Skip to main content
LoveRPi Anodized Performance Heatsink Set for Raspberry Pi 4 Model B (2 Sets)
LoveRPi

LoveRPi Anodized Performance Heatsink Set for Raspberry Pi 4 Model B (2 Sets)

Bottom line: The LoveRPi Anodized Performance Heatsink Set for Raspberry Pi 4 Model B ($7.00 on Amazon as of 2026-10-06): Straight fins twice the height of typical Pi heatsinks for more surface area; main trade-off: passive cooling only; heavy overclocks still benefit from an added fan.

$7.00

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Buy on Amazon — $7.00 Compare to similar single-board computers

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.

Pros & Cons

Pros

  • ✓ Straight fins twice the height of typical Pi heatsinks for more surface area
  • ✓ Holds 1.5GHz for over a minute, about 5x longer than a bare Pi 4
  • ✓ Drops idle temperatures by roughly 20°F for longer component life
  • ✓ Two sets included with exact-fit CPU and LAN chipset heatsinks

Cons

  • ✗ Passive cooling only; heavy overclocks still benefit from an added fan
  • ✗ 3M adhesive is single-use, so repositioning weakens the bond
  • ✗ No dedicated USB 3.0 bridge heatsink though it runs above 50°C
  • ✗ Taller fins may not clear slim or low-profile Pi 4 cases

Manufacturer description

Included Parts: Large Straight-Fin Anodized Heatsink with 3M adhesive for SoCSmall Straight-Fin Anodized Heatsink with 3M adhesive for LAN Chipset Supported Boards: Raspberry Pi 4 Model BRaspberry Pi 3 Model B+Raspberry Pi 3 Model BRaspberry Pi 2 Model B Additional Boards supported by Large Heatsink: Libre Computer Board ALL-H3-CCLibre Computer Board AML-S905X-CCLibre Computer Board ROC-RK3328-CCBanana Pi M3 (Allwinner A83T)Orange Pi Boards with Allwinner H2+/H3/H5

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored LoveRPi Anodized Performance Heatsink Set for Raspberry Pi 4 Model B using a rating × review-volume × price-fit model applied to published specs and reviews across the single-board computers category. LoveRPi's single-board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for single-board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

  • EXTREME PERFORMANCE Straight-fin design with twice the height of other heatsinks for extra heat dissipation performance whether actively or passively cooled. Mandatory for applications in high temperature, sealed, or overclocked applications. Heatsinks increase the surface area for heat transfer but still requires temperature gradient to be effective.
  • LONG LASTING EXACT FIT CPU and LAN chipset heatsinks are fabricated specifically for the Raspberry Pi 4 Model B. Double-sided thermal transfer tape offers high thermal conductivity and long lasting adhesion in all mounting scenarios.
  • QUICK AND SIMPLE INSTALLATION Peel and stick in the orientation with the most airflow. Most effective solution for reliable performance and longevity. No more messy thermal paste and compatible with LoveRPi Power over Ethernet HAT v2 for Raspberry Pi 4.
  • MAXIMUM FREQUENCY FOR LONGER Maintain 1.5GHz for more than a minute before throttling kicks in. That is 5x longer than without a heatsink. Decrease idle temperatures by 20°F for longer component life and more reliable operation.
  • MUST HAVE FOR RASPBERRY PI 4 The SoC and USB 3.0 bridge require heatsinks since they exceed 50°C. Other components like LPDDR4 and gigabit PHY are best passively cooled since they are near components with higher z-height that may short circuit. Please attach the heatsinks as pictured to avoid accidental damage to the Raspberry Pi 4 Model B board.

Full Specifications

UPC647923367638
ASINB083QRVJ5T
BrandLoveRPi
Brand NameLoveRPi
ManufacturerLoveRPi
Mounting TypePanel Mount

Ready to buy?

LoveRPi Anodized Performance Heatsink Set for Raspberry Pi 4 Model B (2 Sets) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $7.00

*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.

Related Single-Board Computers

LoveRPi Anodized Performance Heatsink Set for… head-to-head

Side-by-side specs, prices, and a pick for each matchup — no tab-switching.

Build your own comparison →

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
LoveRPi Anodized Performance Heatsink Set for Raspberry Pi 4 Model B (2 Sets)
$7.00
View on Amazon →