WMYCONGCONG 5 PCS Joystick Breakout Module Game Controller
Bottom line: The WMYCONGCONG 5 PCS Joystick Breakout Module Game Controller is a specs-and-price decision rather than a crowd-consensus one in the single board computers category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Backed by WMYCONGCONG's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Specification:Joystick Breakout Module:DO port for digital output, AO port for analog output.Size: 37 x 25 x 32mm/1.46 x 0.98 x 1.26inchWeight: 15 gConnector: +5Vcc - GND - VRx - VRy - SWMaterial: ABS plasticGame joystick module suits for Arduino PS2 , connects to two analog inputs, the robot is at your commands with X,Y control.It also has a switch that is connected to a digital pin, convenient to use.Breadboard Wires Jumper Wires:40-pin male to female jumper wires40-pin male to male jumper wires40-pin female to female jumper wiresEach Cable Length: Approx. 200mm/7.87inchGreat accessories…
SpecPicks Verdict
SpecPicks scored WMYCONGCONG 5 PCS Joystick Breakout Module Game Controller using a rating × review-volume × price-fit model applied to published specs and reviews across the single board computers category. WMYCONGCONG's single board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for single board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Game joystick module compatible with Arduino PS2, electronic building blocks standard connector with 2.54mm pin.
- DO port for digital output, AO port for analog output; Bi-directional 10 k resistor, the resistance changes with the rocker in a different direction.
- Module uses 5V power supply, the original state of X, Y read voltage of 2.5 V. When pressing at the arrow direction, voltage increases, maximum is 5 v, at opposite direction of the arrow, the voltage value decreases, minimum is 0 v.
- Jumper wires kit, compatible with 2.54mm spacing pin headers, great for Arduino PCB project, pc motherboard.
- Package include: 5 * joystick module(NOT designed for high current applications.) + 120 * ribbon Cables Kit(including male to male, male to female, female to female).
Full Specifications
| Brand | WMYCONGCONG |
|---|---|
| Model Name | 8542140575 |
| Unit Count | 5 Count |
| Model Number | 8542140575 |
| Compatibility | PC |
| Built-In Media | 5 Joystick Modules and 120 Ribbon Cables Kit containing 40 male-to-male, 40 male-to-female, and 40 female-to-female cables |
| Mfr Part Number | WGCD |
| Package include | 5 * joystick module(NOT designed for high current applications.) + 120 * ribbon Cables Kit(including male to male, male to female, female to female). |
| Processor Count | 1 |
| Compatible Devices | Arduino, PS2 |
| Included Components | 5 Joystick Modules and 120 Ribbon Cables Kit containing 40 male-to-male, 40 male-to-female, and 40 female-to-female cables |
| Connectivity Technology | GPIO |
| Item Dimensions L x W x H | 1.46"L x 0.98"W x 1.26"H |
| Full listing title | WMYCONGCONG 5 PCS Joystick Breakout Module Game Controller for Arduino PS2 + 120 PCS Multicolored Breadboard Jumper Wires Ribbon Cables Kit |
Hardware benchmark data
Ready to buy?
WMYCONGCONG 5 PCS Joystick Breakout Module Game Controller for Arduino PS2 + 120 PCS Multicolored Breadboard Jumper Wires Ribbon Cables Kit is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Single Board Computers
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Best AM4 CPU for Gaming in 2026: 5 Ranked Picks
- Ryzen CPU Deals 2026: 5600X, 5800X3D and 9800X3D Price Lines
- Qwen 3.6 27B on a 12GB RTX 3060: Which Quant Actually Fits?
- Linux Gaming Keeps Getting Faster: Windows APIs Land in the Kernel
- Panther Lake NPU vs RTX 3060 12GB for Local LLM Inference
- Windows XP on Steam Deck: Retro Setup Guide
- Best Budget Internal SSD for 2026: 5 Picks Tested by Value
- RTX 3060 12GB vs Ryzen 7 5800X for Qwen3 14B Local Inference (2026)
- Blue Yeti vs HyperX QuadCast 2 S: Best Streaming Mic Under $200
- Best Streaming Starter Kit for New Creators in 2026
- Best Streaming Kit for New Creators in 2026
- Building a Period-Correct Windows 98 Gaming PC in 2026: Parts, Pitfalls, and Driver Archaeology
- International Women in Engineering Day 2026: A Beginner's Pi Starting Point
- Best Budget PC Upgrades Under $200 in 2026: 5 Picks That Move the Needle
- Dump and Archive Your Retro PC's IDE Drives in 2026: A USB Adapter Workflow
- Best GPU for Gaming in 2026: Our Top 5 Picks Tested
- Qwen 35B-A3B on a 12GB RTX 3060 with llama.cpp: Setup and Measured Speed
- Anthropic's 2GW AMD Deal: What It Means for Local-vs-Cloud Builders
- Best Budget 1TB SATA SSD 2026: BX500 vs WD Blue vs SanDisk Ultra 3D vs Samsung 870 EVO
- Best NVMe SSD for a Compact Gaming PC: WD_BLACK SN770 in 2026
- Logitech G502 Hero in 2026: Is the FPS Mouse King Still Worth It?
- Authentic Retro PC Audio in 2026: Sound BlasterX G6 vs Vintage AWE64 and Audigy
- RTX 5070 Ti vs RTX 5090 for Local LLMs: 16GB vs 32GB
- Period-Correct Sound for a Modern Retro PC: The Sound Blaster G6 and the EAX Legacy
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090