Skip to main content
UCTRONICS Micro SD Male to Female Flexible Extender, 15cm/5.9in Micro SD Card Extension Cable Adapter Compatible with Raspberry Pi, Arduino, and 3D Printer, 4 Pack
UCTRONICS

UCTRONICS Micro SD Male to Female Flexible Extender

Bottom line: The UCTRONICS Micro SD Male to Female Flexible Extender ($15.99 on Amazon as of 2026-11-20 23:13 UTC): 15cm FFC ribbon reaches the front of a 1U/2U Pi rack; main trade-off: fits Raspberry Pi 4B/3B/3B+ B-series boards, not every SBC.

$15.99 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ 15cm FFC ribbon reaches the front of a 1U/2U Pi rack
  • ✓ Two mounting holes align with RPi plate screw holes
  • ✓ Push-push socket: press once to lock, again to eject

Cons

  • ✗ Fits Raspberry Pi 4B/3B/3B+ B-series boards, not every SBC
  • ✗ Flexible FFC ribbon is easier to crease than a rigid PCB
  • ✗ Screws are M2.5 only; other bracket threads need your own
  • ✗ 15cm fixed length may be long for a single-board setup

Manufacturer description

This SD card adapter is especially for the UCTRONICS designed for raspberry pi cluster solution, which is compatible with ASIN: B09BPX2VCB, B099RR1ZCT, B098924W9M, B09D7GY1CQ, and B09D7RR6NY.There is 2 hole on the adapter which is totally compatible with the screw hole of the RPi mounting plate.No more worry about accessing the SD card slot, just change it from the front of the rack instead of removing the entire plate. This is a great hack for length constraints with single-board computers.Packing List:4 pcs SD card flexible adapters8 pcs M2.5*4 screws.

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for UCTRONICS Micro SD Male to Female Flexible Extender, so this read rests on the manufacturer's listed specs and the current price in the storage adapters category (how we evaluate). Compare with similarly-priced alternatives in the storage adapters category before committing. On the listing's own facts, the case for it is "15cm FFC ribbon reaches the front of a 1U/2U Pi rack"; the main trade-off is "Fits Raspberry Pi 4B/3B/3B+ B-series boards, not every SBC". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, match it to the drive and the host: the drive interface it takes (SATA, NVMe or other), the drive sizes it accepts, whether it powers a 3.5" drive (desktop drives need 12V, which a USB port alone does not supply), and the USB or PCIe generation of the port you will plug it into, which caps the transfer speed. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • You Will Be Getting: 4 pieces of 15mm/5.9inch SD card flexible adapters. Specially designed for Raspberry Pi 4B/3B/3B+, and other B/B+ Models to stretch out its Micro SD card sockets.
  • As optional accessories for the Raspberry Pi 1U and 2U Rackmount. There is 2 holes on the adapter which is totally compatible with the screw hole of the RPi mounting plate.
  • Easy installation: Simply insert one section of the flexible board into the SD card slot, and fix the other end on the bracket with screws. The sockets are push-push, just insert the card in to lock, and press in again to release it.
  • Made of FFC, this SD card adapter can recognize SD cards quickly and is long enough without affecting the reading speed at all for your Raspberry Pi cluster project.

Full Specifications

BrandUCTRONICS
ColorFront Removable Raspberry Pi 1U Rack Mount
ModelU6192
Cable TypeSD
Item ShapeRound
Unit Count4 Count
Item Length15 centimeters
Part NumberU6192
Connector TypeMicro USB
Number of Pins5
Maximum Voltage5 volts_of_direct_current
Number of Items1
Special FeatureFlexible
Connector GenderMale-to-Female
Specification MetRohs, Fcc, Ce, Ul [Plausible]
Compatible DevicesPrinter
Indoor Outdoor UsageIndoor, Outdoor
Customer Package TypeFFP
Compatible Phone ModelsNo Compatible Phone Models
Recommended Uses For ProductExtending Micro SD card sockets of single-board computers (e.g., Raspberry Pi, Arduino) and 3D Printers
Full listing titleUCTRONICS Micro SD Male to Female Flexible Extender, 15cm/5.9in Micro SD Card Extension Cable Adapter Compatible with Raspberry Pi, Arduino, and 3D Printer, 4 Pack

Ready to buy?

UCTRONICS Micro SD Male to Female Flexible Extender, 15cm/5.9in Micro SD Card Extension Cable Adapter Compatible with Raspberry Pi, Arduino, and 3D Printer, 4 Pack is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $15.99

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related Storage Adapters

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →