Custom Cable Connection 18 Inch BNC Male to BNC Male Times Microwave LMR-240 Ultraflex 4Ghz 50 Ohm Antenna Cable
Bottom line: Per its Amazon listing, the Custom Cable Connection 18 Inch BNC Male to BNC Male Times Microwave: times Microwave LMR240 4ghz VSWR 1.25 Cable.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Times Microwave LMR240 4ghz VSWR 1.25 Cable
- ✓ Backed by Custom Cable Connection's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Times Microwave LMR 240 Ultraflex BNC Male to BNC Male coaxial cables are designed for typical use in production, laboratory test and measurement, defense / military, aerial antenna towers, radio, antenna and interconnect with RF components. This LMR 240 Ultraflex BNC Male Cable assembly uses a 50 Ohm BNC male connector on both ends and has a 50 Ohm impedance for the cable.Assembled in USAConnectors: Amphenol RF 112533Times Microwave LMR240 4ghz VSWR 1.25 Cable50 Ohm ImpedanceOnce you have used LMR240 UltraFlex you will never go back to stiff cable.* LMR is a trademark of Times Microwave…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Custom Cable Connection 18 Inch BNC Male to BNC Male Times Microwave…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro crt & display accessories category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Times Microwave LMR 240 Ultraflex BNC Male to BNc Male coaxial cables are designed for typical use in production, laboratory test and measurement, defense / military, aerial antenna towers, radio, antenna and interconnect with RF components.
- This LMR 240 Ultraflex BNC Male Cable assembly uses a 50 Ohm BNC male connector on both ends and has a 50 Ohm impedance for the cable.
- Times Microwave LMR240 4ghz VSWR 1.25 Cable
- Assembled in Dallas, Texas
- Once you have used LMR240 UltraFlex you will never go back to stiff cable.
Full Specifications
| Brand | Custom Cable Connection |
|---|---|
| Color | Black |
| Model | 8541741545 |
| Cable Type | Coaxial |
| Item Shape | Round |
| Unit Count | 1 Count |
| Part Number | 112931-1.5C |
| Connector Type | Coaxial |
| Connector Gender | Male |
| Data Transfer Rate | 4 gigabits_per_second |
| Indoor Outdoor Usage | Indoor, Outdoor |
Ready to buy?
Custom Cable Connection 18 Inch BNC Male to BNC Male Times Microwave LMR-240 Ultraflex 4Ghz 50 Ohm Antenna Cable is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CRT & Display Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Lossless Scaling on Steam Deck: Is It Worth It?
- Voodoo3 3500 TV on Windows 98 SE: AI-Assisted Driver Install Walkthrough in 2026
- CompactFlash as a Win98 Boot Drive: The 2026 Setup Guide
- AutomationBench Cost Gap: What DeepSeek V4's 5-Cent Task Means for Local Agent Rigs
- Best IDE & CompactFlash to USB Adapters for Retro PCs 2026
- Best PC Couch-Gaming Setup in 2026: Controllers, Display, and Audio
- VRAM calculator: what can you actually run on your GPU?
- Intel i7-9700K vs Ryzen 7 5700X for 1080p Gaming (2026)
- Kimi-Dev-72B Local Coding Benchmarks: VRAM Required, Tok/s, and How It Stacks Against DeepSeek V4 and…
- Logitech G502 Hero vs HyperX QuadCast 2 S vs Elgato Cam Link 4K: Building a Sub-$300 Streaming Starter Kit
- Best USB Microphone for Streaming in 2026
- Can a Ryzen 5 5600G Run Local LLMs With No GPU? CPU + iGPU Inference Tested
- Best IDE-to-USB Adapter for Retro PC Data Recovery: FIDECO vs Unitek vs Vantec
- Best Quiet PC Cooling Upgrades in 2026
- GPT-5.6 Sol Matches Fable 5 at 1/3 Cost: Local-Rig Fallout
- RTX 4080M Desktop Build: 100W Gaming vs. RX 9070 GRE
- Revive a Dead Payphone with a Raspberry Pi Zero 2 W: Full Build Walkthrough
- Best Controller for Raspberry Pi Retro Gaming and Emulation in 2026
- Jellyfin on a Ryzen 5 5600G: 4K Transcoding on a $400 Mini-Server (2026)
- Qwen 3.6 35B-A3B on RTX Spark: Which Surface Laptop Ultra Memory Config to Buy
- Sound Blaster AWE64 vs Aureal Vortex 2: The Win98 Audio API War, Revisited
- Running Local LLMs on a Raspberry Pi 4 8GB: tok/s, Quantization, and What Actually Works
- Build a Silent Home NAS on a Raspberry Pi 4 8GB With a SATA SSD (2026)
- Building a Period-Correct 2002 GeForce 4 Ti + Pentium 4 Northwood Win98/XP Dual-Boot
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090