NFHK
NGFF B/M-Key SSD to 2.5 inch IDE 44Pin Hard Disk Case Enclosure for Notebook Laptop
Bottom line: The NFHK NGFF B/M-Key SSD to 2.5 inch IDE 44Pin Hard Disk Case Enclosure ($13.99 on Amazon as of 2026-10-06): Bridges NGFF B/M-key SATA SSDs into legacy 44-pin IDE laptop bays; main trade-off: rejects M-key and NVMe SSDs outright, so drive shopping is restricted.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Bridges NGFF B/M-key SATA SSDs into legacy 44-pin IDE laptop bays
- ✓ JM20330 SATA bridge chip handles the protocol translation
- ✓ Compact 70mm x 10mm x 9.5mm shell fits standard 2.5-inch drive slots
- ✓ Silent solid-state replacement for a failing vintage notebook hard disk
Cons
- ✗ Rejects M-key and NVMe SSDs outright, so drive shopping is restricted
- ✗ JM20330 is an older bridge chip, not a current-generation controller
- ✗ No stated maximum SSD capacity, so large drives are a gamble
- ✗ NFHK lists no warranty terms in the product details
Manufacturer description
NGFF B/M-key SSD to 2.5 inch IDE 44Pin Hard Disk Case Enclosure for Notebook LaptopThis adapter using JM20330 Serial ATA Bridge Chip.Case Size:70mm x 10mm X 9.5mmUsed with NGFF B/M-key SSD ONLY!It doesn't work for M-key and NVME SSD.
SpecPicks Verdict
SpecPicks scored NFHK NGFF B/M-Key SSD to 2.5 inch IDE 44Pin Hard Disk Case Enclosure using a rating × review-volume × price-fit model applied to published specs and reviews across the storage adapters category. NFHK's storage adapters lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for storage adapters of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- NGFF B/M-key SSD to 2.5 inch IDE 44Pin Hard Disk Case Enclosure for Notebook Laptop
- This adapter using JM20330 Serial ATA Bridge Chip.
- Case Size:70mm x 10mm X 9.5mm
- Used with NGFF B/M-key SSD ONLY!
- It doesn't work for M-key and NVME SSD.
Full Specifications
| Brand | NFHK |
|---|---|
| Color | Green NGFF to IDE-2.5 |
| Case Size | 70mm x 10mm X 9.5mm |
| Model Number | NF-SA-107 |
| Mfr Part Number | NF-SA-107 |
| Hardware Platform | Laptop |
| Compatible Devices | Laptop |
| Enclosure Material | Metal |
| Hardware Interface | IDE |
| Hard Disk Form Factor | 2.5 Inches |
| Item Dimensions L x W x H | 0.37"H |
| Supported Devices Quantity | 1 |
Ready to buy?
NGFF B/M-Key SSD to 2.5 inch IDE 44Pin Hard Disk Case Enclosure for Notebook Laptop is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Storage Adapters
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- BOSGAME VTA-439: A Linux-Friendly Ryzen AI 9 HX 470 Mini PC
- Modern Retro Console Mods: 2026 Upgrade Guide
- GLM-5.2 vs Frontier Models on GDPval-AA: What It Means for Local Builders
- Raspberry Pi Air Quality Sensor Guide: Setup & Sensor Picks
- How to Find and Join Active UT99 and UT2004 Servers in 2026
- Is the RTX 3060 12GB Still Worth It for 1080p and 1440p Gaming in 2026?
- Logitech G29 vs HORI Force Feedback: Which Sim Wheel for Beginners?
- Best 12GB GPU for Stable Diffusion: RTX 3060 in 2026
- Best GPU + Monitor Pairings for 1440p QD-Mini-LED Gaming in 2026
- Best SSD and Controller Pairing for a Living-Room Gaming PC
- Sound Blaster Audigy FX vs G6: Modern PCIe and USB Audio for Retro-Gaming Rigs
- Best Storage Upgrades for Retro and Budget PC Builds in 2026
- Running Your Own AI Guardrail Model on a 12GB GPU in 2026
- Best Budget CPU for 1080p Gaming: Ryzen 7 5700X vs 5800X vs i7-9700K
- Best Budget AM4 Build for Local LLM Inference in 2026
- RTX 5080 vs RTX 4090: Which GPU Is Best in 2026?
- Best Retro Gaming Storage Adapters for Win98 and DOS PCs in 2026
- Best Budget SSD for PS5 and Steam Download Cache in 2026
- How to run Llama 3.1 8B on Apple M4 Max
- Ryzen 9 3900X vs Ryzen 5 5600G for CPU-Only Local LLM Inference (2026)
- Mistral Seeks €3B: What a Bigger European Lab Means for Local Rigs
- 8BitDo Pro 2 vs GameSir G7 SE: Best PC Emulation Controller
- Best Mouse Pads for Competitive FPS Gaming in 2026
- AI-Driven Driver Recovery for SB Live! and Audigy on Win98: How an LLM Watches the Installer
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090