Skip to main content
DROK Adjustable Voltage Regulator DC, Buck Boost Converter 6.0V-36V 9v 12v to DC 0.6-36V 24v 5A Power Supply Panel, Constant Current Volt Step Up Down Module
DROK

DROK Adjustable Voltage Regulator DC

Bottom line: The DROK Adjustable Voltage Regulator DC: Buck and boost in one: 6-36V input converts to any 0.6-36V output; main trade-off: 80W ceiling: full 5A only available at about 16V output or below.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Buck and boost in one: 6-36V input converts to any 0.6-36V output
  • ✓ 0.01V voltage and 0.001A current resolution for precise bench settings
  • ✓ Constant current up to 5A doubles as an LED driver or battery charger
  • ✓ OVP, OCP and OPP plus short-circuit and anti-backflow hardware protection
  • ✓ 10 memory groups (M0-M9) with M1/M2 quick recall and power-loss resume

Cons

  • ✗ 80W ceiling: full 5A only available at about 16V output or below
  • ✗ No AC mains input; needs a separate 6-36V DC supply rated up to 6A
  • ✗ Bare panel module; you supply the enclosure, wiring and terminals
  • ✗ Dense multi-parameter display and menus take time to learn

Manufacturer description

The DROK Adjustable Voltage Regulator is a buck boost converter that turns a DC source between 6V and 36V into a regulated output anywhere from 0.6V to 36V. That means one 12V or 24V adapter can run a 5V logic board, a 9V circuit or a 30V project. Output current goes from 0 to 5A, and total output power tops out at 80W. You set voltage in 0.01V steps and current in 0.001A steps. Constant current mode lets the module work as an LED driver or a battery charger. Because the output has anti-backflow protection, you can charge a rechargeable pack directly without adding a diode. Software…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for DROK Adjustable Voltage Regulator DC, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power protection category before committing. On the listing's own facts, the case for it is "Buck and boost in one: 6-36V input converts to any 0.6-36V output"; the main trade-off is "80W ceiling: full 5A only available at about 16V output or below". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Can I power the DROK buck boost converter from a 12V or 24V adapter?

Yes. It accepts DC input from 6.0V to 36V, so 12V and 24V adapters both work. Input current is limited to 6A maximum, so pick an adapter sized for the load you plan to run. The module does not plug directly into AC wall power.

Can it deliver 5A at 24V output?

No. Output power is capped at 80W, so the full 5A is only available up to about 16V. At 24V the most you can draw is roughly 3.3A, and at 36V roughly 2.2A.

Can I use it to charge a rechargeable battery?

Yes. Set the output voltage and the current limit to match your battery's charging spec. Output anti-backflow protection lets you connect the battery directly without adding an external diode.

How precise are the voltage and current settings?

Voltage resolution is 0.01V and current resolution is 0.001A. Rated accuracy is +/-0.3% + 1 digit for voltage and +/-0.4% + 3 digits for current.

Does it remember my settings after power is cut?

Yes. Your last voltage and current settings come back after power down. You can also save up to 10 setting groups (M0-M9). M0 is the default, and M1 and M2 can be called up quickly.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Variable Power Supply --- input voltage range DC 6.0-36V, output voltage range DC 0.6-36V, max output current 5A, max output power 80W.
  • Easy to Use --- allows to set volts and limit the current, power on off and accurate voltage setting return after power down.
  • Application --- a compact and powerful, on the go variable power supply or LED driver; DIY lab power supply.
  • Digital Display --- input or out voltage, current, temperature, power, electric capacity, electric quantity, running time, voltage and current curve, system and power parameters.
  • Memory Data --- 10 data groups of M0-M9 can be stored. Default will be stored in data group M0 and M1/M2 data group can be quickly called up.

Full Specifications

BrandDROK
Model200517
Part Number200517
Power SourceBattery Powered, Corded Electric
Mounting TypePanel Mount
Specification MetCE, UL
Full listing titleDROK Adjustable Voltage Regulator DC, Buck Boost Converter 6.0V-36V 9v 12v to DC 0.6-36V 24v 5A Power Supply Panel, Constant Current Volt Step Up Down Module

Ready to buy?

DROK Adjustable Voltage Regulator DC, Buck Boost Converter 6.0V-36V 9v 12v to DC 0.6-36V 24v 5A Power Supply Panel, Constant Current Volt Step Up Down Module is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Power Protection

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →