icepc M.2 Heatsink for PS5 PCI-E NVME 2280 SSD Graphene Coating Copper Heat Sink
Bottom line: The icepc M.2 Heatsink: 2mm profile fits laptops and tight M.2 slots; main trade-off: 70mm length leaves part of an 80mm SSD uncovered.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 2mm profile fits laptops and tight M.2 slots
- ✓ Copper body with graphene coating
- ✓ Slanted-slot top adds surface area for cooling
- ✓ Silicone thermal pad included, no tools needed
- ✓ Fits common 2280 drives like SN750, 970 EVO, 970 PRO
Cons
- ✗ 70mm length leaves part of an 80mm SSD uncovered
- ✗ Thin 2mm body has less mass than tall finned coolers
- ✗ Held on by the pad alone, no clips or screws
- ✗ No bottom plate for double-sided SSDs
Manufacturer description
The icepc M.2 Heatsink is a low-profile cooler for 2280 (22x80mm) NVMe and M.2 SSDs. It measures 70x20x2mm, so it fits laptops, tight desktop motherboard slots and the PS5 expansion bay where a tall finned heatsink won't. The body is copper with a graphene coating. icepc points out that graphene's thermal conductivity can reach 5300 W/m·K, against 386.4 W/m·K for pure copper. That figure describes the coating material, not a measured result for this heatsink. The top is cut with slanted slots that add surface area for heat exchange. The polished base sits flush against the thermal pad with…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for icepc M.2 Heatsink, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the ssds & storage category before committing. On the listing's own facts, the case for it is "2mm profile fits laptops and tight M.2 slots"; the main trade-off is "70mm length leaves part of an 80mm SSD uncovered". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for ssds & storage of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this heatsink fit an SSD in the PS5 expansion slot?
The listing names PS5 use. At 70x20x2mm it is much thinner than most finned coolers. Measure your SSD plus the pad and heatsink together and compare that against Sony's M.2 height limit before you install it.
What size SSD does the icepc M.2 heatsink work with?
It is made for 2280 (22x80mm) M.2 SSDs, NVMe or SATA M.2. Listed examples include the WD SN750, Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO and PM981.
How do I attach the heatsink to my SSD?
Put the included silicone thermal pad on the SSD, then press the heatsink onto it. The pad holds the heatsink in place and protects the drive's surface, so you don't need tools, screws or clips.
Is the whole heatsink made of graphene?
No. The body is copper with a graphene coating. The 5300 W/m·K number in the listing is graphene's material conductivity, not a test result for this cooler.
Will it fit in a laptop?
icepc designed it for laptops and other tight spaces, and at 2mm thick it adds very little height. Check the clearance between your laptop's M.2 slot and the bottom panel before you install it.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Graphene is the most efficient heat conductor in the world,Its thermal conductivity can reach 5300W/m·K, pure copper only 386.4W/m·K and aluminum only 237 2W/m·K. You can use the temperature software to test the temperature before and after installation, you will find that it is more efficient than other radiators.
- M.2 Heatsinks : for 2280 size (22x80mm) M.2 NVME SSD, like SN750, 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970PRO,PM981 etc.
- This radiator is suitable for Laptop and some narrow spaces, and through the professional air duct design, it increases the contact area with air for heat exchange, and it can dissipate heat more quickly.
- The slanted slot design provides a more aesthetically pleasing installation display.The ilicone thermal pad enables you to fix the radiator on SSD easily without any tools.
- Please place the silicone cooling pad between the heat sink and the SSD to prevent damage to the SSD and protect the particles of the SSD, which can effectively extend the life of your SSD.
Full Specifications
| Brand | icepc |
|---|---|
| Model | CAICEPC0008-2 |
| Dimensions | 70x20x2mm |
| Unit Count | 1 Count |
| Part Number | CAICEPC0008-2 |
| Compatibility | PC, PS5 |
| M.2 Heatsinks | for 2280 size (22x80mm) M.2 NVME SSD, like SN750, 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970PRO,PM981 etc. |
| Cooler Heatsink Material | Copper |
| Item Dimensions L x W x H | 2.76"L x 0.79"W x 0.08"H |
| Full listing title | M.2 Heatsink for PS5 PCI-E NVME 2280 SSD Graphene Coating Copper Heat Sink,High Performance SSD Radiator with Thermal Pad for Laptop PC 2280 NGFF Solid State Disk Cooler(70x20x2mm) |
Ready to buy?
M.2 Heatsink for PS5 PCI-E NVME 2280 SSD Graphene Coating Copper Heat Sink,High Performance SSD Radiator with Thermal Pad for Laptop PC 2280 NGFF Solid State Disk Cooler(70x20x2mm) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related SSDs & Storage
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- GLM-5.2 on 12GB VRAM: Quantization and Speed on the RTX 3060
- Best Adaptive and One-Handed Gaming Controllers in 2026
- Gemini API Adds MCP + Background Execution: Build a Local Agent Host
- Logitech G920 vs Thrustmaster: Best Beginner Sim Racing Setup 2026
- Best CPU for Streaming and Gaming on a Single PC in 2026
- Best Sim Racing Wheel Under $300 in 2026: Force Feedback That's Worth It
- Best Mechanical Keyboard for Office and Hybrid Coding in 2026
- Raspberry Pi 4 vs Pi Zero W: Which Board for Your First Project?
- Anthropic's 2GW AMD Deal: Should You Still Run Local?
- Raspberry Pi AI Kit 2025: Specs, Uses, and Limits
- Mistral Medium 3.5 Dense Local Inference: Hardware Tiers from 24GB to 192GB
- Ryzen 5 5600G vs Core i7-9700K for 1080p Gaming
- vLLM vs llama.cpp for Single-User Local Chat on a 12GB GPU
- Raspberry Pi AI HAT+ (26 TOPS): What It Actually Runs in 2026
- Active Quake 3 and OpenArena Servers in 2026 — How to Find and Join Them
- Intel Arc Pro B60 Creator 24GB: Workstation GPU Guide
- ComfyUI on a 12GB GPU: SDXL and Flux Setup, VRAM Limits, and Real Throughput
- How Many CPU Cores Does a Local-LLM Rig Actually Need?
- Raspberry Pi Projects for Students (2025 Guide)
- AMD's Ryzen 7 7700X3D Goes Newegg-Exclusive at $329
- Crucial BX500 1TB vs Samsung 870 EVO: Best SATA SSD for a Budget or Retro Build (2026)
- Gaming PC Build 2026: The Reddit-Consensus Parts List
- Claude Mythos: What Anthropic Found + Why Regulators Were Briefed
- Linux Now Boots on a Sega Genesis — Here's What That Actually Means
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090