CRJ Electronics CRJ 3-Pin Fan Header to 12V 4-Pin Molex Power Adapter Cable
Bottom line: The CRJ 3-Pin Fan Header to 12V 4-Pin Molex Power Adapter Cable is a specs-and-price decision rather than a crowd-consensus one in the power supplies & cables category, priced around $7.99 on Amazon as of 2026-10-06. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Total cable length (including connectors) is 12 inches (30cm)
- ✓ Backed by CRJ Electronics's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
This cable is as simple as it appears. Power watercooling pumps and other 12V 4-pin devices using a fan header. The output current is limited to the capabilities of the fan header that this cable is connected to. Modern PC motherboards are now commonly available with higher output current capacity fan headers (W_PUMP+ fan header on ASUS motherboards as an example). Due to the possibility of connecting things not intended for a fan header the exercise of due diligence is absolutely necessary. Please reference the manufacturer documentation of your devices to avoid current overdraw.
SpecPicks Verdict
SpecPicks scored CRJ 3-Pin Fan Header to 12V 4-Pin Molex Power Adapter Cable using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies & cables category. CRJ Electronics's power supplies & cables lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Designed specifically to eliminate the need for a power supply 4-pin peripheral molex connection due to the high output current fan headers found on many modern ATX motherboards.
- Compatible with 4-pin peripheral molex power water pumps and other 12V input devices (please exercise due diligence to avoid damage from current overdraw and disable 3-pin fan speed control in BIOS to ensure 12V output from the fan header)
- RoHS Compliant. Each cable is constructed with all black connectors and high density black sleeving for minimal wire visibility.
- NOTE: Please take care to align the pins when making the 4-pin peripheral connection as they are under some tension from the sleeving.
- Total cable length (including connectors) is 12 inches (30cm)
Full Specifications
| NOTE | Please take care to align the pins when making the 4-pin peripheral connection as they are under some tension from the sleeving. |
|---|---|
| Brand | CRJ Electronics |
| Model | 4058 |
| Material | Polycarbonate (PC) |
| Cable Type | Fan Header Cable |
| Unit Count | 1.0 Count |
| Item Length | 12 Inches |
| Part Number | 4058 |
| Compatibility | PC |
| Material Type | Polycarbonate (PC) |
| Wire Diameter | 0.64 Millimeters |
| Connector Type | 3-pin Fan, 4-pin Molex |
| Recommended Uses For Product | Powering 12V 4-pin devices from a PC's fan header |
| Full listing title | CRJ 3-Pin Fan Header to 12V 4-Pin Molex Power Adapter Cable - 12 inch (30cm), Black Sleeved - Power 4-Pin Peripheral Molex Devices from PC Fan Headers |
Ready to buy?
CRJ 3-Pin Fan Header to 12V 4-Pin Molex Power Adapter Cable - 12 inch (30cm), Black Sleeved - Power 4-Pin Peripheral Molex Devices from PC Fan Headers is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Sound Blaster AWE32/AWE64 to Audigy: The Right Sound Card for Every Retro Era
- Best Webcam for Streaming and Remote Work in 2026
- Datacenter GPU in a Gaming PC for £200: Is It Worth It?
- Voodoo3 3000 PCI vs AGP — Driver Install Troubleshooting in 2026
- Running Gemma 4 31B Finetunes Locally: Dual RTX 3060 12GB vs Single 24GB Card
- Best Controller for Raspberry Pi Retro Emulation in 2026
- Retro Game Emulator for TV: 2025 Setup & GPU Guide
- Qwen3.6-27B on Dual RTX 3060 12GB: The $400 30-50 tok/s Local LLM Build
- RTX 5080 vs RX 9070 XT
- Audio DSP Firmware for the Raspberry Pi Pico: A 2026 Guide
- Ryzen 7 9800X3D vs Ryzen 9 9900X3D: Which Zen 5 X3D Chip Wins in 2026?
- MiMo-V2.5-Pro Local Hardware Requirements: VRAM, Tok/s, and Quantization on Consumer GPUs
- Aider vs Cline vs Cursor for AI-Assisted Coding in 2026
- Best Sim Racing Wheel for Beginners: G29 vs HORI vs Thrustmaster
- Ollama vs llama.cpp vs vLLM — which local LLM runtime wins in 2026?
- Solar-Powered Bird Identifier: Raspberry Pi Zero 2W + AI Camera
- Playing Pokémon on Steam Deck: The Real 2026 Guide
- Air vs AIO for the Ryzen 7 5800X: Noctua NH-U12S vs CoolerMaster ML240L
- Best IDE-to-USB Adapter for Retro PC Data Recovery: FIDECO vs Unitek vs Vantec
- RTX 3060 12GB vs RTX 3090 for Local LLMs (2026)
- Pentium III Coppermine vs Tualatin: Which 2001 LAN Build CPU Aged Better
- Step 3.7 Flash Benchmarks: What You Can Actually Run on 12GB
- Best SSD for Raspberry Pi Boot (2026): USB SATA vs NVMe
- 8BitDo Pro 2 vs GameSir G7 SE vs DualSense: the best PC controller for retro emulation in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090