Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-30" X 72" (2.5'x 6')
Bottom line: Per its Amazon listing, the Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-30" X 72": top layer Static-“Dissipative Layer” ( 0.5mm thickness ); bottom Layer Conductive layer (1.5mm thickness).
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Top layer Static-“Dissipative Layer” ( 0.5mm thickness )
- ✓ Backed by Scientific Americas's warranty and support channels
Cons
- ✗ Check battery runtime and RPM/CFM specs match your case size and cleaning frequency
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
30" X 72'' With 2 MM Thickness, Durable and high quality ESD mat have superior heat-, chemical-, and wear-resistance. Feature two layers rubber; the top layer is dissipative and the bottom layer is conductive. Available in Gray. Dual Bench Ground Mount for Single Conductor Wrist Straps. This is a good complement to our mat grounding cord as it will install under the work bench and provide long term solution. It also provides more workable surface area ( the mat grounding usually is mounted on the corner, top left or right of the mat).
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-30" X 72", so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Durable and high quality ESD mat have superior heat-, chemical-, and wear-resistance
- Top layer Static-“Dissipative Layer” ( 0.5mm thickness )
- Bottom Layer Conductive layer (1.5mm thickness)
- Resistance: RTT:3.8 x 10^6 to 1 x 10^8, RTG:2.4 x 10^7 to 1x 10^8, Surface:<10^4 to <10^7
- Heat resistance (600oF, 10 sec no smell, no melt)
Full Specifications
| Brand | Scientific Americas |
|---|---|
| Color | Grey |
| Shape | Rectangular |
| Pattern | Solid |
| Material | Plastic |
| Resistance | RTT:3.8 x 10^6 to 1 x 10^8, RTG:2.4 x 10^7 to 1x 10^8, Surface:<10^4 to <10^7 |
| Unit Count | 1 Count |
| Model Number | KG-H2Z0-H85K |
| Material Type | Plastic |
| Item Thickness | 2 millimeters |
| Item Type Name | Mat |
| Number of Items | 1 |
| Special Feature | Durable |
| Additional Features | Durable |
| Included Components | Mat |
| Manufacturer Part Number | 2050-30X72RB |
| Product Care Instructions | Wipe with Damp Cloth, Vacuum, General Cleaning Methods |
| Item Dimensions L x W x Thickness | 72"L x 0.08"Th |
| Full listing title | Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-30" X 72" (2.5'x 6') - 0.08" Thick- with Dual Bench and Wrist Strap-Gray |
Ready to buy?
Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-30" X 72" (2.5'x 6') - 0.08" Thick- with Dual Bench and Wrist Strap-Gray is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- HiDream-O1-Image on an RTX 3060 12GB: Does It Fit?
- GameSir G7 SE vs 8BitDo Pro 2 vs DualSense for PC
- Best Parts for a Long-Context Local LLM Workstation in 2026
- 3dfx Voodoo2 SLI on Windows 98 SE: Period-Correct Build, Glide Driver Setup, and Real Quake 3 Benchmarks
- Ryzen 7 9800X3D vs 7800X3D upgrade guide
- KOORUI 27" 4K vs Samsung Odyssey 27" 4K for PS5 and PC Gaming
- ComfyUI on an RTX 3060 12GB: Flux and SDXL Speeds in 2026
- How Creative Killed Aureal: The 1999 Patent War, Audigy's Lineage, and Why Consumer PC Audio Stagnated for…
- KOORUI 4K QD-Mini LED vs Samsung Odyssey 4K: Best Budget 4K Gaming Monitor in 2026?
- Best Single-Board Computer Project Kits for Beginners (2026)
- Open-Source NVK Adds DLSS: What RTX 3060 Owners Get
- Running GLM-5.2 Locally on an RTX 3060: Ollama VRAM + tok/s
- PebbleOS Comes to the Raspberry Pi RP2350: What the Port Means for Tinkerers
- Best Cooler for a Ryzen 7 5800X: Noctua NH-U12S vs CoolerMaster ML240L
- Can a Raspberry Pi Zero W Run a Local LLM in 2026? A Tiny-Model Reality Check
- Imaging a Vintage IDE Drive to CompactFlash for a Silent Win98 Boot
- Best 1440p Gaming Monitor for an RTX 3060: ASUS TUF 2K vs KOORUI 4K
- Best Controller for Retro Emulation on PC: 8BitDo Pro 2 vs GameSir G7 SE
- Best Gaming Monitors for Console and PC in 2026
- Hands-On: Asus ROG Harpe II Extreme Edition 20 Gaming Mouse
- SNES Classic vs Sega Genesis Mini: Best Plug-and-Play Retro Console in 2026
- Best Streaming and Podcasting Gear for 2026: 5 Picks for Mic, Light, and Monitoring
- Secluso: Private DIY Home Security on a Raspberry Pi 4
- Best Gaming PC Build Components for 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090