Klein Tools 80045 Screwdriver and Nut Driver Tool Kit (3-Piece)
Bottom line: The Klein Tools 80045 Screwdriver and Nut Driver Tool Kit: 11-in-1 magnetic driver holds 8 tips and converts to 3 nut driver sizes; main trade-off: only 3 drivers, so no pliers, tweezers, or spudgers for teardowns.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 11-in-1 magnetic driver holds 8 tips and converts to 3 nut driver sizes
- ✓ Stubby driver reaches screws behind drive cages and PSU brackets
- ✓ Electronics driver covers #0/#00 Phillips and 3/32-Inch slotted for board work
- ✓ Rare earth magnets keep bits and loose fasteners from dropping into a case
Cons
- ✗ Only 3 drivers, so no pliers, tweezers, or spudgers for teardowns
- ✗ Nut driver sizes stop at 1/4-Inch and 5/16-Inch
- ✗ No Torx, hex, or security bits for consoles and handhelds
- ✗ Magnetized tips need care around bare drive platters and CRT boards
Manufacturer description
The Klein Tools 80045 Screwdriver and Nut Driver Tool Kit bundles three purpose-built drivers that cover almost every fastener you meet inside a PC case, a retro console shell, or a vintage motherboard tray. The 11-in-1 magnetic screwdriver carries 8 popular tips on an integrated shaft and converts to three nut driver sizes, so you can swap from a #2 Phillips to a 1/4-Inch nut driver without walking back to the bench. The multi-bit stubby handles 4 universal tips plus 2 nut driver sizes, and its short body reaches screws buried behind drive cages and PSU brackets. For board-level work, the…
SpecPicks Verdict
SpecPicks scored Klein Tools 80045 Screwdriver and Nut Driver Tool Kit using a rating × review-volume × price-fit model applied to published specs and reviews across the tools & maintenance category. Compare with similarly-priced alternatives in the tools & maintenance category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
What bit sizes come with the Klein Tools 80045 kit?
The 11-in-1 includes #1 and #2 Phillips, 3/16-Inch (5 mm) and 1/4-Inch (6 mm) slotted, plus 1/4-Inch (6 mm) and 5/16-Inch (8 mm) nut drivers. The electronics screwdriver adds #0 and #00 Phillips and 1/8-Inch (3.2 mm) and 3/32-Inch (2.4 mm) slotted tips.
Is this kit good for building a PC?
Yes. The #2 Phillips on the 11-in-1 fits standard case and motherboard screws, the magnetic barrel holds standoffs and loose screws, and the stubby reaches fasteners in tight bays. For M.2 screws, the #0 Phillips on the electronics driver is the right size.
Are the screwdrivers magnetic?
Yes. Klein uses rare earth magnets in the barrel and shaft to hold bits and fasteners securely. That helps when you are working over an open case, though you should keep magnetized tips away from exposed drive media.
How many pieces are in the 80045 kit?
Three: the 11-in-1 magnetic screwdriver / nut driver, the multi-bit stubby screwdriver that holds 4 universal tips and converts to 2 nut driver sizes, and the multi-bit electronics screwdriver with a swivel cap.
Key Features
- SMART BUY: A complete, high-performance kit that offers convenience and value
- MAGNETIC BARREL holds 8 popular tips and converts to 3 nut driver sizes
- SECURELY HOLD BITS AND FASTENERS with the strong, rare earth magnets
- INDUSTRIAL STENGTH heat treated bits
- COMPACT INTERCHANGEABLE SHAFT holds 4 universal tips and converts to 2 nut driver sizes
- BIT SIZES - nut driver sizes 1/4-Inch (6 mm) and 5/16-Inch (8 mm) and Screwdriver sizes #1 and #2 Phillips, 3/16-Inch (5 mm) and 1/4-Inch (6 mm) slotted
Full Specifications
| Brand | KLEIN TOOLS |
|---|---|
| Color | Orange, Silver, Yellow |
| Set Name | Klein Tools 80045 Screwdriver and Nut Driver Tool Kit |
| Head Size | 1/4 inch, 5/16 inch, #1, #2, #0, #00, 3/16 inch, 1/8 inch, 3/32 inch |
| SMART BUY | A complete, high-performance kit that offers convenience and value |
| Head Style | Flat, Swivel |
| Model Name | 80045 |
| Unit Count | 1 Count |
| Model Number | 80045 |
| Item Type Name | Klein Tools 80045 Screwdriver and Nut Driver Tool Kit |
| Item Dimensions | 15 x 10 x 3 inches |
| Number of Items | 3 |
| Special Feature | Magnetic Tip |
| Included Components | Klein Tools 80045 Screwdriver and Nut Driver Tool Kit |
| Manufacturer Part Number | 80045 |
| Recommended Uses For Product | Construction, Home Improvement, Auto Repair, Electronics Item |
| Full listing title | Klein Tools 80045 Screwdriver and Nut Driver Tool Kit, Includes Magnetic 11 in 1, Multi-Bit Stubby and Electronics Screwdrivers, 3-Piece |
Ready to buy?
Klein Tools 80045 Screwdriver and Nut Driver Tool Kit, Includes Magnetic 11 in 1, Multi-Bit Stubby and Electronics Screwdrivers, 3-Piece is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Can a Raspberry Pi 4 8GB Run a Local LLM in 2026? tok/s for TinyLlama, Phi, and Qwen
- Local Image Generation AI in 2026: AMD Hardware Performance & Setup Guide
- Microsoft + Nvidia Agent PCs: Hardware to Run Agents Locally
- After the Claude Code Malware Scare: Build an Isolated Local Agent Rig
- Blue Yeti vs HyperX QuadCast 2 S: Which USB Mic Wins for Streaming in 2026?
- IDE-to-USB and CompactFlash Adapters for Retro PCs: FIDECO vs Unitek vs Vantec
- Self-Hosting Jellyfin on a Raspberry Pi 4 8GB: Real Performance
- Xbox Cloud Gaming in 2025: How It Works & What You Need
- Anthropic Shutdown Reignites the AI-Sovereignty Debate — and the Case for Local Inference
- Logitech G502 Hero vs SteelSeries QcK: Building a Competitive FPS Loadout in 2026
- Best Plug-and-Play Retro & Budget Consoles in 2026: 5 Picks Ranked
- Best GPU for Local Llama 3 8B Under $400: Why the RTX 3060 12GB Wins
- Best Plug-and-Play Retro Gaming Consoles to Buy in 2026
- Using Claude to Drive Period-Correct Win98 Driver Installs on Voodoo and GeForce 4 Hardware
- Ryzen 7 5800X3D vs Intel Core i7-14700K for DDR4 Gaming
- WoW Mythic+ 3500 on Steam Deck: Is It Possible?
- Backing Up Vintage IDE Drives to CompactFlash in 2026
- CompactFlash as an IDE Boot Drive for Your Win98 Retro PC in 2026
- Best 4K Gaming Monitor Under $500 in 2026
- Best SSDs and Adapters for Retro PC Builds in 2026
- Logitech G29 vs HORI Force Feedback: Which Sim Wheel for Beginners?
- Build a Motion-Triggered Wildlife Camera on Raspberry Pi (2026)
- CompactFlash as a Silent IDE Boot Drive: A 1998-Era Build Log
- How to run Qwen 3 14B on NVIDIA GeForce RTX 3090
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090