VONETS VAP11G-300 2.4G Mini WiFi Bridge/Repeater/Signal Booster with 1 RJ45
Bottom line: Per its Amazon listing, the VONETS 2.4G Mini WiFi Bridge/Repeater/Signal Booster with 1 RJ45 ($26.98 on Amazon as of 2026-11-21 23:24 UTC): 2.4GHz WiFi rate: 300Mbps.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ 2.4GHz WiFi rate: 300Mbps
- ✓ Backed by Vonets's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for VONETS 2.4G Mini WiFi Bridge/Repeater/Signal Booster with 1 RJ45, so this read rests on the manufacturer's listed specs and the current price in the retro networking cards category (how we evaluate). Compare with similarly-priced alternatives in the retro networking cards category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【New Upgrade】 New Process Design, Super Stability.Mini WiFi Bridge/Wireless Repeater allows most Ethernet devices to access the Internet through wireless connection, allowing Ethernet to WiFi or WiFi to Ethernet function
- 【Support Bridge/Repeater/AP mode】Support three application modes: 1. WiFi Smart Bridge: WiFi to wired or wired to WiFi function; 2. WiFi Smart Repeater, which can enhance WiFi signal and extend WiFi transmission distance (support WiFi hotspot auto-scan and WiFi hotspot memory function); 3. WiFi Smart Access Point: as a wireless AP Use for other wireless devices WiFi connection
- 【Wireless/Wired Technical Parameters】2.4GHz WiFi rate: 300Mbps, support 802.11b/g/n protocol; point-to-point transmission distance: up to 80m without obstacles and small data, less than 50m when used for video transmission; 1*30cm power cable with 1*DC or USB optional port, support wide voltage DC 5V-15V (typical 5V/1 A, ripple less than 100mV), 1 RJ45 network cable (10/100M adaptive)
- 【Applicable to A Variety of Network Devices】It is a good partner for network applications such as electronic scales, DVR, IP cameras, medical devices, IoT devices, video transmission, industrial PLC, PS3, printers, robots, etc
- 【Warm Tips】Please check the manual or configuration video in detail before use for a successful one-time configuration, if you have any questions, please contact htxus2021@163.com for solutions
Full Specifications
| Brand | Vonets |
|---|---|
| Color | 2.4G WiFi Bridge |
| Range | 50-80 Meters |
| Weight | 11g |
| Frequency | 2.4 GHz |
| Unit Count | 1.0 Count |
| Connectivity | Wireless, USB, WiFi, 2.4GHz |
| Model Number | VAP11G-300 |
| Compatibility | PS3 |
| Built-In Media | chip |
| Connector Type | RJ45, USB |
| Item Type Name | WiFi Bridge |
| Connection Type | Wired |
| Mfr Part Number | VAP11G-300 |
| Special Feature | TAFC Technology, VDNS Virtual Domain Configuration, Multi-Terminal Support, Wide Voltage & Low Power Consumption, Reset Button, Advanced Security Mechanisms, Multiple Operating Modes |
| Special Features | TAFC Technology, VDNS Virtual Domain Configuration, Multi-Terminal Support, Wide Voltage & Low Power Consumption, Reset Button, Advanced Security Mechanisms, Multiple Operating Modes |
| Compatible Devices | Security Camera |
| Data Transfer Rate | 300 Megabytes Per Second |
| Frequency Band Class | Dual-Band |
| Warranty Description | one year warranty |
| Full listing title | VONETS VAP11G-300 2.4G Mini WiFi Bridge/Repeater/Signal Booster with 1 RJ45,Powered by DC/USB for DVR, IP Camera,PS3 |
Ready to buy?
VONETS VAP11G-300 2.4G Mini WiFi Bridge/Repeater/Signal Booster with 1 RJ45,Powered by DC/USB for DVR, IP Camera,PS3 is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Retro Networking Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best SSD for a Big Steam Library: Crucial BX500 1TB vs WD Blue
- How to Make Steam Deck Intros Last Longer (2026)
- RetroArch PS2 Emulation: Setup, BIOS & Performance Guide
- OpenAI vs Anthropic Token Price War: When a $300 GPU Wins
- Cloning a Win98 Voodoo3 Boot Drive: SATA-IDE Adapter Workflow
- 3D Printed Glow-Spike Bracelet: Adafruit Builder's Guide 2026
- Ryzen 5 5600G vs Core i7-9700K for a Budget 1080p Gaming Build
- Best Used Ryzen CPU for Budget AM4 Gaming Upgrades in 2026
- HyperX QuadCast 2 vs Blue Yeti: Best USB Mic for Game Streaming in 2026
- Copilot Cowork Goes Usage-Based: The Local-Rig Cost Case in 2026
- HyperX QuadCast 2 S vs Blue Yeti for Streaming in 2026
- That $850 Prebuilt With $1,200 of Parts: What the Math Actually Says
- Nemotron 3 Ultra vs MiniMax M3: Best Open Model for a 12GB Rig
- Best Retro Gaming Storage Adapters for Win98 and DOS PCs in 2026
- Retro Nintendo Switch 2 Dock Channels the N64 and Holds Six Game Cards
- Qwen3.6-35B-A3B vs Gemma4-26B-A4B: Which MoE Fits a 12GB RTX 3060
- Intel Arc for Stable Diffusion: ComfyUI + A1111 setup (2026)
- Intel's Bartlett Lake Core 9 273PQE Loses to a Four-Year-Old CPU
- Can an RTX 3060 12GB Still Run 2026's Local LLMs?
- Ryzen 7 9800X3D Hits Record-Low Price — What It Means for AM4 Upgraders
- Claude Code Ran Hidden Repo Malware Unverified — Why Local AI Sandboxing Matters
- Qwen 3.6 27B at 2x tok/s: Luce DFlash on One RTX 3090
- Troubleshooting Voodoo 5 5500 PCI Driver Hangs on Windows 98 SE: Field Guide
- Dual RTX 3060 12GB vs RTX 3090 24GB for Qwen2.5 32B (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090