MG Chemicals 835-PX2 Flux Pen Soldering, 2 x 10 mL, Amber
Bottom line: The MG Chemicals 835-PX2 Flux Pen Soldering ($15.61 on Amazon as of 2026-11-22 17:25 UTC): Type RA rosin flux meeting J-STD-004 Type ROM1, per MG Chemicals; main trade-off: rosin-based formula, not a no-clean or water-soluble flux.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-22. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ Type RA rosin flux meeting J-STD-004 Type ROM1, per MG Chemicals
- ✓ Rated for both leaded and lead-free solder chemistries
- ✓ Pen tip places flux precisely on pads and chip carriers
- ✓ Two 10 mL pens per pack, so a spare is always on hand
Cons
- ✗ Rosin-based formula, not a no-clean or water-soluble flux
- ✗ 10 mL per pen runs out quickly for high-volume work
- ✗ Pen tip is slow for fluxing large board areas
- ✗ Rosin residue may need cleanup for a tidy finished board
Manufacturer description
The MG Chemicals 835-PX2 Flux Pen twin pack gives you two 10 mL rosin flux pens for precise flux placement on printed circuit boards. Each pen holds MG Chemicals' 835 Type RA (rosin-activated) flux, made from pure water-white (WW) grade gum rosin in a solvent system with strong activators. MG Chemicals states it meets the J-STD-004 requirements for Type ROM1 flux. The flux works with both leaded and lead-free solder. You can use the same pen whether you are reflowing vintage tin-lead joints on a retro console board or doing lead-free rework on newer hardware. MG Chemicals lists fast wetting…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for MG Chemicals 835-PX2 Flux Pen Soldering, so this read rests on the manufacturer's listed specs and the current price in the tools & maintenance category (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. On the listing's own facts, the case for it is "Type RA rosin flux meeting J-STD-004 Type ROM1, per MG Chemicals"; the main trade-off is "Rosin-based formula, not a no-clean or water-soluble flux". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Does the MG Chemicals 835-PX2 flux pen work with lead-free solder?
Yes. MG Chemicals says the 835 flux works with both leaded and lead-free solder, so one pen covers vintage tin-lead rework and modern lead-free joints.
What type of flux is in the 835-P pen?
It is a Type RA (rosin-activated) flux made from pure water-white (WW) grade gum rosin. MG Chemicals states it meets the J-STD-004 requirements for Type ROM1 flux.
How much flux do you get in the 835-PX2 pack?
The pack contains two pens with 10 mL of flux each, 20 mL in total.
Is this flux pen good for PCB rework and retro console repair?
MG Chemicals designed the 835-P for precise flux placement in prototyping and rework/repair on printed circuit boards, including chip carriers. That fits retro console and vintage PC board repair.
Do I need to clean the flux residue after soldering?
MG Chemicals lists the 835 flux as non-corrosive and non-hygroscopic. Cleaning requirements depend on your application, so check the MG Chemicals technical data sheet for its residue and cleaning recommendations.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- For leaded and lead-free solder
- Fast wetting
- Non-corrosive
- Non-hygroscopic
- RoHS compliant
Full Specifications
| Brand | MG Chemicals |
|---|
Ready to buy?
MG Chemicals 835-PX2 Flux Pen Soldering, 2 x 10 mL, Amber is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-22. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- Qwen3 32B on Apple M4 Max vs M4 Pro: tok/s and Memory per Quant (2026)
- Home Assistant on a Raspberry Pi 4 8GB: 2026 Smart-Home Hub Build
- Best Budget Internal SSD for 2026: 5 Picks Tested by Value
- How to run Qwen 3 14B on AMD Radeon RX 7900 XTX
- Imaging Vintage IDE Drives in 2026: A CompactFlash + USB Adapter Workflow
- Can Local LLMs Actually Do Anything Useful?
- KOORUI vs Samsung Odyssey: Best 27-inch 4K Gaming Monitor in 2026
- Kingston 2GB DDR Modules: Identifying and Buying RAM for a 2004-Era Retro PC
- Sound Blaster X G6 on a Windows XP Retro Gaming PC: Worth It?
- Best Single-Board Computers for Home Lab in 2026
- Logitech G29 / G920 Not Detected on Windows 11: Step-by-Step Driver Fix Guide (2026)
- ATI Radeon 9700 Pro Install Guide: Catalyst Versions, AGP 8x Compatibility, and Period-Correct Drivers
- RTX 3060 12GB Local LLM Guide: Which Models Actually Fit (2026)
- Voodoo5 5500 PCI Boots on Modern ASUS P8Z77-V Pro — A Look at Retro GPUs in 2026 Boards
- Intel Arc Pro B60 24GB: AI Workstation GPU Guide 2025
- Best Controllers for Retro Gaming and Emulation in 2026
- The Budget Streaming Starter Kit: Mic, Light, and Webcam Under $250
- Building a Modern BYOC LAN Party Box: 8 Period-Correct Rigs for QuakeCon-Style Events in 2026
- Building a Period-Correct 2001 Win98 Rig With Parts You Can Still Buy
- Grok Imagine Video 1.5 Hits #2 — But Local Video Gen on an RTX 3060 Is Still Free
- Self-Host Jellyfin on the Raspberry Pi 4 8GB: Transcoding Limits
- Flux.2-Klein Pipeline: Real-Time Webcam AI at 30 FPS
- Core i7-9700K vs Ryzen 7 5800X for 1440p Gaming in 2026
- Best Logitech Gaming Gear in 2026: Mice, Keyboards, and Wheels
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090