Formulamod PSU Cable Extension Kit 18AWG Sleeved
Bottom line: The Formulamod PSU Cable Extension Kit 18AWG Sleeved: Covers all three visible runs: 24 Pin ATX, 8 Pin EPS, dual 6+2 Pin PCI-E; main trade-off: extensions only - original PSU cables stay installed underneath.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Covers all three visible runs: 24 Pin ATX, 8 Pin EPS, dual 6+2 Pin PCI-E
- ✓ 18AWG copper conductors under the sleeving, not thinner budget wire
- ✓ Pre-bent structure holds its curve instead of springing back at the tray
- ✓ Heat-shrink-free ends keep sleeving uniform up to the connector housing
- ✓ Cable combs included, so no separate comb purchase to align the runs
Cons
- ✗ Extensions only - original PSU cables stay installed underneath
- ✗ Adds a connector junction and roughly 30cm of length behind the tray
- ✗ Black Orange Grey colorway only; clashes with non-orange builds
- ✗ Fits standard ATX pinouts, so non-standard PSU wiring is a risk
Manufacturer description
The Formulamod PSU Cable Extension Kit gives your build the sleeved-cable look without swapping your power supply. The kit covers the three runs that show through a tempered-glass side panel: a 24 Pin ATX motherboard cable, an 8 Pin EPS CPU cable, and dual 6+2 Pin PCI-E cables for your graphics card, all finished in a Black Orange Grey colorway with cable combs included. Each run uses 18AWG copper conductors under a sleeved exterior, sized for stable power transmission on standard ATX power supplies. The detail that separates this Formulamod kit from cheaper sleeved extensions is the…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Formulamod PSU Cable Extension Kit 18AWG Sleeved, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the cables & connectors category before committing. On the listing's own facts, the case for it is "Covers all three visible runs: 24 Pin ATX, 8 Pin EPS, dual 6+2 Pin PCI-E"; the main trade-off is "Extensions only - original PSU cables stay installed underneath". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Do these replace my power supply cables or plug into them?
They plug into them. Formulamod lists this as an extension kit that must be used together with the original PSU cables, so your stock cables stay connected and the sleeved extensions cover the visible span.
What connectors are included in the kit?
One 24 Pin ATX motherboard extension, one 8 Pin EPS CPU extension, and two 8 Pin (6+2) PCI-E GPU extensions, plus cable combs for keeping the individual wires aligned.
Will this work with my power supply?
It is designed for standard ATX power supplies with 24 Pin ATX, 8 Pin EPS, and 6+2 Pin PCI-E outputs. If your PSU uses a non-standard pinout, confirm against the manufacturer listing before ordering.
Is 18AWG thick enough for a high-wattage graphics card?
The kit uses 18AWG copper wire, which Formulamod specifies for stable power transmission. For a card with unusual power draw, check the wattage guidance on the product listing before buying.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- [CLEAN & ORGANIZED PC BUILD] Create a clean and organized cable layout to enhance the overall appearance of your PC build. Helps reduce visual clutter for a more refined setup.
- [COMPATIBLE WITH STANDARD ATX POWER SUPPLIES] Designed for use with standard ATX power supplies, supporting 24 Pin ATX, 8 Pin EPS and dual 6+2 Pin PCI-E GPU cables. This product is an extension cable and must be used together with the original PSU cables.
- [18AWG SLEEVED CABLE CONSTRUCTIONB] Built with 18AWG copper wires and sleeved exterior for stable power transmission and improved cable durability.
- [PRE-BENT STRUCTURE WITH HEAT-SHRINK-FREE DESIGN] Pre-shaped cable structure helps maintain a consistent curve after installation, while the heat-shrink-free design creates a cleaner and more uniform cable appearance.
- [SUITABLE FOR CUSTOM PC BUILDS] Suitable for PC builders and enthusiasts looking to improve cable organization and achieve a more customized system appearance.
Full Specifications
| Brand | Formulamod |
|---|---|
| Color | Black Orange Grey |
| Gauge | 18.0 |
| Model | Fm-NCK3 |
| Cable Type | Extension |
| Item Shape | Round |
| Model Name | Fm-NCK3 |
| Unit Count | 1 Count |
| Part Number | Fm-NCK3 |
| Compatibility | PC |
| Connector Type | ['Atx', 'Eps', 'Pci-e'] |
| Number of Pins | 24 |
| Outer Material | Nylon |
| Maximum Current | 15 Amps |
| Maximum Voltage | 24 Volts |
| Number of Items | 1 |
| Special Feature | Braided |
| Connector Gender | Male-to-Female |
| Compatible Devices | PC |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Full listing title | Formulamod PSU Cable Extension Kit 18AWG Sleeved, 24 Pin ATX + 8 Pin EPS + Dual 8 Pin PCI-E, Custom PC Cable Extensions with Combs for Clean Cable Management & Gaming PC Build (Black Orange Grey) |
Ready to buy?
Formulamod PSU Cable Extension Kit 18AWG Sleeved, 24 Pin ATX + 8 Pin EPS + Dual 8 Pin PCI-E, Custom PC Cable Extensions with Combs for Clean Cable Management & Gaming PC Build (Black Orange Grey) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cables & Connectors
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- RetroPie Handheld Case Comparison 2025: Top Picks
- Turtle Beach Recon 50 vs BERIBES: Best Budget Gaming Headset Under $40?
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget Homelab and Virtualization Box in 2026
- Running Windows XP Off a 2.5-inch SATA SSD via an IDE Adapter (2026 Guide)
- Imaging and Restoring Vintage IDE Drives in 2026: SATA/IDE-to-USB Adapters Compared
- Sound BlasterX G6 on a Retro PC: Bringing Modern DAC Quality to Pentium III and Athlon XP Builds
- Forza Horizon 6 Runs Surprisingly Well on Steam Deck — Here's What Players Are Reporting
- Intel LLM-Scaler vLLM 1.4 on Arc Pro B70: What the Latest Driver Stack Means for Local Inference
- Best GPU for an AI rig in 2026 — the shortlist
- 8BitDo Pro 2 vs DualSense: Best Controller for PC Gaming in 2026
- RTX 3060 12GB vs RTX 3090 for Local LLMs (2026)
- Logitech G920 vs HORI Racing Wheel: Best Sim Racing Wheel for PS5 & PC
- Open-Source NVK Adds DLSS: What RTX 3060 Owners Get
- How to Run a SATA SSD on a Windows XP Retro Gaming PC (AHCI + Adapters)
- First-Time CPU Delidding: What to Expect and How to Get It Right
- Forza Horizon 6: 8GB vs 16GB VRAM GPU Benchmark Guide
- PCI vs ISA Serial Cards on Windows 98 and DOS: Which Chipsets Actually Work
- Using Claude to Drive Period-Correct Win98 Driver Installs on Voodoo and GeForce 4 Hardware
- RTX 3090 24GB vs RTX 4060 Ti 8GB in 2026: Used VRAM or New Efficiency?
- The Sound Blaster Monopoly: How Creative Labs Owned PC Audio
- Noctua NH-U12S vs Cooler Master ML240L RGB for a Ryzen 7 5800X gaming build: which cooler actually holds…
- The KVM That Runs a Pentium 4 Instead of a Raspberry Pi
- Best SSD for PS5 Storage Expansion Under $100 (2026)
- Build a Silent Win98 Retro PC with CompactFlash Storage (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090