SEESII Upgraded NanoVNA-H4 Vector Network Analyzer
Bottom line: The SEESII Upgraded NanoVNA-H4 Vector Network Analyzer: Wide 9KHz-1.5GHz sweep covers HF, VHF, and UHF antennas on one instrument; main trade-off: microSD card not included despite the built-in card slot.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Wide 9KHz-1.5GHz sweep covers HF, VHF, and UHF antennas on one instrument
- ✓ 4-inch LCD touchscreen with stylus, larger than the 2.8-inch NanoVNA-H
- ✓ Better than 70dB dynamic range across the 50KHz-300MHz si5351 direct band
- ✓ MicroSD slot saves field sweeps and screenshots to cards up to 32GB
- ✓ 1950mAh battery plus OPEN/SHORT/LOAD standards and two RG316 cables included
Cons
- ✗ MicroSD card not included despite the built-in card slot
- ✗ Dynamic range drops to 40dB above 900MHz on the harmonic extension
- ✗ S21 measurement needs manual transceiver port rewiring, not a menu toggle
- ✗ Touchstone export requires installing NanoVNASaver on a separate PC
Manufacturer description
The SEESII Upgraded NanoVNA-H4 puts a full vector network analyzer in your hand for antenna work, sweeping 9KHz to 1.5GHz across HF, VHF, and UHF. Built on Hugen's V4.4 hardware with a 4-inch LCD touchscreen, it reads S11 and S21 parameters, SWR, phase, delay, and plots them on a Smith chart so you can see exactly where an antenna resonates instead of guessing. Dynamic range tracks the si5351 output: better than 70dB from 50KHz to 300MHz, better than 60dB from 300MHz to 900MHz, and better than 40dB in the harmonic-extended 900MHz to 1.5GHz band. A MicroSD slot takes cards up to 32GB for…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for SEESII Upgraded NanoVNA-H4 Vector Network Analyzer, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies & cables category before committing. On the listing's own facts, the case for it is "Wide 9KHz-1.5GHz sweep covers HF, VHF, and UHF antennas on one instrument"; the main trade-off is "MicroSD card not included despite the built-in card slot". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
What frequency range does the NanoVNA-H4 cover?
It measures from 9KHz to 1.5GHz. The si5351 direct output handles 50KHz to 300MHz, with harmonic extension carrying the sweep through 900MHz and up to 1.5GHz.
Is the dynamic range the same across the whole band?
No. Seesii specifies better than 70dB from 50KHz to 300MHz, better than 60dB from 300MHz to 900MHz, and better than 40dB from 900MHz to 1.5GHz.
What comes in the box?
The NanoVNA-H4 with a 1950mAh battery, a USB Type-C cable, two 15cm SMA male-to-male RG316 cables, OPEN, SHORT, and LOAD calibration standards, and a touchscreen stylus.
Can I save measurements and pull them into PC software?
Yes. A built-in MicroSD slot takes cards up to 32GB (card not included), and NanoVNASaver over USB exports Touchstone .snp files for RF design and simulation tools.
Can it measure S21 as well as S11?
