uxcell 25W 6 Ohm 5% Aluminum Housing Resistor Screw Tap Chassis Mounted Aluminum Case Wirewound Resistor Load Resistors Gold Tone 2 pcs
Bottom line: The uxcell 25W 6 Ohm 5% Aluminum Housing Resistor Screw Tap Chassis is a specs-and-price decision rather than a crowd-consensus one in the power supplies & cables category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Backed by uxcell's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored uxcell 25W 6 Ohm 5% Aluminum Housing Resistor Screw Tap Chassis… using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies & cables category. uxcell's power supplies & cables lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 25 Watt and 6 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
- Aluminum Housed. An insulated cover on the wounded wires would suppress the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
- This 25W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
- Board length 1.1 inches(28mm) with two 3.5mm mounting hole, and 2 terminals for a connection.
- Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
Full Specifications
| Brand | uxcell |
|---|---|
| Wattage | 25 watts |
| Model Name | a18032700ux0071 |
| Form Factor | SFX12V |
| Model Number | a18032700ux0071 |
| Connector Type | ATX |
| Cooling Method | Air |
| Output Wattage | 25 Watts |
| Mfr Part Number | a18032700ux0071 |
| Compatible Devices | Personal Computer |
| Connector Quantity | 2 |
| Number of Connectors | 2 |
| Minimum Input Voltage | 100 Volts (AC) |
| System Bus Connector Type | 20+4 Pin |
| Connector Type Used on Cable | ATX |
Ready to buy?
uxcell 25W 6 Ohm 5% Aluminum Housing Resistor Screw Tap Chassis Mounted Aluminum Case Wirewound Resistor Load Resistors Gold Tone 2 pcs is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Best Raspberry Pi for a Retro Console Build in 2026: Pi 4 8GB vs Pi Zero 2 W
- Sound Blaster Audigy 2 ZS vs Audigy FX for Windows XP Gaming (2026)
- Handheld Gaming PC Comparison: 2024's Top Picks
- Modern Sound Cards on Retro Rigs: The Sound BlasterX G6 for Win9x and DOS Audio
- RTX 3060 12GB vs Ryzen 9 3900X for Qwen2.5 14B: GPU or CPU in 2026?
- Best Budget Gaming Monitor in 2026: 5 Picks From 1440p to 4K
- DGX Spark vs Mac Studio M3 Ultra: Which AI Dev Machine Wins in 2026?
- Best Single-Board Computer Kits for Beginners (2026)
- Microsoft's Copilot Super App vs a Local RTX 3060 Ollama Box in 2026
- Radeon Pro W7900 48GB vs RTX A6000 48GB for Local 70B Inference (2026)
- PFlash on a Single RTX 3090: 10× Prefill Speedup at 128K Context vs llama.cpp
- Best CPU for Streaming and Gaming Under $300 (2026)
- Best Sim Racing Gear for Beginners in 2026
- Microsoft + Nvidia Agent PCs: Hardware to Run Agents Locally
- Do Wireless Keyboards Work in BIOS? Building a Homelab Crash Cart in 2026
- Building a Period-Correct 1998 Voodoo2 SLI Win98 Gaming PC in 2026: Parts, Boot Media, and Glide Setup
- Best USB Microphone and Streaming Kit for Creators in 2026
- Best Budget Gaming Keyboard Under $50 in 2026
- Best SSD for a Raspberry Pi 5 Boot Drive in 2026
- Can You Game While Ollama Runs? RTX 3060 12GB VRAM Contention
- Best Budget SSDs for Retro and Homelab Builds in 2026
- First-Time CPU Delidding: What to Expect and How to Get It Right
- Best Steam Deck Accessories in 2026: Docks, Audio, Controllers, and Storage
- Raspberry Pi Home Automation Projects: A 2025 Starter Guide
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090