MOOKEERF RG8X BNC Male to BNC Male Coaxial Cable 6FT 50 ohm Ultra Low Loss for Antenna
Bottom line: The MOOKEERF RG8X BNC Male to BNC Male Coaxial Cable 6FT 50 ohm Ultra Low: BNC male to BNC male, 50 ohm impedance matches most RF and test gear; main trade-off: fixed 6ft length; longer runs need another cable or a barrel adapter.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ BNC male to BNC male, 50 ohm impedance matches most RF and test gear
- ✓ Rated -2.65dB attenuation over 25ft at 1800MHz
- ✓ VSWR rated at 1.15 or lower for a clean impedance match
- ✓ Pure copper center conductor with 95% tinned copper braid shield
- ✓ 2.2-inch adhesive tube on each connector resists pull-out
Cons
- ✗ Fixed 6ft length; longer runs need another cable or a barrel adapter
- ✗ RG8X is thicker and stiffer than RG58 or RG174 for tight bench routing
- ✗ BNC only; SMA, N-type or UHF gear needs adapters
- ✗ No maximum frequency or power handling rating listed
Manufacturer description
The MOOKEERF RG8X BNC coaxial cable is a 6ft BNC male to BNC male jumper with 50 ohm impedance. It's built for RF and test-bench work where you need a stable signal path between instruments, antennas and radios. MOOKEERF rates the RG8X line at -2.65dB of attenuation over 25ft at 1800MHz, with VSWR held at 1.15 or lower. That makes it a solid pick for connecting an oscilloscope, spectrum analyzer or signal generator without adding much loss. The center conductor is pure copper, shielded by a 95% tinned copper braid. Each connector is secured with a 2.2-inch adhesive tube, so it resists…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for MOOKEERF RG8X BNC Male to BNC Male Coaxial Cable 6FT 50 ohm Ultra…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro crt & display accessories category before committing. On the listing's own facts, the case for it is "BNC male to BNC male, 50 ohm impedance matches most RF and test gear"; the main trade-off is "Fixed 6ft length; longer runs need another cable or a barrel adapter". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
What impedance is the MOOKEERF RG8X BNC cable?
It is a 50 ohm cable. That matches most RF radios, antennas, oscilloscopes, spectrum analyzers and signal generators. It is not intended for 75 ohm video equipment.
How much signal loss does this cable have?
MOOKEERF rates its RG8X cable at -2.65dB of attenuation over 25ft at 1800MHz, with VSWR at 1.15 or lower. Loss is not listed separately for this 6ft length.
Will it work with my oscilloscope or signal generator?
Yes, if both devices have BNC ports. Both ends are BNC male, and the cable is listed as compatible with oscilloscopes, spectrum analyzers, signal generators, splitters, 3G/4G/LTE antennas and network systems.
Can I use this coax cable outdoors?
The PVC jacket is described as waterproof and oxidation resistant, and the manufacturer says it is suited to long-term outdoor use. Weatherproofing the connector joints is still good practice for permanent antenna installs.
How long is the cable, and what is it made of?
It is 6ft long. It uses a pure copper inner conductor, a 95% tinned copper braid shield and a PVC jacket, and each connector is secured with a 2.2-inch adhesive tube.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- [Specification]-Connector: BNC male to BNC male, impedance: 50 ohm, Cable type: RG8X.
- [Ultra Low Loss]-The RG8X jumper cable got a professional structure and take good advantage in transmit data with lower signal attenuation that low to -2.65db(25ft,1800MHz) and keep VSWR≤1.15.
- [Firm Connected]-We fix the connector with 2.2" adhesive tube and it will not easy to fall off from the cable. And that can provide a heavy duty and firmly connection, really durable and professional coaxial cable.
- [High Grade Material]-This RG8X BNC cable inner conductor is made by pure copper and build with 95% tinned copper braid, that can make sure the signal transmission efficiently and stable. The PVC jacket is waterproof and has strong oxidation resistance, and can be adapted to outdoor for a long time
- [Widely Application]-Compatible with device which contain BNC connector, including splitter, 3G/4G/LTE antenna, Oscilloscope, Spectrum, Analyzer and Network systems etc.
Full Specifications
| Brand | MOOKEERF |
|---|---|
| Color | Black |
| Model | 607986647894 |
| Weight | 3g |
| Frequency | 2 GHz |
| Cable Type | Coaxial |
| Item Shape | Round |
| Unit Count | 1 Count |
| Part Number | RG8X-BNC-JJ-6FT |
| Connector Type | BNC |
| Number of Pins | 2 |
| Outer Material | Polyvinyl Chloride (PVC) |
| Number of Items | 1 |
| Special Feature | gps |
| Connector Gender | Male-to-Male |
| Compatible Devices | Router |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Warranty Description | 30 Days Warranty |
| [Specification]-Connector | BNC male to BNC male, impedance: 50 ohm, Cable type: RG8X. |
| Recommended Uses For Product | Connecting and transmitting signals between radio communication devices, testing and measurement equipment, and networking components |
| Full listing title | MOOKEERF RG8X BNC Male to BNC Male Coaxial Cable 6FT 50 ohm Ultra Low Loss for Antenna, RF Radio, Modem, Oscilloscope, Spectrum, Analyzer, Signal Generator |
Ready to buy?
MOOKEERF RG8X BNC Male to BNC Male Coaxial Cable 6FT 50 ohm Ultra Low Loss for Antenna, RF Radio, Modem, Oscilloscope, Spectrum, Analyzer, Signal Generator is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CRT & Display Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Troubleshooting Voodoo 5 5500 PCI Driver Hangs on Windows 98 SE: Field Guide
- Anthropic Raises $65B Series H Near a Trillion-Dollar Valuation: What It Means for Local-AI Builders
- Asus ROG Xreal R1 AR glasses pre-orders start today at $849 — 240 Hz virtual gaming at 171 inches on PC…
- Adding USB Audio to a Retro Windows XP Gaming PC: Sound BlasterX G6
- Ah Yes, 'Gaming' Laptops: The Hype vs. Reality
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5080
- Best AMD CPU for Gaming in 2026: Our Top 5 Ryzen Picks
- N100 Mini PC vs Raspberry Pi 4 for Home Assistant in 2026
- DIY Pinball Controller for Retro Gaming: Build Guide
- oQ vs Q4_K/Q6_K vs MXFP4 vs UD-MLX: Which Quantization Format Should You Pick in 2026?
- Best Budget 4K Gaming Monitor in 2026
- Voodoo3 3000 PCI vs AGP — Driver Install Troubleshooting in 2026
- Crucial BX500 vs Samsung 870 EVO for Budget & Retro Builds
- Claude Fable 5 Launches at #1 on the Intelligence Index — What Local Builders Should Take Away
- Best Budget SATA SSD for Gaming PC Builds in 2026: 5 Picks Tested for Steam Library Speed
- How to Run a SATA SSD on a Windows XP Retro Gaming PC (AHCI + Adapters)
- Are We the Last Generation of PC Builders?
- Sound Blaster G6 in a Period-Correct WinXP Build: Modern USB DAC Meets Vintage Hardware
- Raspberry Pi 4 as an SMB1 File Server for Windows 98 Retro Rigs
- Razer Soma Chroma Gaming Chair Review: RGB vs. Adjustability
- Best Controller for Steam Deck Docked Mode in 2026
- Raspberry Pi 500 Specs, Price & Real-World Use in 2026
- Horse Riding Game Controller for PC/Mac: Buy or Build
- Best X870E Motherboards for the Ryzen 7 9800X3D in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090