DEVMO 5PCS Joystick Breakout Module Shield PS2 Joystick Game Controller Compatible with Ar-duino
Bottom line: Per its Amazon listing, the DEVMO 5PCS Joystick Breakout Module Shield PS2 Joystick Game: Module uses 5V power supply, the original state of X, Y read voltage of 2.5 V.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ DO port for digital output, AO port for analog output.
- ✓ Backed by DEVMO's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
- Brand New- This is a high quality 2-Axis Joystick Module for Ar-duino- The module is an ideal addition to your next Ar-duino science project or prototype- 2-Axis analogue control + Digital Select button- High quality mechanical parts and switch- Ergonomic cap- IO Headers- Four Mounting holes- DS18B20 temperature sensor interfaceSpecification- Operating voltage 5v- Length 3.9 cm- Width 3.3 cm- Interface: Digital & Analog
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for DEVMO 5PCS Joystick Breakout Module Shield PS2 Joystick Game…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the joysticks & game port category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Game joystick module for Ar-duino PS2, electronic building blocks standard connector with 2.54mm pin.
- DO port for digital output, AO port for analog output.
- Module uses 5V power supply, the original state of X, Y read voltage of 2.5 V. When pressing at the arrow direction, voltage increases, maximum is 5 v, at opposite direction of the arrow, the voltage value decreases, minimum is 0 v.
- Directional Movements: two 10k metal rocker potentiometers
- Package Includes:5pcs XY joystick module.
Full Specifications
| Brand | DEVMO |
|---|---|
| Style | Modern |
| Material | Metal |
| Style Name | Modern |
| Output Type | mixed |
| Material Type | Metal |
| Mounting Type | Mounting Holes |
| Package Includes | 5pcs XY joystick module. |
| Maximum Supply Voltage | 5 Volts |
| Smart Home Compatibility | Not Smart Home Compatible |
| Directional Movements | two 10k metal rocker potentiometers |
| Specific Uses For Product | DIY electronics, prototyping, science projects, gaming |
Ready to buy?
DEVMO 5PCS Joystick Breakout Module Shield PS2 Joystick Game Controller Compatible with Ar-duino is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Joysticks & Game Port
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Automated Cabinet Lighting With a Raspberry Pi: Build Guide
- Best Budget 4K Gaming Monitor for an RTX 3060: KOORUI vs Samsung Odyssey
- The Best Retro Game Emulators for Mac in 2026
- What Rig Runs an AI Agent Locally? Building for the Agent Era
- Best Controller for Raspberry Pi Retro Emulation in 2026
- Building a CompactFlash-Boot Win98 SE Retro PC: 2026 Workflow
- Best Electric Air Blowers for Gaming Keyboards & PC Fans
- Can the Ryzen 5 5600G Run Local LLMs Without a GPU?
- Best Wheel and Controller for Truck and Farm Sims in 2026
- Build a Raspberry Pi 4 Cyberdeck Music Workstation in 2026
- vLLM vs llama.cpp on a 12GB GPU: Which Serves Local LLMs Faster?
- Raspberry Pi LLM Projects: What Actually Runs in 2026
- Crucial BX500 vs Samsung 970 EVO Plus: SATA vs NVMe
- Best Game Controllers for PC and Console (2026)
- Flux.2-Klein Pipeline: Real-Time Webcam AI at 30 FPS
- Qwen 3.6 35B-A3B KV Cache Deep Dive: Memory, PPL, and Quantization Tradeoffs
- Is the RTX 3060 12GB Still Worth It for 1080p and 1440p Gaming in 2026?
- Logitech G502 Hero vs HyperX QuadCast 2 S vs Elgato Cam Link 4K: Building a Sub-$300 Streaming Starter Kit
- Best Gaming Monitor for 1440p in 2026
- Local Whisper for Stream VODs: What Mic and GPU You Actually Need
- Period-Correct 2001 Pentium III Build: Sound Blaster Audigy Era Synthesis
- Best Budget Gaming Monitors Under $300 for 1080p in 2026
- Best Mouse and Mousepad for FPS Aim Training in 2026
- AMD Ryzen AI Max+ 'Gorgon Halo' 192GB: What 192GB Unified Memory Means for Local LLMs
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090