Skip to main content
A+ ELECTRIC Cord Cover Full Kit, 26ft/315in Self-Adhesive Cable Raceway, 20 Snap-On Channels, Wire Hider for TV, HDMI & Speaker Cables, Includes Connectors & Corners, Paintable Cable Management, White
A+ ELECTRIC

A+ ELECTRIC Cord Cover Full Kit

Bottom line: The A+ ELECTRIC Cord Cover Full Kit ($23.74 on Amazon as of 2026-11-20 17:23 UTC): 26ft/315in total run: about 2x the length of standard 10-13ft kits; main trade-off: rigid channel adds visible surface depth: not flush like in-wall routing.

$23.74 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ 26ft/315in total run: about 2x the length of standard 10-13ft kits
  • ✓ Complete connector set: 20 straight, 3 inside, 3 outside, 3 T corners
  • ✓ Each 16in channel fits 4-5 cables: power, HDMI, Ethernet, speaker wire
  • ✓ Dual mounting: pre-applied adhesive backing plus included screws and anchors

Cons

  • ✗ Rigid channel adds visible surface depth: not flush like in-wall routing
  • ✗ Paint is a separate purchase if you want an exact wall-color match
  • ✗ White only: no black or wood-tone option for dark walls or trim
  • ✗ Adhesive removal needs a hair dryer to avoid pulling paint off drywall

Manufacturer description

The A+ ELECTRIC Cord Cover Full Kit gives you 26 feet of cable raceway in a single box, which is roughly double what a typical 10-to-13-foot kit ships with. You get 20 self-adhesive channels at 16 inches each, plus 20 straight connectors, 3 inside corners, 3 outside corners, 3 T connectors, and screws and anchors for a mechanical hold when adhesive alone is not enough. Each channel takes four to five cables, so a mounted TV's power cord, HDMI, Ethernet, and speaker wire fit in one run with room left over. Installation is peel-and-press: strip the backing, set the channel on the wall, route…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for A+ ELECTRIC Cord Cover Full Kit, so this read rests on the manufacturer's listed specs and the current price in the rgb & lighting category (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. On the listing's own facts, the case for it is "26ft/315in total run: about 2x the length of standard 10-13ft kits"; the main trade-off is "Rigid channel adds visible surface depth: not flush like in-wall routing". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

How much wall length does this kit actually cover?

26 feet, or 315 inches total. That comes from 20 channels at 16 inches each, plus straight connectors to join them into continuous runs.

How many cables fit inside one channel?

Four to five typical cables. The manufacturer lists power cords, HDMI, Ethernet, and speaker wire as the intended bundle, with room to spare.

Can I paint it to match my wall?

Yes. The smooth white surface accepts standard wall paint. Most buyers leave it white, since white blends with the majority of interior walls as-is.

Will it damage my wall when I take it down?

A+ ELECTRIC says gentle warm air from a hair dryer softens the adhesive bond so a section peels off without wall damage. Results vary with paint age and finish.

Do I have to use the adhesive, or can I screw it in?

Either. Every channel ships with self-adhesive backing, and the kit also includes screws and anchors for a stronger mechanical hold.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • CLICK! YOU WILL LOVE IT: The snap-fit cover locks on with one confident press. That satisfying click is how you know the channel is sealed tight. Pop it off just as easily whenever you need to add, remove, or swap a cable. No jamming, no cracking, no tools. Just open, route, click, done.
  • THE ONLY KIT YOU NEED FOR THE WHOLE ROOM: Most cord hider kits run out at 10 to 13 feet, leaving you short and frustrated. This 315 inch cable hider includes 20 self-adhesive channels, each 16 inches long, that connect piece by piece like Tetris blocks. Straight connectors, inside corners, outside corners, and T connectors lock everything together to fit any wall layout. One cable management kit, one purchase, nothing else to buy.
  • PEEL, PRESS, DONE: Each cord cover channel comes ready to install right out of the box. Peel the backing, press to your wall, move on. Need a stronger hold? Screws and anchors are included too. You pick the method, we provide both.
  • RENTER AND HOMEOWNER FRIENDLY, BUILT TO LAST: This A+ cable concealer is made to serve your home for years. The adhesive holds channels firmly in place and the material will not yellow or warp over time. If you ever need to remove a section, gentle warm air from a hair dryer softens the bond and lets you peel it off without damaging your wall.
  • EVERYTHING IN ONE BOX: 20 channels, 20 straight connectors, 3 inside corners, 3 outside corners, 3 T connectors, screws, and anchors. Not a cheap plastic strip. A complete wire hider solution engineered for real homes and real cable management needs.
  • FITS 4 TO 5 CABLES: Each channel comfortably holds your typical cord bundle including power cables, HDMI, Ethernet, and speaker wire with room to spare. Wide enough for real setups, slim enough to stay low profile on your wall. Already trusted in hundreds of thousands of American homes.

Full Specifications

BrandA+ ELECTRIC
ColorWhite
Style315" Full Kit for 3-4 Cables
MaterialPolyvinyl Chloride
Style Name315" Full Kit for 3-4 Cables
Unit Count26 Feet
Model NumberFULL-KIT-CORD-HIDER
CompatibilitySwitch
Mfr Part Numberyun--199
Number of Pieces20
Installation TypePeel & Stick Tape (Pre-Applied) + Optional Screws Included
Enclosure MaterialPolyvinyl Chloride
Indoor Outdoor UsageIndoor, Outdoor
Warranty Description2 Year Manufacturer Warranty
Item Dimensions L x W315"L x 1"W
Global Trade Identification Number08681925735844
Full listing titleA+ ELECTRIC Cord Cover Full Kit, 26ft/315in Self-Adhesive Cable Raceway, 20 Snap-On Channels, Wire Hider for TV, HDMI & Speaker Cables, Includes Connectors & Corners, Paintable Cable Management, White

Ready to buy?

A+ ELECTRIC Cord Cover Full Kit, 26ft/315in Self-Adhesive Cable Raceway, 20 Snap-On Channels, Wire Hider for TV, HDMI & Speaker Cables, Includes Connectors & Corners, Paintable Cable Management, White is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $23.74

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related RGB & Lighting

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →