFF SSDs that use the SATA protocol in four lengths: 22x30mm, 22x42mm, 22x60mm and 22x80mm (2230, 2242, 2260 and 2280). It meets SATA Base Specification 3.0 and runs at up to 6Gbps, and it also works at 3.0Gbps and 1.5Gbps on older hosts. The adapter only changes the…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for JSER B+M Key Socket 2 M.2 NGFF SSD to 2.5 SATA Adapter Card Adapter, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the storage adapters category before committing. On the listing's own facts, the case for it is "Fits 2230, 2242, 2260 and 2280 M.2 SATA SSDs in one adapter"; the main trade-off is "No NVMe or PCIe AHCI M.2 support, so many modern SSDs won't work". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, match it to the drive and the host: the drive interface it takes (SATA, NVMe or other), the drive sizes it accepts, whether it powers a 3.5" drive (desktop drives need 12V, which a USB port alone does not supply), and the USB or PCIe generation of the port you will plug it into, which caps the transfer speed. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this adapter work with my NVMe M.2 SSD?

No. The JSER adapter only supports M.2 NGFF SSDs that run in SATA mode. It does not support NVMe, PCIe AHCI or M-key-only PCIe drives. Check your SSD's spec sheet for the SATA protocol before you buy.

What M.2 SSD sizes does it fit?

It accepts M.2 SATA SSDs in 22x30mm, 22x42mm, 22x60mm and 22x80mm lengths (2230, 2242, 2260 and 2280). The SSD is not included.

Can I use the adapted SSD as my boot drive?

Yes. The adapter only converts the connector to standard 2.5-inch SATA. You can install it in a desktop or laptop and run it as a system disk, with no extra software.

Does the adapter need drivers or external power?

No. It is plug-and-play on Windows 7, 8, 8.1, 10 and 11, Linux and Mac. It draws power from the SATA connection, so you don't need a separate power supply.

Will it slow down my M.2 SATA SSD?

No. The adapter meets SATA Base Specification 3.0 and runs at up to 6Gbps, falling back to 3.0Gbps or 1.5Gbps on older hosts. It does not change the drive's speed or other properties.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Does not support NVMe PCIE M-Key, M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs.
  • Soket 2 B key M.2 NGFF SSD(SATA transfer mode) to 2.5" SATA adapter; Adopts Metal shell, slim design, durable and excellent heat dissipation, be portable and easy to carry.
  • Support the 22*30 mm/22*42 mm/22*60 mm/22*80 mm size of M.2 NGFF SATA protocol SSD.; Note: SSD are not included.
  • Soket 2 B key M.2 NGFF SSD(SATA transfer mode) to 2.5" SATA adapter. Compatible Multi OS, Windows 7/ 8/ 8.1/ 10/ 11/ Linux/ MAC. Plug-and-play, no additional drivers required. Bus powered, does not need an external power supply.
  • High Speed: Offers a throughput of up to 6Gbps when used with SATA host and device, Compliant with SATA Base Specification 3.0; Which can be connected to an SSD solid state hard disk as a system disk, and supports transmission rates of 6.0Gbps, 3.0Gbps, 1.5Gbps. The speed and other properties is not changed,only form conversion interface; You can connect it to desktop or laptop; Transfer to the operating system and does not require any software drivers.

Full Specifications

BrandJSER
ColorBLACK
FinishMetallic
Unit Count1 Count
ConnectivityWiFi
Model Number8541663707
CompatibilityMac, Linux
Warranty TypeLimited
Connector TypeSATA
Item Dimensions3.94 x 3.94 x 0.39 inches
Mfr Part Number8541663707
Number of Items1
Number of Ports1
Power Plug TypeNo Plug
Compatible DevicesDesktop, Laptop
Smart Home CompatibilityNot Smart Home Compatible
Item dimensions L x W x H3.94 x 3.94 x 0.39 inches
Specific Uses For ProductDesktop, Laptop

Ready to buy?

JSER B+M Key Socket 2 M.2 NGFF (SATA) SSD to 2.5 SATA Adapter Card Adapter with Black Metal Case is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Storage Adapters

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →