Skip to main content
InnoGear Webcam Stand Arm for Desk Camera Mount Holder for Logitech Webcam | for C922 C930e C920S C920 C615 C960 C920x BRIO 4K NexiGo N60, Heavy Base, Gooseneck, Max Height 20.9", Eye-level Framing
InnoGear

InnoGear Webcam Stand Arm for Desk Camera Mount Holder for Logitech Webcam

Bottom line: The InnoGear Webcam Stand Arm ($20.89 on Amazon as of 2026-11-20 17:16 UTC): Height adjusts 8.7 to 20.9 inches for true eye-level framing; main trade-off: only fits webcams with a standard 1/4-inch screw hole.

$20.89 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ Height adjusts 8.7 to 20.9 inches for true eye-level framing
  • ✓ Weighted all-metal round base resists tipping better than tripods
  • ✓ Ball head swivels 360 degrees horizontal, 140 degrees vertical
  • ✓ Fits C920, C920S, C922x, C930e, C960, C615, BRIO 4K, NexiGo N60
  • ✓ Four non-slip pads stop desk scratches and damp movement noise

Cons

  • ✗ Only fits webcams with a standard 1/4-inch screw hole
  • ✗ BRIO and MX BRIO need their clip or magnetic mount removed first
  • ✗ Gooseneck must be straightened or removed for max load stability
  • ✗ Round base occupies desk footprint a monitor clamp would not

Manufacturer description

The InnoGear Webcam Stand lifts your Logitech camera off the monitor bezel and puts it at true eye level, where framing looks intentional instead of accidental. An all-metal weighted round base anchors the stand on your desk, and the detachable gooseneck extends the working height anywhere from 8.7 to 20.9 inches, so you can shoot over a monitor, down at a keyboard, or straight on for a call. The swivel ball head gives you 360-degree horizontal and 140-degree vertical rotation, locked in place with a single adjustment knob. The 3/8"-to-1/4" threaded screw fits any webcam with a standard 1/4"…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for InnoGear Webcam Stand Arm, so this read rests on the manufacturer's listed specs and the current price in the streaming gear category (how we evaluate). Compare with similarly-priced alternatives in the streaming gear category before committing. On the listing's own facts, the case for it is "Height adjusts 8.7 to 20.9 inches for true eye-level framing"; the main trade-off is "Only fits webcams with a standard 1/4-inch screw hole". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, load rating and mounting or device compatibility in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this fit my Logitech C920 or BRIO 4K?

Yes. The 3/8"-1/4" threaded screw fits the C920, C920S, C922x, C930e, C960, C615 and BRIO 4K. For BRIO and MX BRIO, detach the included computer clip or magnetic mount first to expose the 1/4" screw hole at the base.

How tall does the stand go?

The adjustable range is 8.7 to 20.9 inches, measured to the mount. That covers sitting eye level at a standard desk and shooting over the top of most monitors.

Will it tip over with a heavier camera on the gooseneck?

The weighted all-metal round base is designed to resist tipping, but InnoGear advises installing without the gooseneck, or bending it into a straight vertical form, to keep the center of gravity over the base for maximum load capacity.

Can I use it with something other than a webcam?

Yes, anything with a standard 1/4" screw hole mounts to it, including ring lights and Tascam recorders. Devices that rely on a proprietary clip or magnetic mount will not attach.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Compatibility and Stability Note: This webcam stand suit only for webcams with standard 1/4" screw hole. For Logitech BRIO/MX BRIO webcams, detach the included computer mounting clip/magnetic mount to access the standard 1/4” screw hold located at the base, enabling compatibility with InnoGear webcam stand mount. For maximum stability and load capacity, please install without the gooseneck or bend the gooseneck into a straight form to make the center of gravity centered.
  • Compact Yet Robust Design: The InnoGear webcam stand features a compact yet weighted all-metal base, ensuring optimal stability and portability. Unlike traditional stands that require unscrewing or re-clamping with every move, this model can be effortlessly repositioned around your home. The weighted round base offers superior protection for your webcams, minimizing the risk of tipping compared to tripod stands.
  • Anti-Scratch & Skid-Proof Base: The base is equipped with four high-quality non-slip pads that ensure your webcam remains securely in place. These pads not only prevent surface scratches but also significantly reduce noise from movement, maintaining a professional and quiet environment for recording and broadcasting.
  • Fully Adjustable for Perfect Angles: Featuring a detachable gooseneck and an intuitive adjustment knob, the InnoGear webcam stand provides a flexible range of motion for precise angle positioning. The adjustable height range of 8.7 to 20.9 inches ensures optimal shooting range, making it ideal for professional live streaming, video conferencing, and content creation.
  • Exceptional Compatibility: Featuring a swivel ball head with 360° horizontal and 140° vertical rotation, this stand is compatible with a wide range of devices. The 3/8"-1/4" screw thread fits standard 1/4” screw hole webcams, including models like Logitech Webcam C920, C920S, C922x, C615, BRIO, C930e, C922, C960, and more. It also supports other devices with a 1/4” screw hole, such as ring lights and Tascam recorders.

Full Specifications

BrandInnoGear
ColorA Black
Model NameWS130
Unit Count1 Count
Model NumberWS130
Mounting TypeGooseneck Stand
Mfr Part NumberWS130
Compatible Devicesmicrophones, webcams, Zoom, ring light, Tascam recorder, GoPro
Enclosure MaterialAlloy Steel
Additional FeaturesProfessional, Fully Adjustable, Compact Yet Robust Design, Exceptional Compatibility
Warranty Description12 months
Compatible Phone Modelsmicrophones, webcams, Zoom, ring light, Tascam recorder, GoPro
Full listing titleInnoGear Webcam Stand Arm for Desk Camera Mount Holder for Logitech Webcam | for C922 C930e C920S C920 C615 C960 C920x BRIO 4K NexiGo N60, Heavy Base, Gooseneck, Max Height 20.9", Eye-level Framing

Ready to buy?

InnoGear Webcam Stand Arm for Desk Camera Mount Holder for Logitech Webcam | for C922 C930e C920S C920 C615 C960 C920x BRIO 4K NexiGo N60, Heavy Base, Gooseneck, Max Height 20.9", Eye-level Framing is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $20.89

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related Streaming Gear

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →