be quiet! Light Wings 120mm PWM Premium Low Noise ARGB Cooling Fan | 4-Pin | 3-Pack | Black | BL076
Bottom line: The be quiet! Light Wings 120mm PWM Premium Low Noise ARGB Cooling Fan ($49.90 on Amazon as of 2026-10-21 10:26 UTC): 18 LEDs per fan, front and rear, so the glow reads from both sides of a glass build; main trade-off: six cables plus a hub for three fans, so routing gets busy in compact cases.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 18 LEDs per fan, front and rear, so the glow reads from both sides of a glass build
- ✓ ARGB hub included, syncs up to six ARGB components off one header
- ✓ 31 dB(A) at 2,500 rpm rated, with a rifle bearing good for 60,000 hours
- ✓ 4-pin PWM on all three fans for motherboard-controlled speed ramping
Cons
- ✗ Six cables plus a hub for three fans, so routing gets busy in compact cases
- ✗ No CFM or static-pressure figures listed, so radiator fit is hard to judge
- ✗ Hub caps at six ARGB components, so larger lighting loops need a controller
- ✗ Listing contradicts itself on blade count, citing both seven and nine
Manufacturer description
If you want addressable lighting without the whine that usually comes with it, the be quiet! Light Wings 120mm PWM three-pack (model BL076) is built around that tradeoff. Each of the three 4-pin fans carries 18 LEDs split across the front and rear of the frame, so the glow reads from both sides of a tempered-glass build instead of only the intake face. The included ARGB hub synchronizes up to six ARGB components, which means all three fans plus a strip or a block can run off a single header. be quiet! rates the silence-optimized blade design at 31 dB(A) at 2,500 rpm and the rifle bearing at…
SpecPicks Verdict
SpecPicks scored be quiet! Light Wings 120mm PWM Premium Low Noise ARGB Cooling Fan using a rating × review-volume × price-fit model applied to published specs and reviews across the PC & gaming hardware category. be quiet!'s PC & gaming hardware lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for PC & gaming hardware of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
What comes in the be quiet! Light Wings BL076 kit?
Three 120mm Light Wings PWM fans and one ARGB hub. All three fans use 4-pin PWM connectors, and the hub handles synchronization for up to six ARGB components total.
How loud are the Light Wings 120mm fans?
be quiet! rates them at 31 dB(A) at 2,500 rpm, which is their top speed. Because they are PWM-controlled, your motherboard can run them well below that during desktop and light-load use.
How long will these fans last?
The rifle bearing is rated for a 60,000-hour operating lifetime, roughly 6.8 years of continuous running. Warranty terms are not stated in the product data, so check the product listing for current coverage.
Will these ARGB fans sync with my motherboard lighting software?
The kit ships with a be quiet! ARGB hub that syncs up to six ARGB components, but the listing does not name specific motherboard software. Confirm the ARGB header standard on the product listing before buying.
Are the Light Wings good for an AIO radiator?
be quiet! describes a silence-optimized blade design aimed at high pressure, but publishes no static-pressure or CFM number, so radiator performance is not something the spec sheet confirms. For case intake and exhaust the 18-LED frames and PWM control are the clearer fit.
Key Features
- Three fans included and one HUB
- ARGB lighting on front and rear
- Multiple colors and modes for an individual look thanks to 18 LEDs
- ARGB Hub allows synchronization of up to six ARGB components
- Seven silence-optimized fan blades for high airflow and low noise-generating turbulences
Full Specifications
| Brand | be quiet! |
|---|---|
| Model | BL076 |
| Voltage | 12 volts |
| Wattage | 4.7 watts |
| Material | Copper |
| Set Name | PWM |
| Unit Count | 1 Count |
| Noise Level | 20.6 db |
| Part Number | BL076 |
| Material Type | Copper |
| Cooling Method | Fan |
| Number of Items | 3 |
| Air Flow Capacity | 41.5 cfm |
| Compatible Devices | Desktop |
| Included Components | Fan |
| Power Connector Type | 4-Pin |
| Warranty Description | 1 year |
| Maximum Rotational Speed | 1700 rpm |
| Item Dimensions L x W x H | 5.51"L x 0.98"W x 5.51"H |
| Global Trade Identification Number | 04260052188804 |
Ready to buy?
be quiet! Light Wings 120mm PWM Premium Low Noise ARGB Cooling Fan | 4-Pin | 3-Pack | Black | BL076 is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Voodoo3 3000 vs GeForce 256: 1999 Glide vs OpenGL Showdown
- ZOTAC vs MSI RTX 3060 12GB: Which Twin-Fan Card Should You Buy in 2026?
- Best SSD for Expanding Your Steam Library in 2026: SATA Value Picks
- Logitech Gaming Mouse Deals Hit 47% Off for Prime Day 2026
- Turtle Beach Recon 50 in 2026: Is the $40 Gaming Headset Still Worth It?
- Unified RAM for LLMs: 2025-2026 Hardware Guide
- Does a Gaming Mouse Pad Actually Improve Your Aim? QcK vs Generic
- Zhipu ZCode vs Claude Code: Cheaper Agentic Coding, and the Rig to Run It
- Best GPU for ComfyUI and SDXL Under $400 in 2026
- Why NVIDIA Killed 3dfx: How the Voodoo Brand Still Haunts Modern GPU Launches
- Ryzen 7 5800X vs Ryzen 7 5700X for 2026 Budget Gaming Builds
- Best Gaming CPU for 1440p Builds in 2026
- Noctua-Style Pi 5 NAS Build Goes Viral — Here's the Parts List
- Silent Cooling for a Retro Sleeper PC: Fitting a Modern Quiet Fan to a Vintage Case
- Build a Raspberry Pi 4 Cyberdeck Music Workstation in 2026
- AMD Ryzen AI Max+ PRO 495 192GB: What the PassMark Leak Tells Us
- Best Budget Streaming Starter Kit for 2026 (Under $200)
- CompactFlash as Your IDE Hard Drive: A Silent, Reliable Retro PC Boot Disk
- Cisco's Open Security LLMs: Local Vulnerability Scanning on an RTX 3060
- Local PDF-to-Audiobook on a Raspberry Pi 5: Kokoro 82M + Qwen + llama.cpp
- Best CPU Cooler for Gaming PCs in 2026: Air & AIO Picks
- Inkling 975B Open Weights: What a Frontier Speech Model Means for Local Rigs
- Troubleshooting Ryzen 7 5800X Memory Training, Boot Loops, and Cold-Start Hangs on B550 in 2026
- Intel Arc A770 for Local LLMs: 2026 Benchmark Guide
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090