Miuzei
Miuzei Case for Raspberry Pi 4 with Fan 35mm
Bottom line: The Miuzei Case for Raspberry Pi 4 with Fan 35mm ($13.99 on Amazon as of 2026-10-21 10:13 UTC, orderable but not in stock): 35mm fan at 5500 rpm plus 4 aluminum heatsinks for active cooling; main trade-off: raspberry Pi 4 board sold separately.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 35mm fan at 5500 rpm plus 4 aluminum heatsinks for active cooling
- ✓ 5V 3A USB-C power supply included, with inline on/off switch
- ✓ 3-layer split design: remove top or bottom to reach GPIO and camera
- ✓ Fits Pi 4 Model B in 8GB, 4GB and 2GB versions
- ✓ Smoked acrylic top shows status LEDs and parts inside
Cons
- ✗ Raspberry Pi 4 board sold separately
- ✗ Listed for Pi 4 Model B only; no Pi 5 or Pi 3 fit stated
- ✗ Fan sold as quiet, but no decibel rating is published
- ✗ No microSD card or micro-HDMI cable in the kit
Manufacturer description
The Miuzei Raspberry Pi 4 case kit gives your Pi 4 Model B an enclosure, active cooling and a power supply in one purchase. It fits the 8GB, 4GB and 2GB versions of the board. Cooling comes from two parts working together. A 35mm fan spinning at 5500 rpm pushes air across the board, and 4 aluminum heatsinks add surface area over the hot chips. That helps when you run your Pi as a home server, a retro emulation box or a desktop that stays on all day. The case has 3 layers. You can remove the top cover and the bottom separately, so you can attach a camera or GPIO expansion board without taking…
SpecPicks Verdict
SpecPicks scored Miuzei Case for Raspberry Pi 4 with Fan 35mm using a rating × review-volume × price-fit model applied to published specs and reviews across the single-board computers category. Miuzei's single-board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for single-board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Which Raspberry Pi models does the Miuzei case fit?
It is built for the Raspberry Pi 4 Model B and lists the 8GB, 4GB and 2GB versions as compatible. Other Pi models are not listed, so check the product listing before buying for a Pi 5 or Pi 3.
What cooling does this Miuzei Pi 4 case include?
It has a 35mm fan that spins at 5500 rpm and 4 aluminum heatsinks. The heatsinks add surface area over the board's chips, and the fan moves air across them.
Does the power supply have an on/off switch?
Yes. The included 5V 3A USB-C power supply has an on/off switch, and its cable is 1.5m (5ft) long. The 3A rating covers the Pi 4's power needs, which helps avoid low-voltage warnings.
Can I use the GPIO pins and a camera module with the case on?
Yes. The case has 3 layers, and you can remove the top cover and the bottom separately to reach the GPIO header and camera connector. Miuzei says it works with external cameras and GPIO expansion boards.
Is the Raspberry Pi board included in this kit?
No. The kit includes the case, the 35mm fan, 4 aluminum heatsinks and the 5V 3A USB-C power supply. You need to buy the Raspberry Pi 4 board, a microSD card and a micro-HDMI cable separately.
Key Features
- Visibility Design Highly Visible Acrylic Top Lid；You Can See the Running Status of Pi 4 in Real-time and The Condition Of Parts of Inside The Case,The smoked tint top is a classy touch.
- Split design/easy assembly 3-layer structure design, the upper cover and bottom can be disassembled separately to assemble other accessories, which is very convenient for users who often use GPIO & Camrea.
- Dual Cooling System Equipped with a 35 mm quiet fan (5500 rpm) and 4 × aluminium heat sink. This increases the cooling area and creates more airflow for quick cooling.
- Easy access to GPIO and camera：Miuzei Case Compatible with Raspberry Pi, each interface is fully adapted, and the external camera and GPIO expansion board can be perfectly matched.
- 5V 3A Power Supply with On/Off Switch Do Not Worry About Low Voltage and Current Instability. Universal USB-C Interface, Total Lenght：1.5m / 5ft.
Full Specifications
| UPC | 191762772332 |
|---|---|
| ASIN | B089NQBBBK |
| Brand | Miuzei |
| Color | silvery black |
| Material | Aluminum |
| Case Type | Raspberry Pi |
| Model Name | case for raspberry pi 4 |
| Light Color | silvery black |
| Manufacturer | Miuzei |
| Model Number | case for raspberry pi 4 |
| Cooling Method | Air |
| Item Type Name | raspberry pi case |
| Number of Fans | 4 |
| Total Usb Ports | 1 |
| Antenna Location | Gaming, businese |
| Enclosure Material | Aluminum |
| Total USB 2.0 Ports | 2 |
| Total USB 3.0 Ports | 1 |
| Hard Disk Form Factor | 3.5 Inches |
| Number of USB 2 Ports | 2 |
| Full listing title | Miuzei Case for Raspberry Pi 4 with Fan 35mm, 5V 3A Power Supply, 4 pcs Heatsinks for Raspberry Pi 4 Model B 8gb / 4gb / 2gb |
Ready to buy?
Miuzei Case for Raspberry Pi 4 with Fan 35mm, 5V 3A Power Supply, 4 pcs Heatsinks for Raspberry Pi 4 Model B 8gb / 4gb / 2gb is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Related Single-Board Computers
Miuzei Case for Raspberry Pi 4 with Fan 35mm head-to-head
Side-by-side specs, prices, and a pick for each matchup — no tab-switching.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- AMD Ryzen Buying Guide 2026: Every Tier Compared
- Best Budget 4K Gaming Monitor in 2026
- Best GPU for i7-13700K at 1440p 180Hz (GTX 1080 Upgrade)
- Raspberry Pi 500 Specs, Price & Real-World Use in 2026
- Host a Quake 3 + UT99 LAN Server on a Raspberry Pi 4 in 2026
- RTX 5080 vs RTX 4080 for LLM Inference: Same 16GB, Different Answer (2026)
- GeForce 4 Ti 4600 AGP in a Windows XP Build: Drivers, Gotchas and Benchmarks
- Best Gaming Webcam and Microphone Bundle for Streamers in 2026
- Best 4K Monitor for PS5 and Xbox Series X Console Gaming in 2026
- GPT-5.6 Sol Matches Fable 5 at 1/3 Cost: Local-Rig Fallout
- Best Budget Gaming CPU: Ryzen 5 5600G vs 5700X vs i7-9700K
- Best Racing Wheels and Controllers for Sim Racing in 2026
- Best 4K Monitor for Forza Horizon 6 on PC (2026)
- Ryzen 5600G vs 5700X vs 5800X: Best CPU for a 1080p Gaming Build (2026)
- Best Gaming Webcam and Streaming Setup in 2026
- Forza Horizon 6 Hits 130K Concurrent on Steam, Tops PC Gamer at 84/100
- Ryzen AI Developer Platform: AMD's Debian Linux for AI Devs
- Intel Arc Pro B60 Creator 24GB: Workstation GPU Guide
- Best Webcam for Streaming Under $200 (2026)
- Framework RTX 5070 12GB Module: Why It's $1,199, Not $699
- Best Plug-and-Play Retro Gaming Consoles to Buy in 2026
- Best Budget Gaming Audio for 2026: Headsets, Earbuds, Mics and DACs
- 8BitDo Pro 2 vs DualSense: Best Controller for PC Gaming in 2026
- Acti Brings AI Agents Into Your Smartphone Keyboard
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090