Skip to main content
SJ@JX Arcade DIY Kit LED USB Encoder Board Zero Delay Arcade Controller Joystick Button Fight Stick Raspberry Pi Retro Pie MAME 5V LED Power
SJ@JX

SJ@JX Arcade DIY Kit LED USB Encoder Board Zero Delay Arcade Controller Joystick Button Fight Stick Raspberry Pi Retro Pie MAME 5V LED Power

Bottom line: The SJ@JX Arcade DIY Kit LED USB Encoder Board Zero Delay Arcade ($21.99 on Amazon as of 2026-11-20 13:50 UTC): Zero-delay USB encoder, no driver install on Windows, Raspberry Pi, RetroPie or MAME; main trade-off: no joystick, buttons or enclosure included, only the encoder and cables.

$21.99 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For PC and console controllers, synthesises manufacturer specs and independent reviews rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ Zero-delay USB encoder, no driver install on Windows, Raspberry Pi, RetroPie or MAME
  • ✓ Ships with 5V LED power cable so lit buttons wire up without a separate PSU
  • ✓ Sanwa-style red kit includes 26 2.8mm 2-pin leads for switch and LED buttons
  • ✓ Happ-style blue kit uses 4.8mm leads for 4 joystick and 13 button connections

Cons

  • ✗ No joystick, buttons or enclosure included, only the encoder and cables
  • ✗ Two connector sizes (4.8mm Happ vs 2.8mm Sanwa) make ordering the wrong variant easy
  • ✗ Listing does not state warranty terms or a return window
  • ✗ Small 92-review sample gives limited long-term reliability signal

Manufacturer description

Packing IncludesBlue(Happ)1 x Encoder board1 x USB cable4 x 2pin cable for joystick 4.8mm13 x 2pin cable for mirco switch button 4.8mm13 x 2pin cable for button LED power 5V 6.8mmRed(Sanwa)1 x Encoder board1 x USB cable1 x 5pin cable for joystick 2.8mm26 x 2pin cable for mirco switch LED button 2.8mm

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for SJ@JX Arcade DIY Kit LED USB Encoder Board Zero Delay Arcade…, so this read rests on the manufacturer's listed specs and the current price in the controllers & gamepads category (how we evaluate). Compare with similarly-priced alternatives in the controllers & gamepads category before committing. On the listing's own facts, the case for it is "Zero-delay USB encoder, no driver install on Windows, Raspberry Pi, RetroPie or MAME"; the main trade-off is "No joystick, buttons or enclosure included, only the encoder and cables". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Zero delay arcade game USB encoder board by SJ@JX.
  • Perfect fit for SANWA style Button and Joystick.
  • Power 5V supply and cable, making LED assembly very simple!
  • Suitable for Raspberry Pi, Retropie, MAME and all windows systems!
  • Suitable for Raspberry Pi, Retropie, MAME and all windows systems!

Full Specifications

BrandSJ@JX
ColorHapp
ConnectivityUSB
Power SourceCorded Electric,Usb Cable
Button Quantity16
Controller TypeJoystick
Hardware Platformpc
Compatible DevicesWindows
Additional FeaturesLED Lighting, Zero Delay
Connectivity TechnologyUSB
Manufacturer Part Number1123 happ

Ready to buy?

SJ@JX Arcade DIY Kit LED USB Encoder Board Zero Delay Arcade Controller Joystick Button Fight Stick Raspberry Pi Retro Pie MAME 5V LED Power is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $21.99

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related Controllers & Gamepads

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →