ARCTIC S4028-6K (5 Pack)
Bottom line: The ARCTIC S4028-6K: Dual ball bearings resist heat and dust in cramped 1U racks; main trade-off: 6000 RPM top speed is loud enough to be audible across a room.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Dual ball bearings resist heat and dust in cramped 1U racks
- ✓ Wide 250-6000 RPM PWM range trades noise for airflow on demand
- ✓ 4.2 mm/H2O static pressure pushes air through dense radiator fins
- ✓ 40 cm cable reaches distant headers in deep rack chassis
Cons
- ✗ 6000 RPM top speed is loud enough to be audible across a room
- ✗ 12.06 m3/h airflow is modest, typical of the 40 mm format
- ✗ 28 mm thickness will not fit slim 40x40x10 or 20 mm mounts
- ✗ Ball bearings hum more at idle than fluid-dynamic alternatives
SpecPicks Verdict
SpecPicks scored ARCTIC S4028-6K using a rating × review-volume × price-fit model applied to published specs and reviews across the retro cpu coolers & fans category. ARCTIC's retro cpu coolers & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- The S4028-6K's impeller is held in place by two ball bearings, making it both especially durable as well as less sensitive to external influences such as heat and dust
- The S4028-6K has a particularly wide speed range that can be regulated via PWM and voltage. With its 6000 RPM max it offers a well-balanced ratio between cooling power and noise
- With a static pressure of 4.2 mm/H2O and a maximum airflow of 12.06 m³/h, the S4028-6K is a true all-rounder and is suitable as both radiator and case fan
- The S4028-6K fits in 1U server cases as a replacement fan for routers, switches, and NAS. It can also be used for other products such as DVRs, Mini PCs, HTPCs, hard disk enclosures and 3D printers
- The fan has a standard 4-pin fan connector and can also be connected and controlled on 2-pin or 3-pin headers, while its 40 cm cable allows enough flexibility in positioning
Full Specifications
| Brand | ARCTIC |
|---|---|
| Color | Black |
| Model | ACFAN00273A |
| Voltage | 12 volts |
| Wattage | 1.2 watts |
| Material | Polycarbonate |
| Dimensions | 40x40x28 mm |
| Unit Count | 5 Count |
| Noise Level | 38 db |
| Part Number | ACFAN00273A |
| Material Type | Polycarbonate |
| Cooling Method | Air |
| Number of Items | 5 |
| Air Flow Capacity | 7.1 cfm |
| Compatible Devices | Printer, Server |
| Power Connector Type | 2510 4-Pin Fan-Connector |
| Maximum Rotational Speed | 6000 rpm |
| Item Dimensions L x W x H | 1.57"L x 1.1"W x 1.57"H |
| Full listing title | ARCTIC S4028-6K (5 Pack) - 40x40x28 mm Server Fans, 250–6000 RPM, PWM Regulated, 4-pin Connector, 12 V DC, Rack Cooling Fan - Black |
Ready to buy?
ARCTIC S4028-6K (5 Pack) - 40x40x28 mm Server Fans, 250–6000 RPM, PWM Regulated, 4-pin Connector, 12 V DC, Rack Cooling Fan - Black is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Local AI Video After Seedance 2.5: What GPU Generates 30-Second Clips
- What Handheld Console Should I Buy in 2026? A Decision Framework
- Best Streaming & Content-Creation Starter Kit in 2026
- Best Budget 4K Gaming Monitor for an RTX 3060: KOORUI vs Samsung Odyssey
- Fix Windows 98 SE on 1GB+ RAM: The Vcache Gotcha
- Best Noctua and Quiet-Tier CPU Coolers in 2026
- Best Adaptive and One-Handed Gaming Controllers in 2026
- Best Components for a Budget Local-LLM Workstation in 2026
- How to run Llama 3.1 70B on Arc B580
- Raspberry Pi 5 + AI HAT: Five Computer-Vision Projects That Actually Run in Real Time
- How to run Qwen 3 14B on AMD Radeon RX 7900 XTX
- AI-Driven Win98 LAN Party Server Config Generation
- Build a Raspberry Pi 4 AirPlay Receiver in 2026: Full Walkthrough
- Logitech G920 vs HORI Racing Wheel: Best Beginner Sim Setup (2026)
- First-Time Steam Deck Emulation Setup: A Complete Guide
- Best Budget AM4 Gaming Build Parts in 2026
- Intel IPEX-LLM vs Ollama on AMD: AI Rig Guide 2025
- ATI Radeon 9700 Pro Install Guide: Catalyst Versions, AGP 8x Compatibility, and Period-Correct Drivers
- Boot Windows 98 from CompactFlash: A Silent, Reliable CF-to-IDE Build
- RTX 3080 vs RTX 5080 — is it time to upgrade?
- Best 12GB GPU for Stable Diffusion: RTX 3060 in 2026
- Oomwoo Is a New Open-Source Robot Vacuum You Can 3D Print
- AMD Ryzen 7 7700X3D Review: 7800X3D's OEM-Only Rival
- SATA vs NVMe for a Ryzen 5800X Gaming Build: Does It Matter?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090