ALITOVE 12V Power Supply 10A 120W AC Adapter 100-240V 50-60HZ Transformer AC to DC Converter 12 Volt 10 Amp with 5.5x2.5mm Output Jack for 5050 3528 LED Strip Light CCTV Cameras 3D Printer
Bottom line: The ALITOVE 12V Power Supply 10A 120W AC Adapter 100-240V 50-60HZ: Full 120W headroom at 12V 10A powers long 5050/3528 LED runs; main trade-off: indoor use only, so no outdoor camera or sign installs.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Full 120W headroom at 12V 10A powers long 5050/3528 LED runs
- ✓ 5.5x2.5mm barrel also fits 5.5x2.1mm jacks, no adapter needed
- ✓ Four-way protection: overload, overvoltage, thermal, short circuit
- ✓ 100-240V 50/60Hz input works on both US and EU mains
Cons
- ✗ Indoor use only, so no outdoor camera or sign installs
- ✗ Vendor advises 8A continuous, cutting usable output to ~96W
- ✗ Barrel jack only, no screw terminals for hardwired LED runs
- ✗ No listed voltage adjustment for devices needing trimmed 12V
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for ALITOVE 12V Power Supply 10A 120W AC Adapter 100-240V 50-60HZ…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies & cables category before committing. On the listing's own facts, the case for it is "Full 120W headroom at 12V 10A powers long 5050/3528 LED runs"; the main trade-off is "Indoor use only, so no outdoor camera or sign installs". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Important Note: 1. Before purchasing, please check whether the working voltage of your device is 12V and the current is not greater than 10A; 2. Check whether the DC connector is the same size as the product (5.5mm*2.5mm or 2.1mm, please see the picture for details)
- Input: 100V-240V 50/60Hz; Output: DC 12V 10A 120W max; Output adaptor jack size: 5.5mm x 2.5mm, compatible with 5.5mm x 2.1mm.
- Safety features: Automatic overload cut-off, over Voltage cut-off, automatic thermal cut-off, short circuit protection.
- Voltage consistency: There is no voltage fluctuations at power on, during transmit, receive, or at power off. It will protect your electronic products from destruction.
- Works with all devices that draw less than 10A, such as 1A, 2A, 3A,4A, 5A, 6A, 7A, 7.5A, 8A, 9A,10A,etc. We recommend to use 80% (8A) of the full load.
- Great for LED Strips, 3D Printer, ham radio transceiver, CCTV cameras, car subwoofer amp, audio amplifier, wireless router, ADSL Cats, HUB, audio/ video power supply. Indoor use only!
Full Specifications
| Brand | ALITOVE |
|---|---|
| Color | Black |
| Input | 100V-240V 50/60Hz; Output: DC 12V 10A 120W max; Output adaptor jack size: 5.5mm x 2.5mm, compatible with 5.5mm x 2.1mm. |
| Current | AC to DC |
| Wattage | 120 watts |
| Amperage | 10 A |
| Plug Type | Barrel Connector |
| Power Plug | Type B - 3 pin (North American) |
| Unit Count | 1 Count |
| Connectivity | Wireless |
| Model Number | J200-12010000D |
| Power Source | Corded Electric |
| Input Voltage | 110 volts_of_alternating_current |
| Mounting Type | Wall Mount |
| Built-In Media | 1x 12V 10A power supply adapter, 1x power cable |
| Connector Type | Barrel Connector 5.5mm x 2.5mm |
| Output Current | 10 A |
| Output Voltage | 12 volts_of_direct_current |
| Connection Type | Wireless |
| Frequency Range | 50 - 60 hertz |
Ready to buy?
ALITOVE 12V Power Supply 10A 120W AC Adapter 100-240V 50-60HZ Transformer AC to DC Converter 12 Volt 10 Amp with 5.5x2.5mm Output Jack for 5050 3528 LED Strip Light CCTV Cameras 3D Printer is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Best AMD CPUs for Gaming in 2026: Top Ryzen Picks
- Best Budget Internal SSD for 2026: 5 Picks Tested by Value
- Rescue a Dying Vintage IDE Drive by Cloning It to CompactFlash
- SATA/IDE to USB Adapters in 2026: FIDECO vs Unitek vs Vantec for Retro PC Data Recovery
- Best SSD for a Steam Deck or ROG Ally Upgrade (2026)
- Dell Precision 3660 vs Lenovo ThinkStation P3 Tower for Local LLMs (2026)
- Stable Diffusion WebUI Forge on an RTX 3060 12GB: Setup and Real Throughput
- Microsoft Mirage Adds Persistent Spatial Memory: Can a 12GB GPU Run Local Video Gen?
- How to run Llama 3.1 8B on Apple M4 Max
- Host a Quake 3 + UT99 LAN Server on a Raspberry Pi 4 in 2026
- How to run Qwen 3 32B on Apple M3 Ultra
- Kimi K2.7 Code: 12x Cheaper Than GPT-5.5, But Can You Run It Locally?
- AI-Driven Win98 Voodoo3 Driver Recovery on a Raspberry Pi 5 Companion
- OpenAI and Broadcom Unveil 'Jalapeño' Inference Chip
- Cut AI API Bills: Run Local LLMs on an RTX 3060 12GB (2026)
- Did Anyone Actually Ditch iCloud or Google One for Self-Hosting?
- Flux.2-Klein Pipeline: Real-Time Webcam AI at 30 FPS
- Is the RTX 3060 12GB Still Worth It for 1080p and 1440p Gaming in 2026?
- When Does a Homelab Become a Job?
- Crucial BX500 vs Samsung 870 EVO: Best 1TB SATA SSD for Game Storage
- Logitech G502 Hero in 2026: Is the $40 Classic Still the Mouse to Beat?
- Cosmos3-Super on an RTX 3060 12GB: Can the #1 Open-Weights Image Model Run Local?
- Voodoo3 3000 vs GeForce 256: 1999 Glide vs OpenGL Showdown
- Best Budget Gaming Headset Under $60: Turtle Beach Recon 50 vs BERIBES vs TAGRY
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090