Yes, the TX/RX method captures complete S11 and S21 parameters, though you manually swap the transceiver port wiring to switch between them.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- UPGRADED NANOVNA ANALYZER: SeeSii Nanovna-h4 Vector Network Analyzer is developed by Hugen. With the latest 4.4 version,9KHz-1.5GHz measure range,4.0 inch LCD touchscreen, mini and portable design. This Antenna Analyzer is provides outstanding vector network measurement capabilities and perfect for evaluating antenna resonance and SWR. It is a very handy & smart analyzer for electronics engineers, amateur radio operators, or radio diy amateurs
- BUILT-IN MICRO-SD PORT & TIME DISPLAY: The latest antenna analyzer with a MicroSD card port, so you can save field test data or screens to a MicroSD card at any time, supporting up to 32GB memory card. (Not included in the package).In addition, different from the old version of NanoVNAs, the date and time can be customized, which is convenient for you to further record and save data. The default firmware main function is used for antenna performance measurement
- IMPROVED FREQUENCY ALGORITHM: The Vector Network Analyzer can use the old harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB of dynamics, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics. Great for troubleshooting antennas and improving performance
- PC CONNECTION & TX/RX FUNCTION: The VNA analyzer uses PC software NanoVNASaver, it can connect to a NanoVNA and extracts the data for display on a computer for saving to Touchstone files. We can export Touchstone (snp) files for various radio design and simulation software through PC software. In addition, the default firmware is mainly used for antenna performance measurement. The TX/RX method can measure the complete S11/S21 parameters (need to manually replace the transceiver port wiring)
- Abundant Accessories: Equipped with 1x NanoVNA-H4(with 1950mA-h battery), 1x USB Type-C cable, 2 x 15cm SMA male to male RG316 RF cable, 1x SMA male calibration kit - OPEN,1x SMA male calibration kit - SHORT,1 x SMA male calibration kit - LOAD,1 x Touchscreen pen. It's very useful as an antenna analyzer for your ham station, easy to set without fancy calibration
- Reliable After-Sales Service:We provide professional technical support to keep you away from after-sales worries. If you are not satisfied with SeeSii Nanovna Vector Analyzer or have any other questions, please feel free to contact us. Our after-sales service experts will reply to your information as soon as possible, We will do our best to solve your problems, and you can purchase and experience with confidence
Full Specifications
| Brand | Seesii |
|---|---|
| Color | Nanovna H4 |
| Antenna | Radio |
| Impedance | 50 Ohms |
| Unit Count | 1.0 Count |
| Connectivity | USB |
| Model Number | NanoVNA-H4 |
| Compatibility | PC |
| Maximum Range | 10 Feet |
| Built-In Media | Nanovna-H4 Kit |
| Mfr Part Number | B085CFHTBM |
| Number of Items | 1 |
| Number of Packs | 1 |
| AntennaDescription | Radio |
| Item Dimensions L x W x H | 2.95"L x 2.95"W x 0.71"H |
| Full listing title | SEESII Upgraded NanoVNA-H4 Vector Network Analyzer, Latest V4.4 9KHz-1.5GHz HF VHF UHF 4" Touch Screen VNA Antenna Analyzer Measures S Parameters,Voltage Standing Wave Ratio, Phase,Delay, Smith Chart |
Ready to buy?
SEESII Upgraded NanoVNA-H4 Vector Network Analyzer, Latest V4.4 9KHz-1.5GHz HF VHF UHF 4" Touch Screen VNA Antenna Analyzer Measures S Parameters,Voltage Standing Wave Ratio, Phase,Delay, Smith Chart is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Best Budget Gaming PC Parts in 2026: A Ryzen + RTX 3060 Build
- Best GPU for Stable Diffusion Under $300 (2026): RTX 3060
- AMD Ryzen AI Max 400 'Gorgon Halo': 192GB Unified Memory APU Hits $3,999
- Dumping and Imaging Vintage IDE and CompactFlash Drives in 2026: A Safe Workflow
- Best Mechanical Keyboard for Office Work & Productivity (2026)
- AMD RX 9070 XT Hits All-Time Low $629 in Amazon Lightning Sale
- Are We the Last Generation of PC Builders?
- When Does a Homelab Become a Job?
- Best GPU for an AI rig in 2026 — the shortlist
- Voodoo 5 6000 Stability: Hangs, Wedges and a Bricked Board
- Watching a Z80 Live From a Raspberry Pi RP2350
- Jellyfin on a Ryzen 5 5600G: 4K Transcoding on a $400 Mini-Server (2026)
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 4090
- ComfyUI on an RTX 3060 12GB: Real Image-Gen Throughput in 2026
- Logitech G502 Hero in 2026: Is the $40 Classic Still the Mouse to Beat?
- 4K 60Hz or 1440p 240Hz? Picking a Monitor for an RTX 3060-Class GPU
- Ryzen 5 5600G vs Ryzen 7 5700X for a No-GPU Home Server
- Build a Silent Win98 Retro PC with CompactFlash Storage (2026)
- Running a Local Bug-Hunting LLM on an RTX 3060 12GB
- Best Streaming Starter Kit for New Twitch Streamers in 2026
- Gemma 4 12B Fits Multimodal AI Into 16GB of RAM
- Used RTX 3090 vs New GPU for Local LLMs: 2026 Reddit Consensus
- RTX 5090 vs RX 9070 XT: Specs, Gaming & AI Compared
- Best Work-From-Home Kit for Gamers in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090